Hitachi Projector CP-WX8650 User Manual

							81
SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
LANGUAGE Using the ▲/▼/◄/► buttons switches the OSD (On Screen 
Display) language.
ENGLISH  ó FRANÇAIS 
ó DEUTSCH 
ó  ESPAÑOL
       
   (shown in the LANGUAGE dialog)   
Press the 
ENTER or INPUT  button to save the language setting.
MENU POSITION Using the ▲/▼/◄/► buttons adjusts the menu position.
To quit the operation, press the 
MENU button on the remote control 
or keep no operation for about 10 seconds.
BLANK
Using the ▲/▼ buttons switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature 
(
 37
). It is displayed by pressing the  AV MUTE button on the 
remote control.
MyScreen  ó ORIGINAL 
ó BLUE 
ó WHITE 
ó BLACK
       
MyScreen :  Screen can be registered by the MyScreen item ( 83
).
ORIGINAL  :  Screen preset as the standard screen.
BLUE, WHITE, BLACK :   Plain screens in each color.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL
screen will change to the AUTO BLANK screen after several 
minutes.
(continued on next page) 
						

							82
SCREEN menu
ItemDescription
AUTO BLANK Using the ▲/▼ buttons switches the mode for the AUTO BLANK 
screen.
BLUE  ó WHITE 
ó BLACK
       
• To avoid remaining as an afterimage, displayed image will change
to the designated blank color screen by AUTO BLANK after several
minutes at the following conditions.
- When MyScreen or ORIGINAL is displayed as BLANK screen.
- When start-up screen is displayed.
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.
The start-up screen is a screen displayed when no signal or an 
unsuitable signal is detected. MyScreen  ó ORIGINAL 
ó OFF
       
MyScreen :  Screen can be registered by the MyScreen item ( 83
).
ORIGINAL  :  Screen preset as the standard screen.
OFF  :  Plain black screen.
• To avoid remaining as an afterimage, the START UP screen will 
change to the AUTO BLANK screen after several minutes. 
• When the ON is selected to the MyScreen PASSWORD item in 
the SECURITY menu (
 102
), the START UP is fixed to MyScreen.
(continued on next page) 
						

							83
SCREEN menu
ItemDescription
MyScreen This item allows you to capture an image for use as a MyScreen 
image which can be used as the BLANK screen and START UP 
screen. Display the image you want to capture before executing the 
following procedure.
(1)  
Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if 
you start capturing an image from 
the current screen. Please wait for the target image to be displayed, and press 
the  ENTER  or INPUT  button when the image is displayed. The 
image will freeze and the frame for capturing will appear. 
To stop performing, press the  RESET button on the remote 
control. 
(2)   Using the ▲/▼/◄/► buttons adjusts 
the frame position.  
Please move the frame to the position 
of the image which you want to use. The 
frame may not be able to be moved for 
some input signals.  
To start registration, press the  ENTER 
or  INPUT  button on the remote control.
To restore the screen and return to the previous dialog, press the 
RESET  button on the remote control. 
Registration may take several minutes.  
When the registration is completed, the registered screen and 
the following message is displayed for several seconds:
“MyScreen registration is finished.”
If the registration failed, the following message is displayed: “A capturing error has occurred. Please try again.” 
• This function cannot be selected when the ON is selected to the 
MyScreen Lock item (
 84
).
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in SECURITY menu (
 102
).
• This function is unavailable for a signal from the  LAN, HDMI 1 / 2, 
HDBaseT  or SDI  port.
(continued on next page) 
						

							84
SCREEN menu
ItemDescription
MyScreen Lock Using the ▲/▼ buttons turns on/off the MyScreen lock function.
ON  ó OFF
When the ON is selected, the item MyScreen is locked. Use this 
function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 
MyScreen PASSWORD item in SECURITY menu (
 102
).
SOURCE NAME Each input port for this projector can have a name applied to it.
(1)  
Use the ▲/▼ buttons on the SCREEN menu to select SOURCE 
NAME and press the ► or  ENTER button.  
The SOURCE NAME menu will be displayed.
(2)   Use the ▲/▼ buttons on the SOURCE NAME menu to select 
the port to be named and press the ► button. The SOURCE 
NAME dialog will be displayed.  
Right side of the menu is blank until a name is specified.
(3)   Select an icon you would like to assign to 
the port in the SOURCE NAME dialog.   
The name assigned to the port will also 
be automatically switched according to 
your icon selection. Press  the ENTER  
or  INPUT  button to determine your icon 
selection.
(4)   Select a number you would like to assign 
to the port along with the icon. You can 
select the number either from blank (no 
number assigned), 1, 2, 3, or 4.  
Then press the  ENTER or INPUT  button.
(5)   If you would like to modify the name assigned to the port, select 
CUSTOM NAME and press the  ENTER or INPUT  button. 
(continued on next page)
CP-WU8700
CP-WU8600/CP-WX8650
CP-WX8750/CP-X8800
CP-WU8600/CP-WX8650CP-WX8750/CP-X8800 CP-WU8700 
						

							85
SCREEN menu
ItemDescription
SOURCE NAME (continued )(6) 
 
The current name will be displayed on 
the first line. Use the ▲/▼/◄/► buttons 
and the  ENTER or INPUT  button to 
select and enter characters. To erase 1 
character at one time, press the  RESET 
button or press the ◄ and  INPUT button 
at the same time. Also if you move the 
cursor to DELETE or CLEAR ALL on 
screen and press the  ENTER or INPUT  
button, 1 character or all characters will 
be erased. The name can be a maximum 
of 16 characters.
(7)    To change an already inserted character, 
press the ▲ button to move the cursor to 
the first line, and use the ◄/► buttons to 
move the cursor on the character to be 
changed. 
After pressing the  ENTER or INPUT  button, the character is 
selected.  Then, follow the same procedure as described at the 
item (6) above.
(8)    To finish entering text, move the cursor to the OK on screen and 
press the ►,  ENTER or INPUT  button. To revert to the previous 
name without saving changes, move the cursor to the CANCEL 
on screen and press the ◄,  ENTER or INPUT  button.
TEMPLATE Using the ▲/▼ cursor buttons switches the mode for the template 
screen.
Press the ► cursor (or the 
ENTER) button to display the selected 
template, and press the ◄ cursor button to close the displayed 
screen.
The last selected template is displayed when the  MY BUTTON
allocated to the TEMPLATE function is pressed (
 89
).
TEST PATTERN  ó DOT-LINE1 
ó DOT-LINE2 
ó DOT-LINE3
                                                                                          

STACK  ó 
MAP2 
ó MAP1 
ó CIRCLE2 
ó CIRCLE1 
ó DOT-LINE4
You can turn a map upside down and scroll it horizontally when 
MAP1 or MAP2 is selected. To invert or scroll the map, display 
the guidance by pressing the  RESET button on the remote three 
seconds or more when MAP1 or MAP2 appears.
(continued on next page) 
						

							86
SCREEN menu
ItemDescription
C.C.
(Closed Caption) The C.C. is the function that displays a 
transcript or dialog of the audio portion of 
a video, files or other presentation or other 
relevant sounds. It is required to have NTSC 
format video or 480i@60 format component 
video source supporting C.C. feature to 
utilize this function.
It may not work properly, depending on equipment or signal source. 
In this case, please turn off the Closed Caption.
DISPLAY
Select Closed Caption DISPLAY setting from following options using 
▲/▼ buttons.
AUTO  ó ON 
ó OFF 
   
AUTO :   Closed Caption automatically appears when the input signal 
(C.C. compatible) from the port with the mute icon set at 
AUDIO SOURCE is selected.
ON : Closed Caption is on.
OFF  : Closed Caption is off.
• The caption is not displayed when the OSD menu is active.
• The Closed Caption is the function to display the dialogue, 
narration, and / or sound effects of a television program or other 
video sources. The Closed Caption availability is depending upon 
broadcaster and/or content.
MODE
Select Closed Caption MODE setting from following options using 
▲/▼ buttons. CAPTIONS  ó TEXT
CAPTIONS : Display Closed Caption.
TEXT  :  Display Text data, which is for additional information such as 
news reports or a TV program guide. The information covers 
the entire screen. Not all of the C.C. program has Text 
information.
CHANNEL
Select Closed Caption CHANNEL from following options using ▲/▼ 
buttons.
1 ó  2 
ó 3 
ó 4
1: Channel 1, primary channel / language
2: Channel 2
3: Channel 3
4: Channel 4
The channel data may vary, depending on the content. Some 
channel might be used for secondary language or empty. 
						

							87
OPTION menu
OPTION menu
From the OPTION menu, items shown in the table 
below can be performed. 
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.
ItemDescription
SOURCE SKIP The ports can be set to be ignored in searching by the AUTO 
SEARCH function 
(
below
) or in selecting by buttons on the control 
panel. 
(1)   Choose a picture input port using the ▲/▼ buttons.
(2)   Using the ◄/►buttons turns on/off the SOURCE SKIP function.
NORMAL  ó SKIP
The port that is set to SKIP will be ignored.
• It is not possible to set SKIP to all ports at the same time.
• This setting is not valid when in the PbyP /PinP mode (
 53
).
AUTO SEARCH Using the ▲/▼ buttons turns on/off the automatic signal search 
function.
ON  ó OFF
When the ON is selected, detecting no signal automatically cycles 
through input ports in the following order. The search is started from 
the current port. Then when an input is found, the projector will stop 
searching and display the image.
          LAN   ð   COMPUTER IN 
ð   HDMI 1 
                             
 
        VIDEO                                    HDMI 2 
 
                           
          SDI*    ï   HDBaseT
   
ï    DisplayPort
* CP-WU8700 only
(continued on next page)
CP-WU8600/CP-WX8650   CP-WX8750/CP-X8800 CP-WU8700 
						

							88
OPTION menu
ItemDescription
DIRECT POWER  ON Using the ▲/▼ buttons turns on/off the DIRECT POWER ON 
function.
ON  ó OFF
When set to the ON, the lamp in projector will be automatically turned 
on without the usual procedure (
 35
), only when the projector is 
supplied with the power after the power was cut while the lamp was on.
• This function does not work as long as the power has been 
supplied to the projector while the lamp is off.
• After turning the lamp on by the DIRECT POWER ON function, 
if neither input nor operation is detected for about 30 minutes, the 
projector is turned off, even though the AUTO POWER OFF function 
(
 below
) is disabled.
AUTO POWER  OFF Using the ▲/▼ buttons adjusts the time to count down to 
automatically turn the projector off.
Long (max. 99 minutes)  ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off 
automatically.
When the time is set to 1 to 99, and when the passed time with   
no-signal or an unsuitable signal reaches at the set time, the 
projector lamp will be turned off. 
If one of the projector's buttons or the remote control buttons 
is pressed or one of the commands (except get commands) is 
transmitted to the  CONTROL port during the corresponding time, 
projector will not be turned off.
Please refer to the section  Turning off the power (
35
).
SHADE TIMER Using the ▲/▼ buttons sets the time from closing the lens shade to 
automatically turning the projector off.
1h  ó 3h 
ó 6h 
• The shade will open automatically when turning the projector on 
again.
(continued on next page) 
						

							89
OPTION menu
ItemDescription
MY BUTTON
This item is to assign one of the following functions to  MY BUTTON 
( 1  to  4) on the remote control (
 7
).
(1)   Use the ▲/▼ buttons on the MY BUTTON menu to select a 
button from MY BUTTON - 1 to 4 and press the ► or  ENTER 
button to display the MY BUTTON setup dialog. 
(2)   Then using the ▲/▼/◄/► buttons sets one of the following 
functions to the chosen button. Press the  ENTER or INPUT  
button to save the setting.
MY IMAGE : Displays the MY IMAGE menu.(
5. My Image 
Function  in the  Network Guide )
MESSENGER: Turns the messenger text displayed on the screen  on/off (
 6. Messenger Function
 in the  Network Guide ). 
When there is no transferred text data to display, the message 
”NO MESSENGER DATA" appears.
BLANK: Switches the BLANK function to on or off.
SHADE: Turns the lens shade closed and opened  (
52
).
PbyP / PinP SWAP: Swaps the picture on the right with one on  the left in the PbyP mode. Swaps the primary picture and the 
secondary picture in the PinP mode. (
 53
)
PinP POSITION : Toggles the PinP position.
INFORMATION: Displays SYSTEM_INFORMATION,   INPUT_INFORMATION  (
99
), WIRELESS INFORMATION, 
WIRED INFORMATION or nothing.
MY MEMORY : Loads one of adjustment data stored  (
65
). 
When more than one data are saved, the adjustment   
changes every time the  MY BUTTON is pressed.
When no data is saved in memory, the 
dialog "No saved data" appears.
When the current adjustment is not 
saved to memory, the dialog as shown in 
the right appears.
If you want to keep the current adjustment, please press   
the ► button to exit. Otherwise loading a data will overwrite the 
current adjusted condition.
ACTIVE IRIS : Changes the active iris mode  (
62
).
PICTURE MODE: Changes the PICTURE MODE (
 63
).
FILTER RESET : Displays the filter time reset confirmation dialogue 
(
 76
).
TEMPLATE: Makes the template pattern selected to the TEMPLATE  item (
 85
) appear or disappear.
MUTE: Turns the audio mute on/off.
RESOLUTION: Turns on/off the RESOLUTION dialog (
 72
).
ECO MODE: Changes the ECO MODE dialog  (
75
).
(continued on next page) 
						

							90
OPTION menu
ItemDescription
MY BUTTON (continued)
ACCENTUALIZER: Turns on/off the ACCENTUALIZER dialog  ( 65
).
HDCR: Turns on/off the HDCR dialog ( 65
).
STATUS MONITOR: Turns on/off the back light of status monitor  (
 31
). This function is unavailable when SAVING is selected in 
STANDBY MODE while the projector is in the standby mode.
SCHEDULE
■ How to setup the item
1. Use the ▲/▼/◄/► cursor buttons to select or adjust.
2. Select OK to finish the settings.
(continued on next page)
■ How to activate (DATE AND TIME / SPECIFIC DATE)
Place a check mark in the box.
Check mark 
in the box
Date and first 
setup info could 
be seen with the 
check mark.
Item Description
DATE & TIME Set the DATE(Year/Month/Date) and Time(24-
hour scale).
SPECIFIC DATE 
Set specific date from 1 to 10.
PROGRAM EDIT The TIME and EVENT for Program 1 to 16 
can be editted.
 Please refer to the actual on-screen display(OSD) for 
appropriate operation.NOTE
1/2 page (Set the DATE(Year/Month/Date) and Time(24-hour scale).)