Hitachi Cp-X308 Projector Users Manual

5

OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY(continued)
4. Using the Transition Detector Function
While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.• Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.• Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.• Keystone adjustment feature has been prohibited as...

5

OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY(continued)
4.2-4  Move  the  cursor  to  the  right  side  of  the PA S S W O R D   A G A I N   b o x   a n d   p r e s s   t h e ►  button  to  display  the  PASSWORD  for about  20  seconds,  please  make  note  of  the PASSWORD during this time.Pressing the ENTER button will return to the TRANSITION DETECTOR on/off menu.• Please do not forget your Transition Detector PASSWORD.
4.3 Setting the Transition Detector off
4.3-1  Follow...

53

The MIU (Multi Information processing Unit) is a function to 
support the Network features and PC-LESS Presentation.
Remember that incorrect network settings on this projector 
may cause trouble on the network. Be sure to consult with 
your network administrator before connecting to an existing 
access point on your network.
Select “MIU” from the main menu to access the following 
functions. 
Select an item using the ▲/▼ cursor buttons on the projector or remote control, 
and press the ► cursor...

54

MIU menu
MIU menu (continued)
ItemDescription
LIVE MODE SETTING(continued)
QUIT PRESENTER MODE
The Presenter Mode that is set in the Live Viewer 3 software installed into your PC can be turned to off.A message, QUIT PRESENTER MODE, will be displayed in about 3 seconds when the function is performed. The function is available only when the Presenter Mode is set to on in the Live Viewer 3 software. The current setting of the Presenter Mode is shown in the menu.• The Presenter mode is a function that...

55

MIU menu
MIU menu (continued)
ItemDescription
LIVE MODE SETTING(continued)
DISPLAY USER NAME
Selecting this item displays the Display User Name defined in the Live View3 software in the PC whose image is on screen.
SINGLE PC modeThe Display User Name will be shown in the DISPLAY USER NAME box.
ExamplesDisplay User name   Shown in the DISPLAY USER NAME boxPC_NAME0001               PC_NAME0001(remained as default)            Unnamed(blank space )                   (prohibited showing)...

56

MIU menu
MIU menu (continued)
ItemDescription
PC-LESS PRESENTATION(continued)
DIRECTORY
Use the ▲/▼ buttons to select an image or a folder, and press the ENTER button to display the image or turn into the THUMBNAIL.To open or close the folder, press the ►/◄ buttons.
DISPLAY SIZE
Use the ▲/▼ buttons to set the display size.
KEY CONFIG.
Use the ▲/▼ buttons to select key configuration from the 2 patterns.
REMOVE MEDIA
Use the ▲/▼ buttons to select a remove mode, and then the ENTER or ► button is...

57

MIUmenu
MIU menu (continued)
ItemDescription
SETUP(continued)
IP ADDRESS
Use the ▲/▼/◄/► buttons to enter the IP ADDRESS. This function can only be used when DHCP is set to OFF.
• The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on the same network.• The IP ADDRESS “0.0.0.0” is prohibited.
SUBNET MASK
Use the ▲/▼/◄/► buttons to enter the same SUBNET MASK used by your PC. This function can only be used when DHCP is set to...

58

MIU menu
MIU menu (continued)
ItemDescription
SETUP(continued)
MODE
Use the ▲/▼ buttons to select the mode of the network communication system. Select it according to the setting of your PC.
ADHOC ó INFRASTRUCTURE
CH
Use the ▲/▼ buttons to select the channel of the wireless LAN while using it. Select it according to the setting of your PC.The channels 1 to 11 are available.
• The available channels would be various depending on a country. In addition, wireless network card might be required due to...

59

MIU menu
MIU menu (continued)
ItemDescription
SETUP(continued)
SSID (continued)
(2)  
To change an already inserted character, press the ▲/▼ button to move the cursor to one of the first 2 lines, and use the ◄/► buttons to move the cursor on the character to be changed. After pressing the ENTER or INPUT button, the character is selected.  Then, follow the same procedure as described at the item (1) above
(3)   
To finish entering text, move the cursor to the SAVE 
on screen and press the ENTER or...

60

MIU menu
MIU menu (continued)
ItemDescription
PROJECTOR NAME(1)  
Use the▲/▼ buttons on the MIU menu to select the 
PROJECTOR NAME menu and press the ► button. The PROJECTOR NAME dialog will be displayed.
(2)   
The current PROJECTOR NAME 
will be displayed on the first 3 lines. If not yet written, the lines will be blank. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to erase 1 character at a time. Also if you move the cursor to...