Hitachi Cp-X308 Projector Users Manual

6

MIU menu
MIU menu (continued)
ItemDescription
e-SHOT 
Selecting this item displays the e-SHOT menu. Insert the SD memory card or USB memory into the projector before you use the e-SHOT function. (61) The application software “PJTransfer” is required to store image(s) into the projector.
Use the ▲/▼ buttons to select an item which is a still image by the e-SHOT ( e-SHOT (Still Image Transfer) Display of the User’s Manual - Network Guide) and the ► or ENTER button to display the image.
• The...

6

MIU menu
MIU menu (continued)
ItemDescription
INFORMATION
Selecting this item displays the MIU-INFORMATION- dialog for confirming the network settings.
• The PROJECTOR NAME is displayed.• Nothing (blank) is shown in the “PROJECTOR NAME” and “SSID” field until you setup those items. (58, 59, 60)• When the voltage level of the battery for the built in clock decreases, the set time may become incorrect even though accurate date and time are input. Replace the battery suitably.  (68)• MAC wireless...

63

C .C  . (Closed Caption) menu
The closed caption setting can be changed through C.C. 
menu in the advance menu. Please select the item that you 
will change using ▲/▼ cursor buttons.
• The C.C. (Closed Caption) is the function that displays a 
transcript or dialog of the audio portion of a video, files or 
other presentation or other relevant sounds. It is required to 
have NTSC format video source supporting C.C. feature to 
utilize this function.
C.C. (Closed Caption) menu
ItemDescription
DISPLAY...

64

Maintenance 
Maintenance
A lamp has finite product life. Using the lamp for long periods of time could cause 
the pictures darker or the color tone poor. Note that each lamp has a different 
lifetime, and some may burst or burn out soon after you start using them. 
Preparation of a new lamp and early replacement are recommended. To prepare 
a new lamp, contact to your dealer and tell the lamp type number.
Replacing the lamp
Type number : DT00841
1.Turn the projector off, and unplug the power cord....

65

Maintenance
Lamp warning
Replacing the lamp (continued)
 HIGH VOLTAGE  HIGH TEMPERATURE HIGH PRESSURE
►The projector uses a high-pressure mercury glass lamp. The 
lamp can break with a loud bang, or burn out, if jolted or scratched, handled 
while hot, or worn over time. Note that each lamp has a different lifetime, and 
some may burst or burn out soon after you start using them. In addition, when 
the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and 
for gas...

66

Maintenance
Please check and clean the air filter periodically. When the indicators or a 
message prompts you to clean the air filter, comply with it as soon as possible. 
Replace the air filter when it is damaged or too soiled. To prepare a new air filter, 
contact to your dealer and tell the air filter type number.
Cleaning and replacing the air filter
Type number : MU04951
1.Turn the projector off, and unplug the power cord. 
Allow the projector to sufficiently cool down.
2.Use a vacuum cleaner...

67

Maintenance
Cleaning and replacing the air filter (continued)
9.Turn the projector on and reset the filter time using the FILTER TIME item in 
the EASY MENU.
►Before taking care of the air filter, make sure the power switch 
is off and the power cable is not plugged in, then allow the projector to cool 
sufficiently. Taking care of the air filter in a high temperature state of the projector 
could cause an electric shock, a burn or malfunction to the projector.
►Use only the air filter of the...

68

Maintenance
Consumption of the battery makes the internal clock not to work correctly. When the internal clock 
is wrong or it has stopped, please replace the battery according to the following procedures.
Replacing the internal clock batter y
1.Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently.
2.After making sure that the projector has cooled adequately, pull the SD card slot cover forward, pushing slightly its edge up, and remove it from the projector....

69

Maintenance
Other care
In order to ensure the safe use of your projector, please have it cleaned and 
inspected by your dealer about once every year.
1.Turn the projector off, and unplug the power cord. Allow the projector to cool 
sufficiently.
2.After making sure that the projector is cool adequately, lightly wipe the lens 
with a commercially available lens-cleaning wipe. Do not touch the lens 
directly with your hand.
If the lens is flawed, soiled or fogged, it could cause deterioration of...

70

Troubleshooting
Troubleshooting
If an abnormal operation should occur, stop using the projector immediately.
Otherwise if a problem occurs with the projector, the following checks and 
measures are recommended before requesting repair. 
If this does not resolve the problem, please contact your dealer or service 
company. They will tell you what warranty condition is applied.
►Never use the projector if abnormal operations such as 
smoke, strange odor, excessive sound, damaged casing or elements or...