Hitachi Cp-X308 Projector Users Manual

4

SCREEN menu
SCREEN menu (continued)
ItemDescription
MESSAGE
Using the ▲/▼ buttons turns on/off the message function.
TURN ON ó TURN OFF
When the TURN ON is selected, the following message function works.“AUTO IN PROGRESS” while automatically adjusting“NO INPUT IS DETECTED”“SYNC IS OUT OF RANGE”“Searching…” while searching for the input“Detecting…” while an input signal is detectedThe indication of the input signal displayed by changing The indication of the aspect ratio displayed by changingThe...

4

OPTION menu
OPTION menu
From the OPTION menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item, 
except for the items LAMP TIME and FILTER TIME. Then 
perform it according to the following table.
ItemDescription
AUTO SEARCH
Using the ▲/▼ buttons turns on/off the automatic signal search function.
TURN ON ó TURN OFF
When the TURN ON is selected, detecting no signal automatically cycles...

43

OPTION menu
OPTION menu (continued)
ItemDescription
AUTO OFF
Using the ▲/▼ buttons adjusts the time to count down to automatically turn the projector off.
Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.When the time is set to 1 to 99, and when the passed time with no-signal or an unsuitable signal reaches at the set time, the projector lamp will be turned off. If one of the projector's buttons or the remote...

44

OPTION menu
OPTION menu (continued)
ItemDescription
MY BUTTON
This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (6).Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.• COMPUTER2: Sets port to COMPUTER IN2.• MIU: Sets port to MIU.• COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)• S-VIDEO: Sets port to S-VIDEO.•...

45

OPTION menu
OPTION menu (continued)
ItemDescription
SERVICE(continued)
FAN SPEEDUsing the ▲/▼ buttons the rotation speed of the cooling fans.  The  HIGH  is  the  mode  for  use  at  highlands  etc. Note  that  the  projector  is  noisier  when  the  HIGH  is selected.
HIGH ó NORMAL
AUTO ADJUST
Using the ▲/▼ buttons to select one of the mode. When the DISABLE is selected, the automatic adjustment feature is disabled.
FINE ó FAST ó DISABLE      
FINE: Finer tuning including H.SIZE adjustment.
FAST:...

46

OPTION menu
OPTION menu (continued)
ItemDescription
SERVICE(continued)
KEY LOCK
Using  the  ▲/▼  buttons  turns  on/off  the  key  lock  feature.  When TURN  ON  is  selected,  the  buttons  on  the  projector  except  the STANDBY/ON button are locked.
TURN ON ó TURN OFF
• Please use to avoid a mischief and touching accidentally. This function does not have any effect on the remote control.
REMOTE FREQ.
Use the ▲/▼ button to change the projector's remote sensor setting.
1:NORMAL ó 2:HIGH
Items...

47

OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY
This projector is equipped with security functions.
User registration is required before using the security functions.
Please contact your local dealer.
1. Using Security Features
1.1 Inputting the PASSWORD
1.1-1  Use the ▲/▼ buttons on the OPTION menu to select SECURITY and press the ► button. The ENTER PASSWORD box will be displayed. The factory default PASSWORD is 8471. This PASSWORD can be changed (1.2 Changing the PASSWORD  (below))....

48

OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY(continued)
1.3 If you have forgotten your PASSWORD
1.3-1  Follow the procedure in 1.1-1 to display the ENTER PASSWORD box.
1.3-2   While the ENTER PASSWORD box is 
displayed, press and hold the RESET button for about 3 seconds or press and hold the INPUT and ► buttons on the projector for about 3 seconds.The 10-digit Inquiring Code will be displayed.• If there is no key input for about 55 seconds while the Inquiring Code is displayed the...

49

OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY(continued)
2.2-4  Move the cursor to the right side of the PASSWORD AGAIN box and press the ► button to display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. Pressing the ENTER button will return to MyScreen PASSWORD on/off menu.When a PASSWORD is set for MyScreen:
• The MyScreen registration function (and menu) will be unavailable.
• The MyScreen Lock menu will be unavailable.
• The START UP setting...

50

OPTION menu
OPTION menu (continued)
ItemDescription
SECURITY(continued)
3.1-2  Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed. 
3.1-3     Input a 4 part PIN Code using the ▲, ▼, 
◄, ►, COMPUTER and INPUT buttons.A PIN Code again box will appear. Reenter the same PIN Code. This will complete the PIN Code registration.
• If there is no key input for about 55 seconds while the PIN BOX or the PIN Code again box are displayed the menu will close. If...