Hitachi Cp-X308 Projector Users Manual

3

IMAGE menu
IMAGE menu (continued)
ItemDescription
H POSITION
Using the ▲/▼ buttons adjusts the horizontal position.
Left ó Right
• Over-adjusting the horizontal position may cause noise to appear on the screen. If this occurs please reset the horizontal position to the default setting.  Pressing RESET button when H POSITION is selected will reset H POSITION to the default setting.• When this function is performed on a video signal, s-video signal, or component video signal, of 525i (480i) or...

3

INPUT menu
INPUT menu
From the INPUT menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to execute 
the item. Then perform it according to the following 
table.
ItemDescription
PROGRESSIVE
Using the ▲/▼ buttons switches the progress mode.
TV ó FILM ó TURN OFF     
• This function is performed only for an interlaced signal at the VIDEO or S-VIDEO input, and for 525i (480i), 625i (576i) or 1125i...

33

INPUT menu
INPUT menu (continued)
ItemDescription
VIDEO FORMAT
The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ◄/► buttons to select the input port.
(2)  Using the ▲/▼ buttons switches the mode 
for video format.
AUTO  ó  NTSC  ó  PAL  ó  SECAM 
      N-PAL ó M-PAL ó NTSC4.43 
• This item is performed only for a video signal from VIDEO port or S-VIDEO port. • The AUTO mode automatically selects the optimum mode.• The AUTO operation may not work well for some signals. If the...

34

INPUT menu
INPUT menu (continued)
ItemDescription
RESOLUTION
The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and press the ► button.The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons. Selecting AUTO will set a resolution appropriate to the input signal.
(3) STANDARDPressing the ► or ENTER button when selecting a...

35

SETUP menu
SETUP menu
From the SETUP menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or the ENTER button to execute the 
item. Then perform it according to the following table.
ItemDescription
AUTO 
KEYSTONE EXECUTE
Selecting this item performs the automatic keystone distortion correction. Projector automatically corrects vertical keystone distortion due to the (forward/backward) setup angle by itself.
This function...

36

SETUP menu
SETUP menu (continued)
ItemDescription
WHISPER
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL ó WHISPER
• When WHISPER is selected, acoustic noise and screen brightness are reduced.
MIRROR
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL ó H:INVERT ó V:INVERT ó H&V:INVERT    
If the Transition Detector is TURN ON and MIRROR status is changed, Transition Detector Alarm (51) will be displayed when projector is restarted after the power switch is turned off....

37

SETUP menu
SETUP menu (continued)
ItemDescription
AUDIO
Allocates the audio ports.
(1)   Choose a picture input port using the 
▲/▼ buttons.
    QUIT ó COMPUTER (IN)1 ó COMPUTER (IN)2
VIDEO ó S-VIDEO ó COMPONENT ó MIU
(2)  Select the audio port to be interlocked with the input port using the ◄/► buttons.
[COMPUTER1, COMPUTER2, COMPONENT, S-VIDEO, VIDEO]
1 ó 2 ó 3 ó 
[MIU]
1 ó 2 ó 3 ó  ó H
• “M” is abbreviations of MIU.• M can be selected for MIU port only. When M is selected, the audio signal to MIU...

38

SCREEN menu
SCREEN menu
From the SCREEN menu, items shown in the table below 
can be performed.
Select an item using the ▲/▼ cursor buttons, and press 
the ► cursor button or ENTER button to execute the item. 
Then perform it according to the following table.
ItemDescription
LANGUAGE
Using the ▲/▼ buttons switches the OSD (On Screen Display) language.
�TÜRKÇE�POLSKI�SUOMI�
ENGLISH � FRANÇAIS � DEUTSCH � ESPAÑOL � ITALIANO�NORSK�NEDERLANDS�PORTUGUÊS�РУССКИЙ � SVENSKA � ¿—µ � 4P¨
[ � 1T
[ �...

39

SCREEN menu
SCREEN menu (continued)
ItemDescription
START UP
Using the ▲/▼ buttons switches the mode for the start-up screen.The start-up screen is a screen displayed when no signal or an unsuitable signal is detected.
MyScreen ó ORIGINAL ó TURN OFF          
Feature
MyScreenScreen can be registered by the MyScreen item (40).
ORIGINALScreen preset as the standard screen.
TURN OFFPlain black screen.
• To avoid remaining as an afterimage, the MyScreen or ORIGINAL screen will change to the BLANK...

40

SCREEN menu
SCREEN menu (continued)
ItemDescription
MyScreen
This item allows you to capture an image for use as a MyScreen image which can be used as the BLANK screen and START UP screen. Display the image you want to capture before executing the following procedure.
1.  Selecting this item displays a dialog 
titled “MyScreen”. It will ask you if you start capturing an image from the current screen.Please wait for the target image to be displayed, and press the ENTER button when the image is...