GTE Omni Si Database Technical Practices Manual

CPG ERROR
MESSAGES
TT-62l-l -01. . .Tl-02
Tl-02Tl-02
Tl-03
Tl-03Tl-03
Tl -04
Tl-04SVR 5210TL-130400-1001
Table 21.1
CPG Error Messages (Continued)
TITLEESP CAN BE 
‘Y’FOR ONLY ONE
PORT
.~.SECOND
ELEMENT LESS
l-HEN FIRST
ELEMENT
ELEMENT 2 IS
MEANINGLESS
SPECIFICATION
2ND FEATURE
REQUIRED IF
FIRST
SPECIFIED
ELEMENT HAVE
NCOMPATIBLE
dALUESELEMENT 2 IS
MEANINGLESS
SPECIFICATION
ELEMENTS
HAVE
INCOMPATIBLE
VALUES
2ND FEATURE
REQUIRED IF
FIRST
SPECIFIED
ELEMENT 2 IS
MEANINGLESS
SPECIFICATIONDESCRIPTION OF...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
Tl-04
. . .2ND FEATURETRUNK APPLICATION 
- TRUNK DIRECTION - ACD
REQUIRED IF
TRUNK PILOT NUMBER
FIRST
ACD TRUNK PILOT NUMBER CAN BE USED WITH ANY
SPECIFIEDTRUNK APPLICATION IF THE TRUNK DIRECTION IS
INCOMING OR TWO-WAY.
THE FOLLOWING IS A LIST OF REQUIREMENTS:
TRUNK ACD
TRUNK
APPLICATIONDIRECTION PILOT NUMBER
CAS,CLR,COT,FXT, IN,TW0000-9999TIE OR WTS
DIC,PAG,REC,NIC --
CAS,CLR,COT,OG,TW ::::
FXT,TIE,OR...

TL-130400-1001Table 21.1CPG Error Messages (Continued)PG ERROR
IESSAGESTITLEDESCRIPTION OF MESSAGES
Tl-082ND FEATUREBILLING MODE 
- TRUNK OUTGOING SIGNAL (MF)
REQUIRED IFMF SIGNALING APPLIES ONLY TO 
CAMA BILLING
‘- FIRST
MODE.
-..SPECIFIEDTHUS, IF THE BILLING MODE IS SPECIFIED AS ‘CM’,
THEN THE MF OUTGOING SIGNAL FIELD MUST BE ‘Y’.
THE MF OUTGOING SIGNAL FIELD FOR ALL OTHER
,.BILLING MODE SPECIFICATIONS MUST BE DASHED.
Tl-09ELEMENTS
HAVE
INCOMPATIBLE
VALUES
Tl-09ELEMENT 2 IS
MEANINGLESS
SPECIFICATION...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
Tl-112ND FEATURE
TRUNK DIRECTION 
-REQUIRED IF
DISPLAYABLE CLASS OF SERVICE,
FIRSTN-DISPLAYABLE CLASS OF SERVICE
SPECIFIEDCLASS OF SERVICE MUST BE DASHES FOR TRUNK
. . .DIRECTION OF ‘OG’.
Tl-12 _ELEMENT 2 IS
MEANINGLESS
SPECIFICATION
Tl-12ELEMENTS
HAVE
INCOMPATIBLE
VALUES
Tl-122ND FEATURE
TRUNK DIRECTION-TRUNK INCOMING SIGNAL-REQUIRED IF
TRUNK OUTGOING SIGNAL
FIRST
SPECIFIEDIF THE TRUNK DIRECTION IS...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
Tl-142ND FEATURE
TRUNK APPLICATION 
- DISCONNECT SUPERVISION
REQUIRED IF
IF THE TRUNK APPLICATION IS ‘TIE’,
F.!!RSTTHEN DISCONNECT SUPERVISION MUST BE ‘BT’.
SPECIFIED
. . .
Tl-16DASHES MUSTTIE TRUNK CALLING NUMBER
BE USED
DASHES MUST BE USED CONSISTENTLY.
CONSISTENTLY
IN FIELD
Tl-17
DASHES MUSTACD PILOT NUMBER
BE USEDDASHES MUST BE USED CONSISTENTLY.
CONSISTENTLY
IN FIELD
Tl-20
ILLEGAL VALUE TRUNK...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
Tl-212ND FEATURE
REQUIRED IF
FIRST
SPECIFIED
Tl-21RECORDER
TRUNK APPLICATION 
- R/A RETURN ANSWER BACK
ANNOUNCERTHE R/A RETURN ANSWER BACK FIELD CAN BE
NOT ALLOWEDSPECIFIED (‘Y’) ONLY IF THE TRUNK APPLICATION IS
FOR TRUNK
‘REC.APPLICATION
Tl-22Tl-23MF CAMA ONLYCAS TRUNK APPLICATION - TRUNK OUTGOING
IS NOTSIGNAL
ALLOWED FOR
FOR TRUNK APPLICATION, ‘CAS’, OUTGOING SIGNAL
TRK APPL CASMF 
(CAMA ONLY) IS NOT...

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESINCOMPATIBLE
THEN THE TRUNK DIRECTION MUST BE
MEANINGLESS
OING TRUNK GROUP FRL TO ACCESS IS
HEN THE TRUNK DIRECTION MUST BE
MEANINGLESS
INCOMPATIBLE
BER MUST BE UNIQUE
DD RECORD.LASSES OF SERVICE SELECTED
ROUP MUST BE INITIALIZED BY A
THE N-DISPLAYABLE CLASSES OF SERVICE
SELECTED FOR EACH TRUNK GROUP MUST BE
INITIALIZED BY AN NC RECORD.
REQUIREMENT PATTERNS OF
-DISPLAYABLE CLASSES OF
SERVICE FEATURESSEE APPENDIX 1.
UIT SHOULD...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLE
DESCRIPTION OF MESSAGES
Tl-57
Tl-59Tl-60INVALIDALTERNATE TRUNK GROUP
ALTERNATE
THE ALTERNATE TRUNK GROUP MUST BE DEFINED
TRUNK GROUPAS A TRUNK GROUP ON A 
Tl AND T2 RECORD.i(ENDCHK)
PILOT NO.IN ORDER FOR THE ACD FEATURE TO WORK
BELONGS TOPROPERLY, IT IS MORE DESIRABLE TO USE A PILOT
TERMINAL
NUMBER FROM A CIRCULAR HUNT GROUP.
HUNT GRP 
‘o(GENTRK)
INVALID PILOTTHE ACD PILOT NUMBER SHOULD BE A VALID PILOT
NUMBER
NUMBER ON AN HG...

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESSERVICE NOT
ANINCOMING TRUNK GROUP
ISRESTRICTEDFROM
HAVING CERTAIN FEATURES.
THE FOLLOWING ARE THE ONLY FEATURES ALLOWED
FOR TRUNK GROUPS WITH AN APPLICATION TYPE OF
‘COT’ OR ‘FXT’:
1. ATTENDANT INFORMATION (‘Al’)
2. DATA LINE SECURITY 
(‘OS’)3. UNIVERSAL NIGHT ANSWER (‘UN’)
4. COMPUTER ACCESS (‘CA’)
THE FOLLOWING ARE THE ONLY FEATURES ALLOWED
FOR ‘WTS’ TRUNK APPLICATION TRUNK GROUPS:
1. DATA LINE SECURITY 
(IDS’)ALLOWED FOR...

TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
THEN THE ASSOCIATED N-DISPLAYABLE CLASS OF
SERVICE MUST NOT BE MARKEDFOR SPEED
FOUND ON A 
Tl RECORD.
THE 
TRU’NK GROUP SPECIFIED AS THE IDENTIFIER
MUST BE DEFINED ON A 
TlRECORD.
BE ‘DIC’, ‘PAG’, ‘REC, OR ‘NIC’ FOR THE TRUNK
GROUP SPECIFIEDFOR VMS ANDMDUDIRECTORY
ON RECORD
FRL TO ACCESS MUST THEREFORE BE SPECIFIED
FOR EVERY OUTGOING OR TWO-WAY TRUNK GROUP
ON RECORD CODE Tl.
Tl-72INCONSISTENTFRLS HAVE BEEN SPECIFIED FOR SOME...