GTE Omni Si Database Technical Practices Manual

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESCHECK TO MAKE SURE TWO JOBS WITH THE SAME
HAS INVALIDIT WILL NOT BE CHECKED FOR ERRORS.
RECORDCODE
CORRESPOND TO THE FORM SEQUENCE NUMBER.
NUMBER 
- IT
CHECK THE 
INREC NAME FOR CORRECTNESS.
CHECK THE LIB PARAMETER IN THE JCL TO MAKE
SURE THECORRECT 
PANVALET LIBRARYISBEING
BE USEDDASHES MUST BE CONSISTENT FOR EACH FUNCTION
CONSISTENTLY SECURITY CODE.
IN FIELD
MK-51MASTER KEDUTHE MASTER KEDU NUMBER SPECIFIED MUST BE A
NUMBER...

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESPREFIX INDEX
PREFIX INDEX
NOT FOUND ONREFIX INDEX IS SPECIFIED ON AN MO RECORD,
IT SHOULD BE SPECIFIED ON A PC RECORD
ELEMENT TOO
ON-NET MERS CODESMUST BENUMBEREDFROM
CHARACTER
ALLOWABLE VALUESFOR ANON-NET CODEARE
ALL MR RECORDS.
CONSOLIDATE THE NPAS USING THE LIKENPA.
ROUTING. ONE OF THESE TABLES IS USED FOR 
3-DIGIT NPA TRANSLATION, SO THE REMAINING THREE
TABLES MAY BE USED FOR 6-DIGIT TRANSLATION
CONTAINING CONFLICT CODES....

-:CPG 
ERRQRMESSAGES
MR-53
MR-55
. . . .
MR-56
MR-57
MS-01
MS-50
MS-51
MS-51NA-53
NA-54
SVR 5210
Table 21.1TITLE
IUPLICATE NPA
ZODE
blERS NPA NOT
PREVIOUSLY
DEFINED
.
VALUES MUST
BECONTINUOUS
FIELD DOES
NOT HAVE
REQUIRED
VALUE
VALUES TO BE
FILLED LEFT TO
RIGHT
MDR WORK
GROUP 
& SCC
ID NUMBER
DUPLICATED
MAXIMUM
NUMBER OF
UNIQUE
AUTHORIZATION CODES
EXCEEDED
MDR WORK
GROUP NO NOT
FOUND ON LD
FORM
TRUNK GROUP
- HAS INVALID
N-DISP CLASS
OF SERVICE
MARK
DUPLICATE
TRUNK
NUMBERTL-130400-1001
CPG Error Messages...

TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
IN SPECIFIED
THE TRUNK GROUP ON A TC RECORD.
ST APPEAR IN A NAILED
N ANNA RECORD.
LISTED FORM
UNK NUMBER
NC-01ELEMENT 2 IS
MEANINGLESS
SPECIFICATION
NC-51DUPLICATE N-N-DISPLAYABLE CLASS OF SERVICE NUMBER MUST
DISPLAYABLE
BE UNIQUE ACROSS THE NC RECORDS. FOR
CLASS OFVIOLATION AND RESTRICTION PATTERNS BETWEEN
SERVICE DATA
DISPLAYABLE AND N-DISPLAYABLE CLASSES OF
SERVICE, SEE APPENDIX 1.
D-4988187SVR 5210 

.TL-130400-1001Table 21.1
CPG Error Messages (Continued)THE STATION SILENT MONITOR ACCESS FIELD
ND RESTRICTION
PATTERNS
THAN FIRST
EQUAL FIRST
NR-02DASHES MUSTIN TIME PERIODS 1 TO 3, THE SENDING INSTRUCTION
BE USEDLIST NUMBER AND THE ROUTING LIST NUMBER MUST
CONSISTENTLY
BOTH BE DASHES OR BOTH CONTAIN VALID VALUES.
IN FIELD
NR-51CODE RANGETHE NPA CODE RANGE FIELDS CONTAIN A THREE
INCLUDESDIGIT CODE THAT IS NOT AN NPA CODE.
INVALID NPASPLIT THE NPA DATA INTO MULTIPLE NR RECORDS
TO AVOID THE INVALID NPA....

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESTED TIME PERIOD
ALL RECORDS
VEIDENTICAL VALUES FOR TIME
SELECT ORDER.
IT IS POSSIBLE TO HAVE ERRONEOUS VALUES IN THE
NUMBER OFROUTING LIST OR SENDING INSTRUCTIONS IF THEY
DONOT HAVE THESAMENUMBER OF SELECT
(RECORD CODESRP AND 
Tl) WITH ANOUTGOING
INDEX (RECORD CODES St, LP AND/ OR PC) THAT
SPECIFIES THE OUTPULSING OF 
DlGlTS ’ # ’ AND/OR
D-5008187SVR 5210 

. . .SVR 5210
8187D-501TL-130400-1001
Table 21.1CPG Error Messages (Continued)
>PG ERROR
MESSAGESTITLEDESCRIPTION OF MESSAGES
NT-012ND FEATURETRANSLATION TYPE
REQUIRED IFGIVEN A CERTAIN TRANSLATION TYPE, THE SELECT
FIRSTTRUNK GROUP, THE NUMBER OF 
DIGI TS
Sf%ClFlEDOUTPULSED, SENDING INSTRUCTION, AND ROUTING. . .LIST FIELDS MUST BE AS FOLLOWS:
TRANS-SELECT NO. OFSENDINGROUTING
LATIONTRUNK DIGITSINSTRLIST
TYPEOUTPULSED
LOC -- ---MRS -- 
---TGS00-63 
-_-DGT -- 
---ABC -- 
---
TGO00-631-15 --
MRN -- 
---MER...

TL-130400-1001
CPG ERROR
MESSAGES I
NT-52. . .NT-53
NT-54
NT-54
NT-55
NT-56
NT-57
NT-58
NT-59
NT-61NT-62
D-502
Table 21.1CPG Error Messages (Continued)TITLE
FIELD
CONFLICTS
WITH TRUNK
APPLICATION
TRUNK GROUP
NOT FOUND
DUPLICATE ABC
ENTRY
DUPLICATE
NPA/OFFICE/SE
RVICE CODE
MERS NPA OR
3N-NET CODE
NOT ON MR
FORMTIME PERIOD
DATAREQUIRED
TIME PERIOD
NOT FOUND
TIME PERIOD
VALUES MUST
MATCH ACROSS
ALL RECORDS
ROUTE
LIST/SEND
INSTR DO NOT
HAVE SAME
NUMBER OF
SELECT
ORDERS
ONLY 4 UNIQUE
NPAS ALLOWED
SENDING...

TL-130400-1004Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGES(RECORD CODES SI, LP AND/ ORPC) THAT
FIES THE OUTPULSING OF DIGITS ‘ # ’ AND/OR
SLOT, AND EQUIPMENT STATUS) FOR 
MUSIC-ON-INCOMPATIBLE
WITH INCOMING
CARD TYPE
oc-54FUNCTION OFPHYSICAL LOCATION
CARD NOTTHE PEC, GROUP, SLOT AND CIRCUIT FUNCTION
ALLOWED FORSPECIFIED MUST BE VALID FOR THE CARD TYPE
CARD TYPEDEFINED ON FR (FOR THIS PEC TYPE).
DEFINED ONTHE MUSIC ON HOLD CIRCUIT MUST APPEAR ON A
FORM FRPOTS OR OFFP LINE CARD....

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESPHYSICAL LOCATION
UP,SLOT AND CIRCUIT SPECIFIED FOR
C ON HOLD CIRCUIT MUST BE UNIQUE.
TS.OF THE TWO SLOTSIT FILLS,
THE RIGHT HAND ONE HAS ALREADY BEEN FILLED.
OVERSIZED CARD. THE RIGHT HALF OF THAT CARD
FILLS THIS SLOT.
INTO THIS SLOT
ARD FOR THE 
MU&C ON HOLD CIRCUIT WAS
NOT SPECIFIED ON AN FR RECORD
(PHYLOC)
OD-01VALUE OF
SECOND
ELEMENT TOO
LARGE
D-5048187SVR 5210