GTE Omni Si Database Technical Practices Manual

TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
FOR DESTINATION TYPE ‘SCC’, THE DESTINATION
TYPE IDENTIFIER MUST BE A VALID TRUNK GROUP
WITH AN APPLICATION TYPE OF ‘COT’, ‘FXT’, ‘TIE’, OR
INCOMPATIBLE
FIELD IS IN A RANGE OF ‘00’ TO 
‘03’,MARY DESTINATION FIELDS CANNOT
FIELD IS IN A RANGE OF ‘04’ TO 
‘07’,MARY DESTINATION FIELDS MUST BE
MEANINGLESS
SPECIFICATION
RT-02ELEMENTS
HAVE
INCOMPATIBLE
VALUES
RT-022ND FEATUREUSAGE FIELD 
- SECONDARY X.25 ROUTE
REQUIRED IFDESTINATION...

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESCHARACTER
SECONDARY X.25 ROUT
DASHES MUST BE USED
THE ENTIRE PHYSICAL L
(PEC, GROUP, CARD SLOT, AND CIRCUIT).
IF ANY OF THE FIELDS ARE DASHED,
THEN ALL MUST BE DASHED.
INCOMPATIBLE
DEFINED ON FR
INCOMPATIBLE
WITH INCOMING
TBEVALIDFOR THECARD TYPE
DEFINED ON FR
(FOR THIS PEC TYPE).
FOR USAGE 00 AND 01,
THE PRIMARY X.25 ROUTE DESTINATION MUST
APPEAR ON A VPLO, 
VPLl, VP20 (VOICE AND DATA OR
DATA), VP21 OR NIC CARD.
FOR USAGE 02,...

TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
THE PECGROUPSLOTAND CIRCUIT SPECIFIED
DEFINED ON AN
FRRECORD.
FR
X.1 21 ADDRESS
THE X.121 ADDRESS FOR THE ADMP MUST BE
ADDR MAY BELIMITED TO ONE. ADMP CAN ONLY HAVE ONE
RT-64MUST BEIF ADMP IS SPECIFIED FOR THE USAGE FIELD OF
DEFINED ONDATA SYSTEM ROUTING DATA, THEN AN ADMP CARD
RECORDCODEMUST BE DEFINED ON FR.
FR(ADMPCK)
ADMP NOTUSAGE FIELD-CARD TYPE
SPECIFIED ONIF THE CARD TYPE ADMP IS DEFINED ON RECORD
RTCODE FR THEN AN ADMP...

TL-130400-1001Table 21.1
CPG Error Messages (Continued).
DESCRIPTION 
OF MESSAGES CPG ERROR
MESSAGES
rSD-54
a-01
s-51
SI-52
9-52
w-53
SI-60
SI-61
i
D-51 8TITLE
CLASS OF
SERVICE NOT
DEFINED
.=.PRIMARY DIRECTORY NUMBER 
-THE PRIMARY DIRECTORY NUMBER MUST HAVE AN
N-DISPLAYABLE CLASS OF SERVICE WITH ‘SD’ (CAS
SECONDARY NUMBER) SPECIFIED.
(GENLIN)SD-51
. . .SD-51 
_DIRECTORY
NUMBER 
NO?FOUNDPRIMARY DIRECTORY NUMBER
THIS NUMBER MUST BE A VALID DIRECTORY
NUMBER APPEARING ON AN LD RECORD. (GENLIN)
REQUIRED
DATA...

TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
CODE OF AND MUST THEREFORE BE
D FOR EVERY MERS ROUTE ON RECORD
THE SYSTEM AND NOT OTHERS.
ENSURE THAT ALL ATTENDANTS, LINES, TRUNK
GROUPS, MERS ROUTES, ETC. HAVE FRLS ENTIRELY
ENABLED OR DISABLED.
BER MUST BE UNIQUE
THE DATA SYSTEM USER SECURITY LEVEL MUST BE
UNIQUE ACROSS ALL SL RECORDS.
VEL CAN ONLY
S DEFINED BY THE
SM-52REQUIREDSOURCE GROUP
VALUE NOTFOR EACH SOURCE GROUP APPEARING ON A TC
FOUND ONRECORD THERE SHOULD BE A...

TL-130400-1001
CPG ERROR
MESSAGESTable 21.1CPG Error Messages (Continued)TITLEDESCRIPTION OF MESSAGES
SR-01
. . .INVALID
CHARACTER
STRING
.i_SYMBOLIC REPLACEMENT WORD STRING
CHARACTERS
THE SYMBOLIC REPLACEMENT WORD/STRING
CHARACTER FIELDS ARE COMPOSED OF SYMBOLIC
REPLACEMENT WORD PLUS THE SYMBOLIC
REPLACEMENT STRING.
THE FIRST ‘N’ ASCII CHARACTERS BEFORE THE FIRST
BLANK CHARACTER WILL BE THE SR WORD. THE
NEXT ‘M’ ASCII CHARACTERS FOLLOWING THE FIRST
BLANK CHARACTER WILL BE THE SR STRING. ‘N’ +
‘M’ HAVE...

TL-130400-1001Table 21.1CPG Error Messages (Continued)
DESCRIPTION OF MESSAGESIST NUMBER AND THE ROUTING LIST
BOTH BE DASHED OR BOTH CONTAIN
NPA/OFFICE/SENOT DEFINED
BERS MUST BE
CONTINUOUS
TIVE WITH NO GAPS.
TIME PERIOD
VALUES MUSTSAME SENDING INSTRUCTION LIST NUMBER AND
NUMBER OF
IT IS POSSIBLE 
i0HAVE ERRONEOUS VALUES IN THE
NUMBER OFROUTING LIST OR SENDING INSTRUCTIONS IF THEY
DO NOT HAVE THE SAME NUMBER OF SELECT
SVR 52108187D-521 

TL-130400-1001Table 21.1CPG Error Messages (Continued)
SPG ERROR
MESSAGES
ST-60
. . .
SY-01SY-02
SY-03
SY-04
SY-05
SY-06
Sl-51Sl-52
Sl-53
D-522TITLE
#OR 
* BEING
OUTPULSED ON
NON-DTMF
TRUNK GROUP
BLANKSON .
INPUT RECORD
INVALID
CHARACTER
STRING
NUMERIC FIELD
CONTAINS
NON-NUMERIC
DATA
INVALID
CHARACTER
STRING OR
NUMERIC
VALUE
INVALID
CHARACTER
DUPLICATE
SCREENING
TABLES
MDR WORK
GROUP
NUMBER NOT
FOUND ON LD
FORM
MDR DEVICE
NOT ON MD
FORM
8187DESCRIPTION OF MESSAGES
A ROUTING LIST SENDING INSTRUCTION...

TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
INATION OF MDR DEVICE AND TRUNK
MBER MUST BE UNIQUE ACROSS ALL S2
A 
TlRECORD.
R MAY BE‘Y’MING OR TWO-WAY TRUNK
THE
OtiTGOiNGSCREENING THE OUTGOING
ELEMENT IS
BER MUST BE IN THE
ELEMENT ISRANGE 000 TO 103 ONLY.
TC-51TRUNK GROUPTRUNK GROUP NUMBER
NOT FOUNDTHIS NUMBER MUST BE A TRUNK GROUP DEFINED
ON A 
Tl RECORD.
TC-52TRUNK GROUPTHERE SHOULD BE AT LEAST ONE TRUNK CIRCUIT
DOES NOTON A TC RECORD FOR EACH TRUNK GROUP.
HAVE...

TL-130400-1001Table 21.1CPG Error Messages (Continued)DESCRIPTION OF MESSAGES
DEFINED ON FR
INCOMPATIBLE
OT, AND CIRCUIT FUNCTION
VALID FOR THE CARD TYPE
DEFINED ON FR (FOR THIS PEC TYPE).
PHYSICAL TRUNK TYPE OF ‘EM’ MUST APPEAR ON AN
‘EMT OR ‘EMT4 TRUNK CARD.
PHYSICAL TRUNK TYPE OF ‘GS’, ‘LP’, AND ‘LD’
(OUTGOING) MUST APPEAR ON A COT TRUNK CARD.
PHYSICAL TRUNK TYPE OF ‘LD’ (INCOMING) MUST
APPEAR ON AN ILT TRUNK CARD.
PAGING/DICTATION CIRCUITS (TRUNK APPLICATION
‘DIC’ OR ‘PAG’ MUST APPEAR ON A 
PDIC...