GTE Omni Scbs Installation And Maintenance Manual

Data Interface Unit
(DIU) Programming
DESCRIPTION
.PROVIDES STANDALONE DATA STATION CAPABILITY WITH TERMINAL, MODEM, OR PRINTER
. PROGRAMMABLE DIU FEATURES INCLUDE:- COS/COR
- DATA ATTRIBUTES
- TENANT GROUP
- DATA HUNT GROUP
- DATA HOT LINE
piiGEq
1.ASSIGN THE DIU AS A DATA STATION WITH CMC-220:
.EQUIPMENT NUMBER OF DATA STATION (PI)
.DIRECTORY NUMBER OF DATA STATION (P2)
@DATA TERMINAL TYPE (P3) - (4 = DIU)
.DIRECTORY NUMBER OF VOICE STATION (P4) 
- BLANK
2.ASSIGN COS/COR TO DIU DATA STATION WITH...

Qata Interface Unit (DIU)
Programmin(ContinPROCEDURE (Continued) .
3.ASSIGN DATA ATTRIBUTES OF DIU WITH CMC-222:
@DIRECTORY NUMBER OF DATA STATION (PI). DATA SPEED (P2)
0 SYNCHRONIZATION AND COMMUNICATION (P3)
. WORD STRUCTURE (P4)
l ,PARITY (P5)
8 ECHOPLEX (P6)
4. ASSIGN DATA ATTRIBUTES AND RS-232-C INTERFACE FOR DIU WITH
CMC-223:.
DIRECTORY NUMBER OF DATA DIU (Pl).
CALL CONTROL MODE (P2).
RS-232-C INTERFACE SIGNAL MODE 1 (P3)
0RS-232-C INTERFACE SIGNAL MODE 2 (P4)
5.ASSIGN DATA ATTRIBUTES, TENANT...

PROCEDURE (Continued)6.ASSIGN DIU DATA STATION TO HUNT GROUP WITH CMC-301:
ICMC = 301
Pl: 51P4: 1.STATION HUNTING GROUP NUMBER 
(Pl) - (51 - 60)P2: 1
l TERMINATING ORDER (P2)P3: 4700
.
DIRECTORY NUMBER OF DATA STATION (P3). HUNTING TYPE (P4)
1
7.ASSIGN DIU DATA STATIONS TO HOT LINE SERVICE WITH CMC-304:
eHOT LINE NUMBER (Pl) - (51 - 90)
.
ORIGINATING DATA STATION (DIRECTORY NUMBER) - (P2).
TERMINATING DATA STATION DN (DIRECTORY NUMBER) - (P3)
IData Interface Unit 
(DILJ)Programming (Continued)
5.88 

Data Interface Unit (DIU) Programming -
CMC Command Summary
CATEGORY. DATA STATION ASSIGNMENT
. DATA STATION 
COS/COR
ASSIGNMENT
e DATA STATION ATTRIBUTES
ASSIGNMENT (I)
@ DATA STATION’S ATTRIBUTES
ASSIGNMEMTS (II) AND RS-232-C
SIGNAL MODES
@ DATA STATION ATTRIBUTES
ASSIGNMENT (Ill)
@ DATA STATION HUNT GROUP
ASSIGNMENT
8 DATA STATION HOT LINE
ASSIGNMENTCMC TABLE
CMC-220
\
CMC-221
CMC-222
CMC-223
CMC-224
CMC-301
CMC-304
5.89
FUNCTION
INSTALLS OR REMOVES DIU AS DATA
STATION WITH ITS ASSOCIATED
DIRECTORY...

Programming Data Interface Unit (DIU)
Associated with CS-lO/CS-20.ALLOWS 
DIU ASSOCIATED WITH CS-10 OR CS-20 TO ESTABLlSH DATA CALLS AND PROVIDE SAME
OPERATION AS CSD WITH DATA TERMINAL ADAPTER (DTA).
1.ASSIGN CS-10 OR CS-20 AS VOICE STATION ASSOCIATED
WITH DIU WITH CMC-220:
@EQUIPMENT NUMBER OF DATA STATION (Pl).
DIRECTORY NUMBER OF DATA STATION (P2).
DATA TERMINAL TYPE (P3) - (2 = DIU AND CS-lO/CS-20)
0DIRECTORY NUMBER OF VOICE STATION (P4)
2.ASSIGN DATA CALL BUTTON TO CS-20 OR CS-20
ASSOCIATED WITH...

Programming Data Inrface Unit (DIU)
Associated with 
CSl
CATEGORY. DATA STATION ASSIGNMENT
@ EKT BUTTON ASSIGNMENT
CMC TABLE
CMC-220
CMC-203
5.91
FUNCTION
INSTALLS OR REMOVES DIU WITH
CS-20/C&20 AS VOICE/DATA STATION
WITH ITS ASSOCIATED DIRECTORY
NUMBERS
ASSIGNS DATA CALL BUTTON TO CS-10 OR
CS-20 TELEPHONE ASSOCIATED WITH DIU 

Programming Key
FeKEY TELEPHONE EKT BUTTON ARRANGEMENT
FORWARDSAVE/FORWARDSAVE/LINE 1CAMP ONALLREPEATICMLINE 1CAMP ONALLREPEATICM
DDD[IDnDDDDDO NOT
CALL
CALLSPEAKER-DISTURBANNOUNCESPEAKERTRANSFERHOLDANNOUNCEMUTEPHONETRANSFERHOLD
DDDDDDDanD
CS-10 BUTTON ASSIGNMENTS FOR TELEPHONES
CS-20 BUTTON ASSIGNMENTS FOR TELEPHONES
CONNECTED TO CARD SLOTS OTHER THAN 01CONNECTED TO CARD SLOTS OTHER THAN 01TRUNK
FORWARDSAVE/LINE 1(IN)ALLREPEAT
ICM
DDDDDDO NOT
CALL
DISTURBANNOUNCE
SPEAKERTRANSFERHOLD
DDIIDDTRUNK...

Laboratory Activity - Package
tasePART 1: ATTENDANT CONSOLEn (5.3)
1.TEST THE FOLLOWING ATTENDANT CONSOLE FEATURE BUTTONS (USING ATTENDANT CONSOLE USER’S GUIDE FOR
REFERENCE):
A. 
COS/CORB. TRUNK CAMP-ON
C. EKT STATION PAGING
D. MESSAGE LEAVING
E. ACCOUNT CODE ENTRY
2.USE CMC-231 TO PERFORM THE FOLLOWING TASKS:
A.IDENTIFY THE DEFAULT FEATURE ASSIGNED TO BUTTON 14 OF THE ATTENDANT CONSOLE.
B.REMOVE THE FEATURE FROM IBUTTON 14 AND ASSIGN THE FDC PROGRAM FEATURE (WHICH WILL BE USED FOR
HOTEL/MOTEL TASKS...

Laboratory Activity - Package C Data Base
Adminstation (5.3) (Continued)
PART 2: HOTEL/MOTEL
1.USE CMC-203 TO ASSIGN THE CSD TELEPHONE (EQUIPMENT NUMBER 000) AS THE FRONT DESK CONSOLE.d
2.USE CMC-204 TO SET FLAG WHICH WILL ASSIGN ALL LABORATORY ‘STATIONS (EXCEPT PREVIOUSLY DESIGNATED
CSDIFDC) AS GUEST ROOMS.
3.USE CMC-354 TO ASSIGN THE BLF/DSS MODULE (EQUIPMENT NUMBER 015) AS A ROOM STATUS INDICATOR MODULE.
4.USE CMC-355TO ASSIGN HOTEL/MOTEL ROOMS (STATION DIRECTORY NUMBERS) TO BUTTONS ON THE ROOM...

Laboratory Acti- PackageC
instrantinued)
9.USE CMC-352 TO ASSIGN THE FOLLOWING BILLING RATES FOR BILLING RATE NUMBER 1:
INITIAL TIME FOR TELEPHONE CALL (P2) = 20 SECONDS
INITIAL CHARGE FOR TELEPHONE CALL (P3) = 50 CENTS
ADDITIONAL TIME FOR TELEPHONE CALL (P4) = 60 SECONDS
ADDITIONAL CHARGE FOR TELEPHONE CALL (P5) = 30 CENTS
10.USE CMC-100 TO CREATE NEW ACCESS CODES FOR THE FOLLOWING HOTEL/MOTEL CODES:
FNO 73 
-GUEST ROOM CLEAN-UP
FNO 78 
-WAKE-UP REGISTRATION
FNO 79- WAKE-UP CANCELLATION
FNO 96 
-...