GTE Omni Scbs Installation And Maintenance Manual

Student Notes5.36 

f “,..
PACKAGE C
Data Communications Architecture
5.37 

Data Switching Internal and
External Interfaces
I
PABX
co
WATS
FX
DID/DISA
CENTREX
I
DATA
INTERF
WITH DATADATATERMINAL ADAPTER
TERl!.fllNALMODEM
5.38 

Package C Data Communications
Configuration
ASSOCIATED WITH DIU
DATADATADATADATADATADATA
TERMINALTERMINALTERMINALTERMINALTERMINALTERMINAL
.SUPPORTS SIX CSD TELEPHONES WITH DATA TERMINAL ADAPTERS AND TWO DATA INTERFACE
UNITS (OR TWO VOICE ONLY CSD TELEPHONES).
5.39 

5.40 

Review Exercise- Package C
Overview (5.1)
INSTRUCTIONS:THE FOLLOWING EXERCISE CONSISTS OF MULTIPLE CHOICE, TRUE/FALSE, FILL IN THE BLANK, OR
MATCHING TYPE QUESTIONS. ALL AVAILABLE RESOURCES (I.E., STUDENT WORKBOOK, NOTES, AND GTEP MANUAL) MAY
BE USED AS REFERENCES. SUBMIT EXERCISE TO INSTRUCTOR FOR GRADING WHEN LAST QUESTION HAS BEEN
COMPLETED.
1.
2.
3.
4.
5.
6.PACKAGE C EXPANDS THE SYSTEM TO INCLUDE THE FOLLOWING SYSTEM APPLICATIONS:
A.HOTEL/MOTEL, KEY SYSTEM FEATURES, AUTOMATIC CALL DISTRIBUTION, AND...

7.(TRUE OR FALSE)THE DATA INTERFACE UNIT (DIU) CAN SERVE AS A STANDALONE UNIT FOR
INTERFACE WITH A MODEM OR PRINTER.
8.MATCH EACH OF THE FOLLOWING HOTEL/MOTEL FEATURES WITH ITS CORRECT DEFINITION:
DO NOT DISTURB
AUTOMATIC WAKE-UP WITH
PRINTERROOM STATUS
MESSAGE REGISTRATION
VACANT ROOM 
RESTRBCTIONA.
B.
C.
D.
E.RESTRICTS INCOMING AND/OR OUTGOING CALLS WHILE ROOM IS IN
VACANT STATUSALLOWS FRONT DESK CONSOLE EQUIPPED WITH 
BLF/DSS MODULE
TO DISPLAY INDICATION FOR VACANT, OCCUPIED, NEEDS CLEAN-UP,
DO NOT...

PACKAGE C
Installation
5.43 

GIVEN:e
0
0
GTE OMNI SBCS (PREVIOUSLY INSTALLED)
GTE 
OMNI SBCS PACKAGE C EQUIPMENT AND PERIPtiERALS
-CPMC, MEMC, 4CHT, SWB, SWE, AND PFE CARDS:
- ATTENDANT CONSOLE
- HOTEL/MOTEL PRINTER
-DATA INTERFACE UNIT (DIU)
GTE 
OMNB SBCS COURSE AND SITE DOCUMENTATIO
STANDARD 
ilNSTALLATlON TOOLS
REVIEW EXERCISE
QUIREDFOREXPANDED SYSTE
INSTALLATION
COMPLETE REVIEW EXERCISE
9.44 

Package C Card InstallationYBASIC CABINET
POWERSUPPLY
YEXPANSION CABINET
1.GROUND YOURSELF PRIOR TO HANDLING CARDS.
2.SINCE SYSTEM POWER MUST BE TURNED OFF WHEN INSTALLING OR REPLACING CPMC OR MEMC CARDS, OFFICE
DEPENDENT DATA BASE WILL BE DELETED AND CUSTOMIZED DATA BASE MUST BE REPROGRAMMED.
3.IF POWER FAIL TRANSFER IS REQUIRED IT WILL BE NECESSARY TO INSTALL A 6PFE CARD IN SLOT 22 OF THE
EXPANSION CABINET USING THE CORRECT TOGGLE OPTION. CROSS CONNECT THE APPROPRIATE CONTROL LEADS
BETWEEN THE BASIC...