GTE Omni Scbs Installation And Maintenance Manual

OMNI SBCS Development PhasesGTE OMN\ SK’STHE 
OMNI SBCS IS BEING DEVELOPED IN PHASES CORRESPONDING TO SYSTEM VERSION RELEASES. THIS MODULE WILL
ADDRESS THE INSTALLATION, DATA BASE ADMINISTRATION, AND MAINTENANCE TASKS ASSOCIATED WITH PACKAGE C
(SVR 2.0.X.X). HIGHLIGHTS OF EACH DEVELOPMENT PHASE ARE DESCRIBED BELOW:
PACKAGES A/SVR 1.0.X.XAND 
B/SVR 1.5.X.X-
PACKAGE C/SVR 2.0.X.X-
PACKAGE D/SVR 3.0.X.X(FUTURE)-PROVIDE ADVANCED HYBRID SYSTEM FOR BUSINESS USE. INTRODUCE BASIC
INTERNAL DATA COMMUNICATIONS...

Student Notes
5.6 

System with Package C Interfaces
BEHIND
PABX OR CENTREX
63--FLOPPY DISKETTE DRIVESTATION
2MESSAGETERMINAL
DETAILDEVICE
RECORDING
PORTABLE
MAINTENANCE
PANEL
.INTERFACETERMINAL
UNITDEVICE
DID/DISAATTENDANT
CONSOLE
5.7 

Package C/Summary of
Features and Enhancements
SYSTEM FEATURES:
DIRECT INWARD-DIALING (DID)ALLOWS INCOMING CALLS ON DID TRUNKS (USING PTTL OR 2TTE TRUNK CARDS) TO
BYPASS THE ATTENDANT CONSOLE AND RING DIRECTLY TO A STATION.
i DIRECT INWARD SYSTEM-ACCESS (DISA)ALLOWS DIRECT ACCESS TO STATIONS, TRUNKS (e.g., WATS AND TIE), AND FEA-TURES FROM ANY REMOTE DTMF TELEPHONE.
ATTENDANT CONSOLE
-ALLOWS A FULL RANGE OF ATTENDANT SERVICES SUCH AS SINGLE-BUTTON ACCESS
TO CALL PROCESSING AND SYSTEM/STATION FEATURES.
-...

,-- ,,.,..l\THE FOLLOWING LISTED FEATURES MAY BE ASSIGNED TO FEATURE BUTTONS ON ATTENDANT CONSOLE:
ACCOUNT CODE/CLIENT
BILLING
-ALLOWS THE ATTENDANT TO INPUT AN ACCOUNT/CLIENT CODE OF UP TO 15 DIGITS
WHICH WILL BE RECORDED ON STATION MESSAGE DETAIL RECORDING. IF
ACTIVATED DURING A CONVERSATION, THERE IS NO INTERRUPTION TO CALLING
PARTY.ALARM
-ACTIVATED BY AN ALARM IN THE SYSTEM, THE LED LOCATED ABOVE THIS FEATURE
BUTTON wliL ALERT THE ATTENDANT TO A FAULT lN THE SYSTEM.
AUTOMATIC INTERCOM
-PROVIDES...

Attendant Console Package/Programmable
Features and Functions (Continued)GUE OMNU SK3DO NOT DISTURB OVERRIDE
-ALLOWS A STATION IN DO NOT DISTURB MODE TO BE OVERRIDDEN SO STATION WILL
RING.
EXTERNAL PAGING
-AUTOMATICALLY DIALS THE EXTERNAL PAGING CODE. ALLOWS ATTENDANT TO DIAL
THE APPROPRIATE ZONE NUMBER.
FLASH/NEW CALL
-ALLOWS ATTENDANT TO DEPRESS BUTTON DURING ACCESS TO OR CONVERSATION
ON A TRUNK TO DISCONNECT THE CALL IN PROGRESS AND RESEIZE THE TRUNK.
FRONT DESK PROGRAM
-ALLOWS THE ATTENDANT CONSOLE...

Attendant Console Package/Programmable
Features and Functions (Continued)Gull ahuawl SBCS
POSITION BUSY- ACTlVATES POSITION BUSY FEATURE REQUIRED FOR SYSTEM PROGRAMMING MODE.
REMOVES THE ATTENDANT CONSOLE FROM ACTIVE STATUS SO CALLS CANNOT BE
ANSWERED OR ORIGINATED FROM THE ATTENDANT CONSOLE.
SAVE NUMBER AND
-AUTOMATICALLY REDIALS THE LAST NUMBER DIALED FROM THE KEY PAD ON THE
REPEAT LAST NUMBERATTENDANT CONSOLE.
STATION PAGING-ALLOWS ATTENDANT TO DEPRESS BUTTON TO DIAL THE STATION PAGING ACCESS
CODE....

Key System Features
THE FOLLOWING KEY SYSTEM FEATURES MAY BE ASSIGNED TO BUTTONS ON CS-10, CS-20, OR CSD TELEPHONES:
COMMON HOLDDSS LINE TERMINATIONS
DSS SPEED DIALINGFLASH/NEW CALL
DELAYED RINGING
IDLE LINE/RINGING LINE
PREFERENCE
POST/PRESELECTION
PRIME LINE PREFERENCE
PRIVACY/PRIVACY RELEASE
PROGRAMMING FROM
STATION
-ALLOWS ALL STATION USERS TO RETRIEVE A CALL ON HOLD BY USING A LINE
BUTTON ON THE TELEPHONE.
-ALLOWS A MAXIMUM OF 40 LINES TO TERMINATE TO BUTTONS IN A BLF/DSSMODULE. A LINE MAY HAVE 52...

Enhanced Data
Communication Capabilities
.NEW DATA INTERFACE UNIT (DIU)
PROVIDES INTERFACE BETWEEN DATA
TERMINALS AND SYSTEM BY SERVING AS STANDALONE UNIT (WITH MODEMS OR
PRINTERS) OR BY BEING PAIRED WITH CS-10 OR CS-20 INSTRUMENTS FOR
SIMULTANEOUS VOICE/DATA COMMUNICATIONS.@PACKAGE C PROVIDES FOLLOWING DATA SWITCHING CONNECTION FEATURES (IN
ADDITION TO BASIC DATA SWITCHING FUNCTIONS AVAILABLE WITH PACKAGE B):
-DATA CALL SET UP (INTERNAL OR EXTERNAL) WITH DATA INTERFACE UNIT
(DIU). AS STANDALONE UNIT...

THE FOLLOWING FEATURES ARE AVAILABLE WITH THE HOTEL/MOTEL FEATURE PACKAGE:
AUTOMATIC WAKE-UP WITH-PROVIDES AUTOMATIC WAKE-UP SERVICE WITH MUSIC OR SYSTEM TONES. SECOND
PRINTOUT
ATTEMPT WITH NO ANSWER OR BUSY IS REPORTED ON HOTEL/MOTEL PRINTER OR
ROOM STATUS INDICATOR (BLF/DSS MODULE).
CALL RESTRICTION
-ALLOWS FRONT DESK CONSOLE TO CHANGE OPERATION MODE FOR STATIONS IN A
PARTICULAR CLASS OF SERVICE/CLASS OF RESTRICTION. OPERATION MODE
CHANGES MAY INCLUDE TWO-WAY CALLING, ORIGINATING ONLY, TERMINATING...