GTE Omni Scbs Installation And Maintenance Manual

Programming Hotel/Motel Features -CMC Command Su
CATEGORY
. FRONT DESK CONSOLE PROGRAM BUTTON
ASSIGNMENT. CHANGE GUEST ROOM FLAG
. ROOM STATUS INDICATOR ASSIGNMENT
. ROOM STATUS INDICTOR LAMP ASSIGNMENT
. HOTEL/MOTEL PRINTER ASSIGNMENT
. HOTEL/MOTEL PRINT OUT MESSAGE ALLOCATION
. HOTEL/MOTEL PARAMETER ASSIGNMENT
. MESSAGE REGISTRATION TRUNK GROUP NUMBER
SCREENING ASSIGNMENT
. MESSAGE REGISTRATION OFFICE CODE
ASSIGNMENT. MESSAGE REGISTRATION BILLING RATE
ASSIGNMENT. SPECIAL SERVICE CODES/SERVICE CALL...

, .-,‘!,Student Notes
5.77 

Direct Inward System Access Standard
ISA-S) Proing1 DESCRIPTION 1
@FEATURE PROVIDES DIRECT ACCESS TO SYSTEM FEATURES FROM ANY REMOTE LOCATION.
@DISA-S IS ASSIGNED TO A GROUND START CO TRUNK AT A 4BWC PORT..
USERS OUTSIDE THE SYSTEM MAY ACCESS ASSIGNED DISA-S TRUNK VIA A DTMF TELEPHONE
AND THEN ENTERING AN ACCESS CODE..
USERS HAVE ACCESS TO THE FOLLOWING FEATURES:
- STATION CALL
- ATTENDANT CALL
-OUTGOING TRUNK LINES (CO, TIE, WATS, FX)
- LCR
- see
- SYSTEM SPEED DIALING
- EKT PAGING ACCESS
- EXTERNAL...

Direct Inward System Access
Programming (Continued)I- (Continued)
2.ASSIGN COS/COR TO DISA-S TRUNK WITH CMC-252:. TRUNK GROUP NUMBER (PI)
.
CLASS OF SERVICE DAY (P2) - (1 - 16).
CLASS OF SERVICE NIGHT (P3) - (1 - 16).
CLASS OF RESTRICTION DAY (P4) - (1 - 16).
CLASS OF RESTRICTION NIGHT (P5) - (1 - 16)
3.ASSIGN DISA-S AUTHORIZATION CODE WITH CMC-432:.AUTHORIZATION CODE 
(Pl) - (1 - 8 DIGITS OR BLANK)
CMC=252
Pl: 14P4:1
P2: 1P5:16
P3: 16
CMC= 432
Pl: 1234
5.79 

Direct Inward System Access -Standard Programming 
-
CATEGORYl DISA-S TRUNK ASSIGNMENT
0 DISA-S TRUNK COS/COR
ASSIGNMENTl DISA-S AUTHORIZATION CODE
ASSIGNMENTCMC TABLECMC-250
CMC-252
CMC-432
5.80
FUNCTIONASSIGNS DIRECT SYSTEM INWARD
ACCESS (STANDARD) TO A GROUNDSTART TRUNK
ASSIGNS TRUNK 
COSICOR TO DISA-STANDARD TRUNK
ASSIGNS THE AUTHORIZATION CODE FOR
THE DISA-STANDARD FEATURE 

5.81 

Direct Inward Dialing (DID)
ProgrammingGTE awM!l SLWS
f7iEGiq.
ALLOWS lNCOMlNG CALLS ON DID TRUNK TO BYPASS ATTENDANT CONSOLE AND DIRECTLY
RING STATION.
DID TRUNKS ARE TERMINATING-ONLY TRUNKS AND ARE ASSIGNED ONLY TO 2TTE OR 2TTL
PORTS.
pizGiiq
1.ASSIGN DID TRUNK WITH CMC-250:. EQUIPMENT NUMBER 
(Pl).TYPE OF TRUNK (P2) 
- (5 = DID E 81 M, 13 = DID LD)
.
TRUNK GROUP NUMBER (P3) - (57 - 62).
OPERATION MODE (P4) - (1 = INCOMING TRUNK).SIGNALING (P5) 
- (1 = GROUND OR E & M)
.
START MODE (P6) - (1 = WINK...

.- . . .Direct Inward Dialing (DID)
Programming (Continued)1
 PROCEDURE 1 (Continued)
3.ASSIGN RECEIVED DIGIT LENGTH AND PREFIX CODE TO DID TRUNKS WITH
CMC-430:.TRUNK GROUP NUMBER (PI) 
- (57 - 62)
*RECEIVED DIGIT LENGTH (P2) - (1 - 4 DIGITS).
PREFIX CODE (P3) - (1 - 4 DIGITS OR BLANK).
DISA DIRECTORY NUMBER (P4) - (BLANK).
DISA AUTHORIZATION CODE (P5) - (BLANK)
4.ASSIGN THE LISTED DIRECTORY NUMBERS TO A DID TRUNK WITH CMC-431:
@TRUNK GROUP NUMBER (3) - (57 - 62)
oLISTED DIRECTORY NUMBER (Pl) - (l-4...

Direct Inward Dialing/Direct Inward
System Access ProgrammingGE ai?hNU SBCS1
 DESCRIPTION. DIRECT INWARD SYSTEM ACCESS VIA DIRECT INWARD DIALING TRUNK 
(DIDIDISA) ALLOWS
OUTSIDE USERS ACCESS TO SYSTEM FEATURES VIA DID TRUNKS USING A DTMF TELEPHONE.. ACCESSIBLE 
DID/DISA FEATURES INCLUDE:
- STATION CALL
- ATTENDANT CALL
-OUTGOING TRUNK LINE CALL (CO, TIE, WATS, FX)
- LCR
- see
- SYSTEM SPEED DIALING
- EKT PAGING ACCESS
- EXTERNAL PAGING
1.ASSIGN DISA DIRECTORY NUMBER AND AUTHORIZATION CODE TO EXISTING
DID...

Direct Inward Dialing and DID/DISAProgramming CMC Command
CATEGORY. DID TRUNK ASSIGNMENT
0 DID TRUNK COWCOR ASSIGNMENT
* DID ADDITIONAL CODE ASSIGNMENT
OR 
DID/DISA DIRECTORY AND CODE
ASSIGNMENT
0 DID LISTED DIRECTORY NUMBER
. DID TRUNK LEVEL CHANGE
ASSIGNMENTCMC TABLEFUNCTION
CMC-250ASSIGNS DID SERVICE TO DID TRUNKS
CMC-252ASSIGNS TRUNK COS/COR TO DID TRUNKS
CMC-430ASSIGNS RECEIVED DIGITS LENGTH,
PREFIX CODE, DISA DIRECTORY NUMBER,AND 
DISA AUTHORIZATION CODE
FOR 
DID/DISA
CMC-431ASSIGNS LISTED...