Getnet Router GR-724W User Manual

74 
IP address (11):      server here 
 
RADIUS Server      Please input the port number of radius 
Port (12):    server here. 
 
RADIUS Server      Please input the port number of radius 
Password (13):      password here. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
After you finish WEP setting, please click ‘Apply’ button (10) and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to...

75 
 
2-7-3-3 Wi-Fi Protected Access (WPA): 
 
When you select this mode, the wireless router will use WPA encryption, 
and the following setup menu will be shown on your web browser: 
 
 
 
Here are descriptions of every setup items: 
 
WPA Unicast      Please select a type of WPA cipher suite. 
Cipher Suite (2):  Available options are: WPA (TKIP), WPA2 (AES), 
and WPA2 Mixed. You can select one of them, but 
you have to make sure your wireless client support 
the cipher you selected. 
Pre-shared...

76 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
 
 
 
 
 
2-7-3-4 WPA RADIUS: 
 
If you have a RADIUS server, this router can work with it and provide 
safer wireless authentication. 
 
 
 
Here are descriptions of every setup items: 
WPA Unicast      Please select a type of WPA cipher suite. 
Cipher Suite (2):  Available options are: WPA (TKIP), WPA2 (AES), 
and WPA2 Mixed. You can...

77 
After you finish with all settings, please click ‘Apply’ (6) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
 
2-7-4 Wireless Access Control 
 
This function will help you to prevent unauthorized users from 
connecting to your wireless...

78 
 
 
All allowed MAC addresses will be displayed in ‘MAC Address Filtering 
Table’ (1). Here are descriptions of every setup items: 
 
Delete Selected (2):   If you want to delete a specific MAC address entry, 
check the ‘select’ box of the MAC address you want 
to delete, then click ‘Delete Selected’ button. (You 
can select more than one MAC addresses). 
 
Delete All (3):    If you want to delete all MAC addresses listed here, 
please click ‘Delete All’ button. 
 
Enable      To enforce MAC address...

79 
    anything. You can input up to 16 alphanumerical   
characters here. This is optional and you can leave   
it blank, however, it’s recommended to use this field   
to write a comment for every MAC addresses as a   
memory aid. 
 
Add (7):    Click ‘Add’ button to add the MAC address and 
associated comment to the MAC address filtering 
table. 
 
Clear (8):    Click ‘Clear’ to remove the value you inputted in 
MAC address and comment field. 
 
After you finish with all settings, please click...

80 
2-7-5 Wi-Fi Protected Setup (WPS) 
 
Wi-Fi Protected Setup (WPS) is the simplest way to build connection 
between wireless network clients and this wireless router. You don’t have 
to select encryption mode and input a long encryption passphrase every 
time when you need to setup a wireless client, you only have to press a 
button on wireless client and this wireless router, and the WPS will do the 
rest for you. 
 
This wireless router supports two types of WPS: Push-Button 
Configuration (PBC), and...

81 
Here are descriptions of every setup items: 
 
Enable WPS (1):  Check this box to enable WPS function, uncheck it 
to disable WPS. 
 
WPS Information (2):WPS-related system information will be displayed 
here: 
 
WPS Status: If the wireless security (encryption) 
function of this wireless router is properly set, you’ll 
see ‘Configured’ message here. If wireless security 
function has not been set, you’ll see ‘unConfigured’. 
 
PinCode Self: This is the WPS PIN code of this 
wireless router. This...

82 
 
Configure      Click ‘Start PBC’ to start Push-Button style WPS 
by Push Button (4):  setup procedure. This wireless router will wait for 
WPS requests from wireless clients for 2 minutes. 
The ‘WLAN’ LED on the wireless router will be 
steady on for 2 minutes when this wireless router is 
waiting for incoming WPS request. 
 
Configure      Please input the PIN code of the wireless client you 
by client           wish to connect, and click ‘Start PIN’ button. 
PinCode (5):  The ‘WLAN’ LED on the...

83 
2-7-6 Security Tips for Wireless Network 
 
Here are some quick tips to help you improve the security level of your 
wireless network: 
 
1. Never use simple words (like school, apple and computer) as WEP 
encryption or WPA passphrase. 
 
2. A complicated (the combination of number, alphabet, even symbol, 
and long enough) WEP key and WPA passphrase is much safer than 
simple and short ones. Remember that the wireless client is capable to 
keep the key or passphrase for you, so you only have to input...