Getnet Router GR-724W User Manual

44 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-4 Setup procedure for ‘PPTP’: 
 
PPTP requires two kinds of setting: WAN interface setting (setup IP 
address) and PPTP setting (PPTP user name and...

45 
your Internet service provider if you don’t know what you should fill in 
these fields. 
 
Now please go to PPTP settings section: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):    Please input user ID (user name) assigned by your 
Internet service provider here. 
 
Password (2):    Please input the password assigned by your Internet 
service provider here. 
 
PPTP Gateway (3):   Please input the IP address of PPTP gateway 
assigned by your Internet service provider here....

46 
Connection       Please select the connection type of Internet 
type (7):    connection you wish to use, please refer to section 
2-5-3 for detailed descriptions. 
 
Idle Time Out (8):    Please input the idle time out of Internet connection 
you wish to use, and refer to section 2-5-3 for 
detailed descriptions. 
 
When you finish with all settings, please click ‘Apply’ (9) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous...

47 
 
Here are descriptions of every setup items: 
 
User ID (1):    Please input user ID (user name) assigned by your 
Internet service provider here. 
 
Password (2):    Please input the password assigned by your Internet 
service provider here. 
 
L2TP      Please input the IP address of PPTP gateway   
Gateway (3):    assigned by your Internet service provider here. 
 
MTU (4):    Please input the MTU value of your network connection 
here. If you don’t know, you can use default value. 
 
Connection...

48 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-6 Setup procedure for ‘Telstra Big Pond’: 
 
 
 
This setting only works when you’re using Telstra big pond’s network 
service in Australia. You need to input: 
 
User Name (1):     Please input the user name assigned by Telstra. 
 
Password (2):      Please input the password assigned by Telstra. 
 
Assign login          Check this box to choose login server by yourself. 
server...

49 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
2-5-7 Setup procedure for ‘DNS’: 
 
If you select ‘Dynamic IP’ o r  ‘PPPoE’ as Internet connection method, at 
least one DNS server’s IP address should...

50 
DNS Address (1):    Please input the IP address of DNS server provided 
by your service provider. 
 
Secondary        Please input the IP address of another DNS 
DNS Address (2):    server provided by your service provider, this is 
optional. 
 
 
 
 
 
 
After you finish with all settings, please click ‘Apply’ (3) button and the 
following message will be displayed on your web browser: 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click...

51 
using at a certain time. 
 
This router supports DDNS service of several service providers, for 
example: 
 
DynDNS (http://www.dyndns.org
) 
TZO (http://www.tzo.com
) 
 
Please go to one of DDNS service provider’s webpage listed above, and 
get a free DDNS account by the instructions given on their webpage. 
 
 
 
Here are descriptions of every setup items: 
 
Dynamic DNS (1):    If you want to enable DDNS function, please select 
‘Enabled’; otherwise please select ‘Disabled’. 
 
Provider (2):...

52 
After you finish with all settings, please click ‘Apply’ (6) button and the 
following message will be displayed on your web browser: 
 
 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
2-5-9 Setup...

53 
 
Here you will see the Access Point which you select.   
 
Here we provide WEP and PWA-PSK security settings for you to connect 
with ISP (Access Point). If your ISP does not ask you to input the security 
key, please choose “ Disable” and click “ Apply “ to save changes you 
made and restart the broadband router, this requires about 30 seconds and 
the broadband router will stop responding (this is normal and is not 
malfunction). You can reconnect to this broadband router and continue on 
other...