Getnet Router GR-724W User Manual

54 
2-6 Wired LAN Configuration 
 
Before all computers using wired Ethernet connection (i.e. those 
computers connect to this router’s LAN port 1 to 4 by Ethernet cable) can 
communicate with each other and access internet, they must have a valid 
IP address. 
 
There are two ways to assign IP addresses to computers: static IP address 
(set the IP address for every computer manually), and dynamic IP address 
(IP address of computers will be assigned by router automatically. It’s 
recommended for most of...

55 
Please follow the following instructions to set wired LAN parameters: 
 
Please click ‘LAN’ menu on the left of web management interface, there 
are three setup groups here: ‘LAN IP’, ‘DHCP Server’, and ‘Static DHCP 
Leases Table’. Here are setup instructions for each of them: 
 
 
2-6-1 LAN IP section: 
 
 
 
Here are descriptions of every setup items: 
 
IP address (1):      Please input the IP address of this router. 
 
Subnet Mask (2):    Please input subnet mask for this network. 
 
802.1d...

56 
2-6-2 DHCP Server: 
 
 
 
These settings are only available when ‘DHCP Server’ in ‘LAN IP’ 
section is ‘Enabled’, and here are descriptions of every setup items: 
 
Lease Time (1):    Please choose a lease time (the duration that every 
computer can keep a specific IP address) of every 
IP address assigned by this router from dropdown 
menu. 
 
Start IP (2):      Please input the start IP address of the IP range. 
 
End IP (3):       Please input the end IP address of the IP range. 
 
Domain Name...

57 
2-6-3 Static DHCP Leases Table: 
 
This function allows you to assign a static IP address to a specific 
computer forever, so you don’t have to set the IP address for a 
computer, and still enjoy the benefit of using DHCP server. Maximum 
16 static IP addresses can be assigned here. 
 
(If you set ‘Lease Time’ to ‘forever’ in ‘DHCP Server’ section, you can 
also assign an IP address to a specific computer permanently, however, 
you will not be able to assign a certain IP address to a specific...

58 
 
After you clicked ‘Add’, the MAC address and IP address mapping 
will be added to ‘Static DHCP Leases Table’ section. 
 
 
 
If you want to delete a specific item, please check the ‘Select’ box of a 
MAC address and IP address mapping (1), then click ‘Delete Selected’ 
button (2); if you want to delete all mappings, click ‘Delete All’ (3).   
 
After you finish all LAN settings, please click ‘Apply’ button on the 
bottom of this page. After you click ‘Apply’, the following message will 
be...

59 
2-7 Wireless LAN Configuration 
 
If your computer, PDA, game console, or other network devices which 
is equipped with wireless network interface, you can use the wireless 
function of this router to let them connect to Internet and share 
resources with other computers with wired-LAN connection. You can 
also use the built-in security functions to protect your network from 
being intruded by malicious intruders. 
 
Please follow the following instructions to set wireless parameters: 
 
2-7-1 Basic...

60 
router, to expand the scope of network.   
 
d. AP Bridge-Point to Multi-Point: Connect this router with up to four 
other wireless routers, to expand the scope of network. 
 
e. AP Bridge-WDS: Connect this router with up to four WDS-capable 
wireless routers, to expand the scope of network. 
 
f. Universal Repeater: The router can act as Station and AP at the same 
time. It can use Station function to connect to a Root AP and use AP 
function to service all wireless stations within its coverage....

61 
 
 
 
Here are descriptions of every setup items: 
 
Band (2):    Please select the radio band from one of following 
options: 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 1
2 
3
4 
2.4 GHz (B)  2.4GHz band, only allows 802.11b wireless 
network client to connect this router (maximum 
transfer rate 11Mbps). 
 
2.4 GHz (N)  2.4GHz band, only allows 802.11n wireless 
network client to connect this router (maximum 
transfer rate 150Mbps). 
 
2.4 GHz (B+G)    2.4GHz band, only allows 802.11b and...

62 
 
 
 
 
 
 
 
 
 
SSID (3):    This is the name of wireless router. You can type any 
alphanumerical characters here, maximum 32 
characters. SSID is used to identify your own 
wireless router from others when there are other 
wireless routers in the same area. Default SSID is 
‘default’, it’s recommended to change default SSID 
value to the one which is meaningful to you, like 
myhome, office_room1, etc. 
 
Channel Number (4): Please select a channel from the dropdown list of 
‘Channel Number’,...

63 
 
 
 
 
 
2-7-1-2 Setup procedure for ‘Station-Infrastructure’: 
 
In this mode, you can connect the router to Ethernet device such us TV, 
Game player, HDD&DVD to enable the Ethernet device be a wireless 
station and join to a wireless network through an access point or AP 
router. 
 
 
 
 
Here are descriptions of every setup items: 
Band (2):  Select the band you want to use. 
 
SSID (3):  This is the name of wireless network. You can type 
the SSID of the network you would like to connect 
here....