Getnet Router GR-724W User Manual

24 
 
If you want to go back to previous step, please press ‘Back’ button on the 
bottom of this page. 
 
 
 
 
 
2-3-1 Setup procedure for ‘Cable Modem’: 
 
 
 
Here are descriptions of every setup items: 
 
Host Name (1):     Please input the host name of your computer, this is 
        optional, and only required if your service provider 
            asks you to do so.   
 
MAC address (2):    Please input MAC address of your computer here, if 
your service provider only permits computer with 
certain...

25 
 
Here are descriptions of every setup items: 
 
IP address        Please input IP address assigned 
assigned by your    by your service provider. 
Service Provider (1):   
 
Subnet Mask (2):    Please input subnet mask assigned by your service 
provider  
 
DNS address (3):    Please input the IP address of DNS server provided 
by your service provider. 
 
Service Provider    Please input the IP address of DNS server 
Gateway Address (4): provided by your service provider. 
 
 
 
 
 
When you finish...

26 
2-3-3 Setup procedure for ‘PPPoE xDSL’: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):    Please input user name assigned by your Internet 
service provider here. 
 
Password (2):    Please input the password assigned by your Internet 
service provider here. 
 
Service Name (3):    Please give a name to this Internet service, this is 
optional 
 
MTU (4):    Please input the MTU value of your network 
connection here. If you don’t know, you can use 
default value. 
 
Connection...

27 
When you finish with all settings, please click ‘OK’ (7); if you want to go 
back to previous menu, click ‘Back’. 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2-3-4 Setup procedure for ‘PPTP xDSL’: 
 
PPTP xDSL requires two kinds of setting: WAN interface setting (setup 
IP address) and PPTP setting (PPTP user name and password). Here we 
start from WAN interface setting: 
 
 
 
Select the type of how you obtain IP address from your service provider 
here. You can choose ‘Obtain an IP address automatically’...

28 
WAN interface settings must be correctly set, or the Internet connection 
will fail even those settings of PPTP settings are correct. Please contact 
your Internet service provider if you don’t know what you should fill in 
these fields. 
 
Now please go to PPTP settings section: 
 
 
 
Here are descriptions of every setup items: 
User Name (1):    Please input user ID (user name) assigned by your 
Internet service provider here. 
 
Password (2):    Please input the password assigned by your Internet...

29 
BEZEQ network in Israel.  
 
Connection       Please select the connection type of Internet 
type (7):    connection you wish to use, please refer to last 
section for detailed descriptions. 
 
Idle Time        Please input the idle time out of Internet 
Out (8):    connection you wish to use, and refer to last section 
for detailed descriptions. 
 
When you finish with all settings, please click ‘OK (9); if you want to go 
back to previous menu, click ‘Back’. 
 
 
2-3-5 Setup procedure for ‘L2TP...

30 
WAN interface settings must be correctly set, or the Internet connection 
will fail even those settings of PPTP settings are correct. Please contact 
your Internet service provider if you don’t know what you should fill in 
these fields. 
 
Now please go to L2TP settings section: 
 
 
 
Here are descriptions of every setup items: 
 
User Name (1):     Please input user ID (user name) assigned by your 
     Internet service provider here. 
 
Password (2):    Please input the password assigned by your...

31 
for detailed descriptions. 
 
When you finish with all settings, please click ‘OK (7); if you want to go 
back to previous menu, click ‘Back’. 
 
 
2-3-6 Setup procedure for ‘Telstra Big Pond’: 
 
 
 
This setting only works when you’re using Telstra big pond’s network 
service in Australia. You need to input: 
User Name (1):     Please input the user name assigned by Telstra. 
 
Password (2):      Please input the password assigned by Telstra. 
 
User decide login      Check this box to choose login...

32 
 
 
Please click ‘Apply’ button to prepare to restart the router, and you’ll see 
this message: 
 
 
 
Please wait for about 30 seconds, then click ‘OK!’ button. You’ll be back 
to router management interface again, and the router is ready with new 
settings.  

33 
2-4 Basic Setup 
 
In this chapter, you’ll know how to change the time zone, password, and 
remote management settings. Please start your web browser and log onto 
router web management interface, then click ‘General Setup’ button on 
the left, or click ‘General Setup’ link at the upper-right corner of web 
management interface. 
 
 
 
 
 
2-4-1 Time zone and time auto-synchronization 
 
Please follow the following instructions to set time zone and time 
auto-synchronization parameters: 
 
Please...