Getnet Router GR-724W User Manual

104 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
3-3-1-1 Add  PC 
 
After button is clicked, the following message will be displayed on your 
web browser: 
  a 
b 
c 
d 
e 
f  

105 
 
Here are descriptions of every setup items: 
 
Client PC        Please input any text to describe this IP 
Description (a):    address, up to 16 alphanumerical characters. 
 
Client PC IP      Please input the starting IP address in the left 
address (b):    field, and input the end IP address in the right field 
to define a range of IP addresses, or just input the 
IP address in the left field to define a single IP 
address. 
 
Client PC        Please check all services you want to allow or...

106 
can use this function to stop computers in local network from accessing 
the site you defined here. 
 
This function is useful for parents and company managers. 
 
Please follow the following instructions to set URL blocking parameters: 
Please click ‘Firewall’ menu on the left of web management interface, 
then click ‘URL Blocking’, and the following message will be displayed 
on your web browser: 
 
 
 
Here are descriptions of every setup items: 
 
Enable URL      Check this box to enforce URL...

107 
 
Current URL      All existing URL/Keywords in filtering 
Blocking Table (5):    table will be listed here. 
 
Delete (6):    If you want to delete a specific URL/Keyword entry, 
check the ‘select’ box of the MAC address you want 
to delete, then click ‘Delete Selected’ button. (You 
can select more than one MAC addresses). 
 
Delete All (7):    If you want to delete all URL/Keyword listed here, 
please click ‘Delete All’ button. 
 
Reset (8):    You can also click ‘Reset’ button to unselect all...

108 
Internet connection will become very slow, and server may stop 
responding because it is not capable to handle too much traffics. 
 
This router has a built-in DoS attack prevention mechanism; when you 
activate it, the router will stop the DoS attack for you. 
 
Please follow the following instructions to set DoS prevention 
parameters: 
 
Please click ‘Firewall’ menu on the left of web management interface, 
then click ‘DoS’, and the following message will be displayed on your 
web browser:...

109 
Port Scan (3):    Some malicious intruder will try to use a ‘port 
scanner’ to know how many ports of your Internet 
IP address are open, and they can collect a lot of 
valuable information by doing so. Check this box 
and the router will block all traffics which are trying 
to scan your Internet IP address. 
 
Sync Flood (4):    This is another kind of attack, which uses a lot of 
fake connection request to consume the memory of 
your server, and try to make your server become 
unusable. Check this...

110 
3-3-3-1 DoS - Advanced Settings 
When you click ‘Advanced’ button in DoS menu, the following message 
will be displayed on your web browser: 
 
 
 
Here are descriptions of every setup items: 
 
Ping of Death (a):    Set the threshold of when this DoS prevention 
mechanism will be activated. Please check the box 
of Ping of Death, and input the frequency of 
threshold (how many packets per second, minute, or 
hour), you can also input the ‘Burst’ value, which 
means when this number of ‘Ping of...

111 
 
After you finish with all settings, please click ‘Apply’ (e) button and the 
following message will be displayed on your web browser: 
 
 
Please click ‘Continue’ to back to previous setup menu; to continue on 
other setup procedures, or click ‘Apply’ to reboot the router so the 
settings will take effect (Please wait for about 30 seconds while router is 
rebooting). 
 
If you want to reset all settings in this page back to previously-saved 
value, please click ‘Cancel’ button. 
 
 
3-3-4...

112 
 
 
Here are descriptions of every setup items: 
 
Enable DMZ (1):    Check this box to enable DMZ function, uncheck 
this box to disable DMZ function. 
 
Public IP        You can select ‘Dynamic IP’ or ‘Static IP’ here. 
address (2):    If you select ‘Dynamic IP’, you have to select an 
Internet connection session from dropdown menu; if 
you select ‘Static IP’, please input the IP address 
that you want to map to a specific private IP 
address. 
 
Client PC IP      Please input the private IP...

113 
 
 
Current        All existing public IP address and private IP 
DMZ Table (7):   address mapping will be displayed here. 
 
Delete (8):      If you want to delete a specific DMZ entry, check 
    the ‘select’ box of the DMZ entry you want to delete, 
then click ‘Delete Selected’ button. (You can select 
more than one DMZ entries). 
 
Delete All (9):    If you want to delete all DMZ entries listed here, 
please click ‘Delete All’ button. 
 
Reset (10):    You can also click ‘Reset’ button to...