Getnet Router GR-124W User Manual

 
66 
 
 
The parameters’ description of WEPAUTO mode, please refer to OPEN mode. 
- WPA-Enterprise 
 
The parameters of WPA-Enterprise mode are described as follows:  

 
67 
Field Description 
Security 
Mode Select WPA-Enterprise. 
WPA 
Algorithms You may select TKIP or AES. 
Key 
Renewal 
Interval Set the key renewal interval. 
IP Address  The IP address of RADIUS server. 
Port  The default port number is 1812. You may change it 
according to the server setting. 
Shared 
Secret The shared key that RADIUS server needs to 
authenticate. 
Session 
Timeout If this value is 0, it indicates that there is no session time 
limit. 
Idle Timeout  Set the idle timeout. 
 
-...

 
68 
Field Description 
Key 
Renewal 
Interval Set the key renewal interval. 
 
- WPA2-Enterprise 
 
 
The parameters of WPA2-Enterprise are described as follows: 
Field Description 
Security Mode  Select WPA2-Enterprise. 
WPA Algorithms  You may  select TKIP, AES, or TKIP + AES. 
Key Renewal 
Interval Set the key renewal interval. 
PMK Cache 
Period Set the PMK (Pairwise Master Key) cache period. 
PMK scheme allows the roaming users that pass 
through the 802.11X/EAP handshake protocol roam 
to the...

 
69 
Field Description 
roaming delay and improve the roaming speed. 
Pre-Authentication  Enable or disable pre-authentication. 
IP Address  The IP address of RADIUS server. 
Port  The default port number is 1812. You may change it 
according to the server setting. 
Shared Secret  The shared key that RADIUS server needs to 
authenticate. 
Session Timeout  If this value is 0, it indicates that there is no session 
time limit. 
Idle Timeout  Set the idle timeout. 
 
- WPA2-PSK 
 
 
The parameters of...

 
70 
 
 
The parameters’ description of WPA-PSK/WPA2-PSK mode, please refer to 
WPA2-PSK. 
- WPA1/WPA2-Enterprise 
 
 
The parameters of WPA1/WPA2-Enterprise are described as follows: 
Field Description 
Security Mode  Select WPA1/WPA2-Enterprise. 
WPA Algorithms  You  may select TKIP, AES, or TKIP + AES. 
Key Renewal 
Interval Set the key renewal interval.  

 
71 
Field Description 
IP Address  The IP address of RADIUS server. 
Port The default port number is 1812. You may change it 
according to the server setting. 
Shared Secret  The shared key that RADIUS server needs to 
authenticate. 
Session Timeout If this value is 0, it indicates that there is no session 
time limit. 
Idle Timeout  Set the idle timeout. 
 
- Dynamic WEP 802.1X 
 
 
The parameters of Dynamic WEP 802.1X mode are described as follows: 
Field Description 
Security Mode  Select Dynamic...

 
72   
  Access Policy 
 
 
The parameters of Access Policy are described as follows: 
Field Description 
Policy Disable: Stop the access control to the wireless devices in 
the MAC list. 
Allow: Allow the access control to the wireless devices in 
the MAC list. 
Reject: Reject the access control to the wireless devices 
in the MAC list. 
Add a 
station Mac Enter the MAC address of wireless device that you want to 
allow or reject. 
 
After finishing the settings, click the Apply button to apply the...

 
73 
connection information of the wireless network is displayed. See the following figure: 
 
 
5.4.5   Wireless WDS Setting 
The WDS modes of the GR-124W include Repeater mode, Bridge mode, and Lazy 
mode. 
 
Note: 
For better compatibility, please try to adopt the products with the same model to 
connect to the GR-124W. 
 
  WDS Repeater Mode   
In the Repeater mode, you can use the GR-124W to connect to the primary router, for 
extending the wireless coverage. 
 
 
Step1 Click Wireless > Basic to...

 
74 
 
 
Step2 On this page, set the AP channel to accord with the peer AP (An AP that 
wants to connect to the GR-124W by WDS). 
Step3 On the Basic Wireless Settings page, set the WDS mode to be Repeater 
Mode, set the physical mode and the encryption type of AP to accord with 
that of peer AP, and then enter the MAC address of the peer AP. After 
finishing the settings, click the Apply button to apply the settings. The 
GR-124W will work in the Repeater Mode.  

 
75 
 
 
Step4 Click Wireless > Security to display the Wireless Security/Encryption 
Settings page. 
 
 
Step5 On this page, set the security mode of the GR-124W to accord with the peer 
AP. 
 
Note: