Getnet Router GR-124W User Manual

 
106 
 
 
Keyword: Enter the key words of the host that needs to be filtered. 
After finishing the settings, click the Add button to add a new host filter. 
5.7   Administration 
The following figure shows the navigation menu of the Administration: 
 
 
The sub-menus of the Administration include Management, Upload, Settings, 
Status, Statistics and Log.
 
5.7.1   Management 
Click Administration > Management to display the System Management page.  

 
107 
 
 
This page provides administration settings, NTP settings, and DDNS settings. 
  Administrator Settings 
 
 
The parameters of Administrator Settings are described as follows: 
Field Description 
Account  Enter the account that you want to change. 
Password Enter the password for the new account. 
 
 
 
 
Note:  

 
108 
If you forget the account and the password, please press the Reset button. The 
system will return to the factory default settings. The default account and the 
password are Admin. 
  NTP Settings 
You may set the AP time to synchronize the time with your PC or the NTP server. 
 
 
The parameters of the NTP Settings are described as follows: 
Field Description 
Current Time  Display the current system time. Click the 
Sync with Host button, and then AP can 
synchronize its time with your PC....

 
109 
 
 
The parameters of DDNS Settings are described as follows: 
Field Description 
Dynamic DNS Provider  You may select a proper DDNS provider in 
the drop down list. The DDNS providers 
include Dyndns.org, freedns.afraid.org, 
www.zoneedit.com, and www.no-ip.com 
Account Enter the DDNS account. 
Password Enter the DDNS password. 
DDNS   Enter the domain name of DDNS. 
 
5.7.2   Upload Firmware 
Click Administration > Upload to display the Upload Firmware page. 
 
 
If you want to upload the...

 
110 
Upgrading firmware will make the AP return to the factory defaults. In order to avoid 
the settings loss, please save the settings before upgrading firmware. 
During upgrading, do not cut off the power or press the Reset button. 
 
5.7.3   Settings Management 
Click Administration > Settings to display the Settings Management page. 
 
 
The parameters on this page are described as follows: 
Field Description 
Export Settings  Click the Export button to save the settings to 
your local PC. 
Import...

 
111 
 
 
This page displays system information, Internet configuration, and local network 
settings. 
5.7.5   Statistic 
Click Administration > Statistics to display the Statistic page. 
  

 
112 
 
This page displays the memory status, the numbers of transmitted and received data 
packets of the WLAN, LAN, and WAN. 
5.7.6   System Log 
Click Administration > Log to display the System Log page. 
 
 
On this page, you are allowed to set the log server and view the system log. 
After enabling the remote log server and enter the IP address of the server, click the 
Apply button, and then the log information can be sent to the remote log server. 
 
  

 
113 
6   Troubleshooting 
Why you can not access Web page to configure AP? 
(1)   Open Web browser (i.e. IE) and select Tools > Internet Options…. 
 
 
(2)  Click Delete Cookies… and Delete Files… respectively. 
 
 
Why you can not establish the network connection? 
  Beyond the wireless coverage 
(1)  Place the device near to the client. 
(2)   Try to change the channel setting 
  Authentication problem 
(1)   Use the cable to connect the computer to the device. 
(2)  Check the network security...

 
114 
     Can not search the device. 
(1)   Try to reset the router and test the device again. 
(2)   Check the setting of the wireless network card. 
(3)   Check the SSID and the encryption setting. 
Why you can not access the Internet wirelessly via the device? 
(1)   Place the device to the wireless area where user can access the Internet. 
(2)   Check whether the wireless network card can connect to the right station. 
(3)   Check whether the wireless channel accords with the channel that your...

 
115