Getnet Router GR-124W User Manual

 
86 
 
 
The parameters of WEP (Wire Equivalence Protection) are described as follows: 
Field Description 
WEP Key Length  When selecting 64 bit (10 hex digits/5 ascii keys), 
it allows you to set 10-hex-digit or 
5-ASCII-character key. 
When selecting 128 bit (26 hex digits/13 ascii 
keys), it allows you to set 26-hex-digit or 13 - 
ASCII-character key. 
WEP Key Entry 
Method You may select Hexadecimal or ASCII text. 
WEP Keys (WEP 
key 1~4) For setting WEP keys. 
Default Key  Set a default key. 
 
-...

 
87 
 
 
The parameters of WPA are described as follows: 
Field Description 
WPA Algorithms  You  may select TKIP or AES. 
Pass Phrase  Set the encryption key. 
 
  Delete a Profile 
If you want to delete a preset profile (e.g. PR0F001), choose this profile and then click 
the Delete button. See the following figure: 
 
 
  Edit a Profile 
If you want to delete a preset profile (e.g. PR0F001), choose this profile and then click 
the Edit button. See the following figure:  

 
88 
 
 
On this page, you can modify the parameters of PROF001, such as SSID, network 
type and security mode.   
  Activate a Profile 
If you want to delete a preset profile (e.g. PR0F001), choose this profile and then click 
the Activate button. The activated file will be marked with an icon 
.See the 
following figure:  

 
89 
 
 
5.5.2  Link Status 
Click Wireless > Link Status to display the Station Link Status page. 
 
 
On this page, you can view the connection status of AP in the STA mode. 
5.5.3  Site Survey 
Click Wireless > Site Survey to display the Station Site Survey page.  

 
90 
 
 
On this page, you can view the scanned APs, scan the nearby APs, connect an AP, or 
add the connection parameters of an AP to the profile list. 
  Connect an AP 
If you want to connect an AP, choose the AP’s SSID, and then click the Connect 
button. If this AP is not encrypted, click the Apply button on the following page to 
establish connection. 
 
 
If this AP is encrypted, click the Connect button, and the following page appears.  

 
91 
 
 
On this page, you need to enter the password in the Pass Phrase field. 
After clicking the Apply button, and if this encrypted AP is connected successfully, 
the SSID of this AP is marked with a green icon 
. 
 
 
  Scan APs 
Click the Rescan button on the Station Site Survey page, and then you can rescan 
the nearby APs. If new APs are detected, Site Survey table will be refreshed.  

 
92    Add a Profile 
On the Station Site Survey page, select an AP in the Site Survey table, and then 
click the Add Profile button to enter System Configuration page. On System 
Configuration page, click the Apply button to add this AP to the profile list. 
5.5.4  Statistics 
Click Wireless > Statistics to display the Station Statistics page. 
 
 
On this page, you can view the status of transmitted and received data. 
Click the Reset Counters button, and then the data statistic information can be...

 
93 
 
 
This page is used to configure wireless advanced properties. 
The parameters of Advance Configuration are described as follows: 
Field Description 
Wireless Mode 
(Infra) The wireless modes include: 
   802.11 B/G mixed mode 
  802.11 B Only 
  802.11 G Only 
The default wireless mode is 802.11 B/G mixed 
mode. 
Country Region 
Code Select the proper country region code. For 
example, America’s (FCC) channel range is 1~11. 
Europe (ETSI) channel range is 1~13. 
B/G Protection  If 802.11b and...

 
94 
Field Description 
   On: Enable the B/G protection mode. 
   Off: Disable the B/G protection mode. 
Tx Burst  Enable or disable Tx Burst. After enabling this 
option, the transmission efficiency can be 
improved. 
 
5.5.6  QoS 
Click Wireless > QoS to display the Station QoS Configurations page. 
 
 
This page is used to configure the wireless QoS properties in the station mode. 
 
 
 
 
 
  QoS Configuration  

 
95 
 
 
The parameters of QoS Configuration are described as follows: 
Field Description 
WMM  Enable or disable WMM. 
WMM Power Saving  Enable or disable WMM power saving mode. 
PS Mode  Power saving modes include AC_BE, AC_BK, 
AC_VI, and AC_VO. 
Direct Link Setup  Enable or disable direct link setup. 
 
  Direct Link Setup (DLS) 
After enabling direct link setup, you are allowed to set the MAC address and timeout 
value. 
 
 
The parameters of Direct Link Setup are described as follows: 
Field...