Getnet Router GR-124W User Manual

 
96 
 
 
The figure above displays the DLS clients’ status.   
 
5.5.7  About 
Click Wireless > About to display the Station About page. 
 
 
On this page, you can view the AP’s driver version and MAC address. 
 
5.6   Firewall 
The following figure shows the navigation menu of Firewall: 
 
 
Firewall is an advanced setting, which is used to block or allow the data packets that 
pass through the AP. The sub-menus of the Firewall include Filtering, Forward, 
DMZ, System Security, and Content Filtering....

 
97 
 
 
  Basic Settings 
 
 
The parameters of Basic Settings are described as follows:  

 
98 
Field Description 
MAC/IP/Port 
Filtering Enable or disable MAC/IP/Port filtering. The 
default setting is Disable. 
Default Policy  By default, AP will accept all the packets that do 
not match any rule. 
 
  MAC/IP/Port Filter Settings 
 
 
The filter modes of MAC/IP/Port Filter Settings are described as follows: 
Filter Mode Description 
MAC Filter  MAC filter can block the hosts on the local 
network to access the Internet. 
IP Filter  IP filter can block a user on the LAN to access the...

 
99 
discarded. 
The parameters of MAC/IP/Port Filter Settings are described as follows: 
Field Description 
MAC Address  The MAC addresses included in the data packets. 
It can be a destination MAC address or a source 
MAC address. 
Dest IP Address  The destination IP address. 
Source IP Address  The source IP address. 
Protocol The protocol types of data packets, includes TCP, 
UDP, and ICMP. 
Dest Port Range  The destination port range is 1~65535. 
Source Port Range The source port range is 1~65535....

 
100 
 
 
  Virtual Server Settings 
 
The parameters of Virtual Server Settings are described as follows: 
Field Description 
Virtual Server Settings  Enable or disable the virtual server settings.  

 
101 
Field Description 
IP Address  Enter the IP address that you allow to access.
Protocol Select the protocol that you allow to access. 
You may select TCP, UDP or TCP&UDP. 
Port Range  Enter the port range that you allow to access.
Comment Enter the comment about the virtual server. 
 
  Current Virtual Servers in System 
 
 
The figure above shows the current virtual server in the system. 
5.6.3   DMZ 
DMZ allows all the ports of a PC on your LAN to be exposed to the Internet. Set the IP 
address...

 
102 
Field Description 
DMZ Settings  Enable or disable the DMZ settings. 
DMZ IP Address  Enter the IP address of the DMZ host. 
 
After finishing the settings, click the Apply button to apply the settings. 
5.6.4   System Security 
Click Firewall > System Security to display the System Security Settings page. 
 
 
This page provides the security management for the WAN interface. 
The parameters of System Security Settings are described as follows:
 
Field Description 
Remote management 
(Via WAN)...

 
103 
Field Description 
the firewall and makes sure that they are 
valid. When an IP packet arrives at the 
firewall from the Internet, the firewall inspects 
the packet to see what connections have 
been opened from the inside of the network to 
the Internet. If there is a connection open that 
applies to the packet that has arrived from the 
Internet, this incoming packet is let through; 
otherwise, this incoming packet is rejected. 
Compared to the NAT firewall, the security 
level of the SPI...

 
104 
  
 
  Webs Content Filter 
 
 
Webs Content Filter includes three types of filters. See the following table: 
Filter Description 
Proxy  For filtering the proxy pages. 
Java  For filtering pages that use Java script. 
ActiveX  For filtering plug-in pages.  

 
105 
 
  Current Webs URL Filters 
 
 
The figure above shows the current Web URL filters in the system. 
  Add a URL Filter 
 
 
URL: Enter the URL that needs to be filtered. 
  Current Website Host Filters 
 
 
The figure above shows the current Website host filters in the system. 
 
 
 
 
  Add a Host (keyword) Filter