Getnet Router GR-124W User Manual
Have a look at the manual Getnet Router GR-124W User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 7 Getnet manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
66 The parameters’ description of WEPAUTO mode, please refer to OPEN mode. - WPA-Enterprise The parameters of WPA-Enterprise mode are described as follows:
67 Field Description Security Mode Select WPA-Enterprise. WPA Algorithms You may select TKIP or AES. Key Renewal Interval Set the key renewal interval. IP Address The IP address of RADIUS server. Port The default port number is 1812. You may change it according to the server setting. Shared Secret The shared key that RADIUS server needs to authenticate. Session Timeout If this value is 0, it indicates that there is no session time limit. Idle Timeout Set the idle timeout. - WPA-PSK The parameters of WPA-PSK mode are described as follows: Field Description Security Mode Select WPA-PSK. WPA Algorithms Select TKIP or AES. Pass Phrase Set 8-bit to 64-bit key.
68 Field Description Key Renewal Interval Set the key renewal interval. - WPA2-Enterprise The parameters of WPA2-Enterprise are described as follows: Field Description Security Mode Select WPA2-Enterprise. WPA Algorithms You may select TKIP, AES, or TKIP + AES. Key Renewal Interval Set the key renewal interval. PMK Cache Period Set the PMK (Pairwise Master Key) cache period. PMK scheme allows the roaming users that pass through the 802.11X/EAP handshake protocol roam to the previous AP again. PMK can decrease the
69 Field Description roaming delay and improve the roaming speed. Pre-Authentication Enable or disable pre-authentication. IP Address The IP address of RADIUS server. Port The default port number is 1812. You may change it according to the server setting. Shared Secret The shared key that RADIUS server needs to authenticate. Session Timeout If this value is 0, it indicates that there is no session time limit. Idle Timeout Set the idle timeout. - WPA2-PSK The parameters of WPA2-PSK mode are described as follows: Field Description Security Mode Select WPA2-PSK. WPA Algorithms You may select TKIP, AES, or TKIP + AES. Pass Phrase Set 8-bit to 64-bit key. Key Renewal Interval Set the key renewal interval. - WPA-PSK/WPA2-PSK
70 The parameters’ description of WPA-PSK/WPA2-PSK mode, please refer to WPA2-PSK. - WPA1/WPA2-Enterprise The parameters of WPA1/WPA2-Enterprise are described as follows: Field Description Security Mode Select WPA1/WPA2-Enterprise. WPA Algorithms You may select TKIP, AES, or TKIP + AES. Key Renewal Interval Set the key renewal interval.
71 Field Description IP Address The IP address of RADIUS server. Port The default port number is 1812. You may change it according to the server setting. Shared Secret The shared key that RADIUS server needs to authenticate. Session Timeout If this value is 0, it indicates that there is no session time limit. Idle Timeout Set the idle timeout. - Dynamic WEP 802.1X The parameters of Dynamic WEP 802.1X mode are described as follows: Field Description Security Mode Select Dynamic WEP 802.1X. IP Address The IP address of RADIUS server. Port The default port number is 1812. You may change it according to the server setting. Shared Secret The shared key that RADIUS server needs to authenticate. Session Timeout If this value is 0, it indicates that there is no session time limit. Idle Timeout Set the idle timeout.
72 Access Policy The parameters of Access Policy are described as follows: Field Description Policy Disable: Stop the access control to the wireless devices in the MAC list. Allow: Allow the access control to the wireless devices in the MAC list. Reject: Reject the access control to the wireless devices in the MAC list. Add a station Mac Enter the MAC address of wireless device that you want to allow or reject. After finishing the settings, click the Apply button to apply the settings. 5.4.4 Station List Click Wireless > Station List to display the Station List page. On this page, you can view the wireless networks that connect to the GR-124W. If there is any wireless network connects to GR-124W, refresh this page and the
73 connection information of the wireless network is displayed. See the following figure: 5.4.5 Wireless WDS Setting The WDS modes of the GR-124W include Repeater mode, Bridge mode, and Lazy mode. Note: For better compatibility, please try to adopt the products with the same model to connect to the GR-124W. WDS Repeater Mode In the Repeater mode, you can use the GR-124W to connect to the primary router, for extending the wireless coverage. Step1 Click Wireless > Basic to display the Basic Wireless Settings page.
74 Step2 On this page, set the AP channel to accord with the peer AP (An AP that wants to connect to the GR-124W by WDS). Step3 On the Basic Wireless Settings page, set the WDS mode to be Repeater Mode, set the physical mode and the encryption type of AP to accord with that of peer AP, and then enter the MAC address of the peer AP. After finishing the settings, click the Apply button to apply the settings. The GR-124W will work in the Repeater Mode.
75 Step4 Click Wireless > Security to display the Wireless Security/Encryption Settings page. Step5 On this page, set the security mode of the GR-124W to accord with the peer AP. Note: