Getnet Router GR-124W User Manual

 
26 
 
 
If this AP is not encrypted, you can click the Apply button on the pop-up page to 
confirm the connection. 
If the AP that you want to connect is encrypted, you need to enter the key on the 
pop-up page. 
If the connection succeeds, the SSID of the AP in the Site Survey list will be marked 
with an icon 
. 
 
  

 
27 
After finishing the connection, you may establish PPPoE, L2TP, PPTP, DHCP, and 
Static connections. For more details, please refer to 5.3.2 WAN.  

 
28 
5   Web Configuration 
5.1   Overview 
After finishing login, system displays the Overview page. The Overview page 
includes Status, Statistic, and Management submenus 
 
5.1.1   Status 
Click Status on the Overview page to display the Access Point Status page. 
 
 
This page displays system information, Internet configuration, and local network 
settings. 
5.1.2   Statistic 
Click Statistic on the Overview page to display the Statistic page.  

 
29 
 
 
This page displays the memory status, the numbers of transmitted and received data 
packets of the WLAN, LAN, and WAN. 
5.1.3   Management 
Click Management on the Overview page to display the System Management 
page.  

 
30 
 
 
This page provides administration settings, NTP settings, and DDNS settings. For 
more details, please refer to 5.7.1 Management.
 
5.2   Operation Mode 
Click the Operation Mode to display the Operation Mode Configuration page.  

 
31 
 
 
GETNET GR-124W provides three types of operation modes, including Bridge, 
Gateway, and WISP modes. 
The parameters on this page are described as follows: 
Mode Description 
Bridge  In the bridge mode, AP acts as a hub. 
Gateway  In the gateway mode, GR-124W allows routing between 
WAN and LAN, or WAN and wireless network. 
WISP  In the WISP mode, all the Ethernet interfaces can access 
the Internet by wireless routing. 
NAT 
Enabled Only in the gateway mode can this function be used. After...

 
32 
 
 
The sub-menus of the Internet include LAN, WAN, Advanced Routing, DHCP, and 
QoS. 
5.3.1   LAN 
Click Internet > LAN to display the Local Area Network (LAN) Settings page.  

 
33 
 
 
This page is used to configure the LAN parameters. This page allows you to  

 
34 
configure LAN interface properties, DHCP server properties, and other parameters 
related to LAN. 
The parameters on this page are described as follows: 
Field Description 
IP Address  The IP address of the LAN interface. The default IP 
address is 192.168.1.1. 
Subnet Mask  The subnet mask of the IP address of the LAN interface. 
The default subnet mask is 255.255.255.0. 
LAN 2  Enable or disable the second IP address of the LAN 
interface. The default setting is Disable. 
LAN 2 IP 
Address The...

 
35 
Field Description 
Spanning Tree  generating loop. You may select Enable or Disable. 
LLTD  After enabling LLTD (Link Layer Topology Discovery), 
Windows Vista automatically discovers other devices’ link 
topologies, and these devices are also compatible with 
LLTD. You may select Enable or Disable. 
IGMP Proxy  Enable or disable IGMP Proxy. 
IGMP Snooping  Enable or disable IGMP Snooping. After enabling this 
function, the packets of the IGMP broadcast will not be 
sent to the LAN interface that...