GE Vivid E9 User Manual

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 114 
Tissue Velocity Imaging – calculates and color-codes the 
velocities in tissue. The velocity is acquired by sampling of 
tissue Doppler velocity values at discrete points. 
QRS Detect – QRS is ventricular depolarization part of a normal 
EKG waveform which is easiest to detect to count a single heart 
beat due to it having the highest amplitude. 
  

GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 
Acronyms 
AC – Alternating Current 
ACR – American College of Radiology 
AE – Application Entity 
ASIC – Application Specific Integrated Circuit 
ADC – Analog to Digital Converter 
ATCG – Real Time TGC analog Control bus 
ATGC – Advanced Analog Time Gain Compensation  
ATO – Automatic Tissue Optimization 
BEP – Back End Processor 
BEPPS – Back End Processor Power Supply 
BF – Body Floating 
CB – Charge Board 
CF – Cardiac Floating 
CLA –...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 116 
FEP – Front End Processor 
FPD – Flat Panel Display 
FPGA – Field Programmable Gate Array 
FRU – Field Replaceable Unit 
GFI – Global Frontend Interface 
GRLY – Global Relay Board 
GRX – Receiver Boards 
GTX – Transmitter Boards 
HDD – Hard Disk Drive 
HIS – Hospital Information System 
IC – Integrated Circuit 
HSS – High Speed Serial bus 
IEC – International Electrotechnical Commission 
IPS – In Plane Switching 
IT – Information...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 117 
TI – Transducer Interface Board 
TR – Transmit/Receive Board 
TVI – Tissue Velocity Imaging 
UFP – Front Panel Board 
UOP – Upper Operator Panel 
USB – Universal Serial Bus 
VCR – Video Cassette Recorder 
VGA – Variable Gain Amplifier 
VI – Video Interface 
  

GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 
Appendix 1 Network Configuration 
Worksheets 
You can print out these pages to gather information when preparing 
for network configuration. Most of the necessary information can be 
obtained from the system administrator or IT department of the 
facility. 
Checklist for Configuring Ultrasound System Network 
Parameters 
Parameter  Description  
Alias  A unique identifier for the DIMAQ-IP host AE Title. 
The alias is only used only by the...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 119 
Parameter  Description  
Gateway  The IP address for the gateway, which indicates 
where to direct TCP/IP traffic destined for another 
subnet. Not all systems require a gateway IP 
address. 
 
AE Title  The AET for the storage device. 
 
Port  The network port that the storage device uses to 
communicate with the ultrasound system. 
 
Storage 
Commitment  
Does the device support storage commitment? 
 
Archive  Is the device intended as...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 120 
Parameter  Description  
communicate with the ultrasound system 
 
 
To complete the DICOM Print Device Configuration you will also need 
to gather the following information from the device vendor: 
 The type of print device. 
 The film sheet format (for the Film Sheet Formats option; only 
required if the customer plans to use a format other than the 
default format). 
 The media it uses: blue film, clear film, or paper (for the...

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 121 
DICOM Devices to Connect to System: 
DICOM (network) printer 
 
 
Yes   
No   
DICOM storage server 
 
 
Yes   
No   
DICOM commit server 
 
 
Yes   
No   
DICOM PPS server 
 
 
Yes   
No   
DICOM structured report 
server 
 
Yes   
No   
DICOM Analog Printer 
 
 
Yes   
No   
 
Other Needed Information: 
Maximum Network Speed 
 
 
If a printer is to be 
connected the 
manufacturer and model 
number of the printer....

 GE Logiq E9/Vivid E9 Training Manual 
© 2016 Conquest Imaging 122 
Device Name 
 
 
Printer Information 
 
 
Number of copies 
 
(usually one) 
Film Size 
 
 specified 
Film Medium 
 
 
Film Display Format 
 
 
Film Orientation Portrait    
Landscape  