GE Vivid 7 User Manual

Archiving
Vivid7/Vivid7 PRO Users Manual327
FC092326-03
Sending a job to a new destination
Only jobs that 
failed or are in hold 
can be sent to a new 
destination.1. Trackball to the job to send in the DICOM job spooler 
window.
2. Press 
SELECT.
3. Trackball to Send to....
4. Press 
SELECT.
A dialogue window is displayed.
5. Select the new destination from the Destination popup 
menu.
6. Trackball to Send.
7. Press 
SELECT. 

Archiving
328Vivid7/Vivid7 PRO Users Manual
FC092326-03
Data Backup and restore
The Backup/Restore function enables the user to:
•  Copy/Restore the patient archive (patient data and reports).
•  Move images from the local harddrive to MO disks.
•  Copy/Restore the system configuration.
To minimize accidental loss of data, perform backup of the 
patient archive (patient data and reports) stored on the local 
harddrive at least once a week.
There is no backup function for the images (no creation of a...

Archiving
Vivid7/Vivid7 PRO Users Manual329
FC092326-03
Backup procedure
If moving images, make sure to have enough formatted MO 
disks before disponible.
When formatting 
the MO disk, give it 
a logical name and 
make sure to physi-
cally label the disk 
with the mention 
“Backup”. A label-
ling convention 
should be followed 
so that each MO 
disk gets a unique 
label.1. Insert a dedicated formatted (see page 435) MO disk in the 
MO drive.
2. Press 
CONFIG (F2) on the alphanumeric keyboard.
The Log In...

Archiving
330Vivid7/Vivid7 PRO Users Manual
FC092326-03
a dialogue window is displayed. Press OK, the media is 
ejected and insert a new formatted MO disk.
A progress dialogue is displayed showing the current 
operation being performed.
If the amount of data exceeds the capacity of the MO disk 
the user is prompted to insert a new (formatted) MO disk.
At the end of the process a status for each item is 
displayed in the Result column.
If errors occur during backup, a list of the patient records/...

Archiving
Vivid7/Vivid7 PRO Users Manual331
FC092326-03
Set up backup reminder
1. In the Backup sheet, select the time interval (or none) for 
the backup reminder next to Backup interval.
When the backup reminder time expires a reminder is 
displayed when starting the system to prompt the user to 
take a backup.
 Figure 8-36: The Backup reminder prompt 

Archiving
332Vivid7/Vivid7 PRO Users Manual
FC092326-03
Restore procedure
1. Insert the Backup/Restore MO disk in the MO drive.
2. Press 
CONFIG (F2) on the alphanumeric keyboard.
The Log In window is displayed asking for operator ID and 
password.
3. Select the user with administration rights and enter the 
password.
4. Select Log on.
The Setup dialogue window is displayed.
5. Select the Admin setup category.
6. Select the Restore sheet in the Admin setup category 
(Figure 8-37).
7. Select:
• Patient...

Archiving
Vivid7/Vivid7 PRO Users Manual333
FC092326-03
 Figure 8-37: The Restore setup sheet
1. Select the item to restore
2. Select the Backup/Restore disk3. Start restoring data
4. Reset the system setting to factory default. 

Archiving
334Vivid7/Vivid7 PRO Users Manual
FC092326-03 

Report
Vivid7/Vivid7 PRO Users Manual335
FC092326-03
Chapter 9 
Report
This chapter includes the following information:
• Introduction  ................................................................................... ..  336
• Creating a report  ........................................................................... ..  337
• Working with the report function ............................................... 337
• To print a report...

Report
336Vivid7/Vivid7 PRO Users Manual
FC092326-03
Introduction
The Vivid 7/Vivid 7 PRO system enables the generation of 
patient reports, based on the examination performed and the 
analysis that were made during the examination. The reports 
are generated using the data that is stored in the system, using 
pre-selected templates.
Saved reports are read-only. Therefore it is recommended that 
the data be carefully reviewed before the report is created. Use 
the worksheet (see page 230) to facilitate...