Fujitsu Myrica Vq40 1 Operating Manual

Overview
5 ENGLISH
Connection sockets
161517141219810
3459
20
21
1813
672
11
1
11DIG OUT COAX
Connection of an AV amplifier with a coaxial, digital
audio input
1LINE OUT SUB12DIG IN COAX
Connection for an active sub-woofer Connection of devices with a coaxial, digital audio output
2LINE OUT L/R(audio output)13PC AUDIO IN
E.g. connection of an audio amplifier or DVD receiver E.g. PC audio input with a line-out socket
3RF IN(aerial input, main tuner)14HDMI(High Definition Multimedia Interface)
Must be...

6ENGLISH
Remote control
To be able to control the LCD/plasma TV with the remote con-
trol, the mains plug must be plugged in and the mains switch
must be switched on.
The infrared remote control functions only if there are no
obstructions between the control and the infrared sensor on
the front side (bottom right) of the LCD/plasma TV. The range
of the remote control is approx. 6 m.
If the batteries become weak, the range of the remote control
is reduced. In this case please change the batteries. You...

7 ENGLISH
Control elements on the unit
The functions of the buttons on the unit match those on the
remote control!
1= Pilot lamp standby mode orange
PilotlampOnblue
Infrared receiver
2= On/Off switch for standby mode
Opens main menu / submenus
3= P- Decreases the channel number.
Navigation in the OSD menu.
P+ Increases the channel number.
Navigation in the OSD menu.
4=
- Reduces the volume.
Navigation in the OSD menu.
+ Increases the volume.
Navigation / execution of a function in the OSD menu.
ENGLISH
 

Preparations
8ENGLISH
Preparations
Viewing direction
DDespite the large viewing angle the LCD/plasma TV
offers the best performance with a directly vertical view-
ing direction. Align the LCD/plasma TV with the most
frequently used viewing direction.
Location
DLight reflection
Avoid locating the unit opposite windows or other light
sources.
DAccess to the mains input
The mains input and mains switch should be easily
accessible at all times.
DAir supply
To ensure sufficient ventilation, the supply air...

Preparations
9 ENGLISH
DFit the 2 fastening hooks (rawl plugs and fastening
hooks arenotincluded in the items supplied) horizon-
tally to the wall with the appropriate distance between
them (for this distance see Drilling template).
Openings for
fastening
hooks
min. 6.5 mm dia.
Drilling template
The fastening material must be designed for 3-times
the weight of the display. If necessary, please con-
sult a qualified installer.
DPosition the LCD/plasma TV so that the fastening hooks
can be introduced into...

10ENGLISH
Connection of an aerial
SIf you would like to connect cable or a terrestrial
aerial, use the ”AERIAL” socket provided for this
purpose.
Insertion of the batteries into the remote control
SOpen the cover of the battery component.
SInsert the two batteries (AAA) supplied into the
battery compartment.
Pay attention to the polarity (+) and (-) marked on
the bottom of the battery compartment.
SClose the cover of the battery compartment.
Using the remote control
Use the remote control within a...

11ENGLISH
Initial installation
After switching on the LCD/plasma TV the first time you must successively set the language and the country. After that the auto-
matic station search starts.
Setting the language
SWith the button [Y]or[B] select your national
language. Press the [MENU] button.
Selection of country for the sorting sequence
SSelect the country in which the LCD/plasma TV is
being operated with the button [
Y]or[B].
This setting will cause a country-specific sorting
sequence of the TV...

Operator control
12ENGLISH
Operator control
Switching on / off
STo switch on the LCD/plasma TV press the
[POWER] button on the remote control or the button
/MENU on the set.
The indicator Power On / Standby lights up blue on the
LCD/plasma TV.
STo switch off the LCD/plasma TV press the
[POWER] button on the remote control.
The indicator Power On / Standby lights up orange on
the LCD/plasma TV.
If a signal is pending at any input, the LCD/plasma TV
is switched automatically to standby mode after a
waiting...

Operator control
13ENGLISH
With the buttonon the remote control switch the
sound to mute.
SPress the button, the sound is now mute.
SPress the buttonagain to cancel out mute again.
You can also use the button [VOL
]todothis.
Use of the picture-in-picture function
The picture-in picture function offers you the possibility of viewing a second picture source in addition to watching the TV
programme.
The second reception unit (tuner), DVD player, video recorder, SAT receiver or PC can be used as the picture...

Operator control
14ENGLISH
Possibilities of combining the source with a Secondary input
= source combinable with Secondary input
- = source not
combinable with Secondary input
Secondary input
SourceTunerSCART1SCART2CVBSYCYUVHDMIPC
(RGB)PC
(DVI)
Tuner*
SCART1-
SCART2-
CVBS--
YC-
YUV-----
HDMI----
PC (RGB)----
PC (DVI)----
*only on sets with twin tuners
If no signal is pending at the selected PIP source, the picture-in-picture function is terminated after approx. 30 seconds.
Still picture
You can view...