Fujitsu F02d Manual

							79
Others
Support
Troubleshooting
Check for the necessity of software update first, and update the software if necessary. ðP83
When checking the following items not to improve the state, contact Repairs on the last page of this 
manual (in Japanese only) or DOCOMO-specified repair office.
✜ Power supply and chargingÔFOMA terminal cannot be turned ON.
KIs the battery pack installed correctly?
KIs the battery exhausted?ÔThe FOMA terminal cannot be charged (the light 
does not turn on while charging).

KIs the battery pack installed correctly?
KAre the adapter and FOMA terminal set correctly?
KIs the AC adapter connector securely inserted to 
FOMA terminal or the desktop holder that came with 
the terminal when you use AC adapter (optional)?

KIs AC adapters power plug or cigarette lighter plug 
inserted to the outlet or cigarette lighter socket correctly?

KIs the charging jack of FOMA terminal dirty when 
you use desktop holder? If it is dirty, clean with a 
dry cotton swab.

KIf you call, perform communication or operate 
other function for a long time while charging, the 
temperature of the FOMA terminal is raised and 
the light may turn off. When temperature is high, 
charging stops for safety. After using, wait until 
the temperature of the FOMA terminal drops and 
retry charging.
ÔCharging cannot be completed (Battery level gets 
low even while the battery is charged)
Charging may not be completed during a call or 
communication. Or, if you start charging while 
watching/recording 1Seg, playing moving picture/i-
motion, downloading Music&Video Channel 
program, activating Music&Video Channel player or 
Music player, or operating i-
αppli, the battery level 
may get low depending on charging adapter and 
charging may not be completed. It is not abnormal 
condition of the FOMA terminal. To complete 
charging, terminate terminal operations and then 
charge the battery.
✜ Terminal operationÔTurning the power off or restarting automatically 
happens.
If the jack of battery pack is dirty, the contact may 
become poor and the power may shut OFF. If it is 
dirty, clean with a dry cotton swab.
ÔNo operations are performed even by keypad and 
touch operations.

KHave you activated All lock, Omakase Lock, Side 
key hold, Auto-key lock or touch lock?

KWhen eco mode is ON and set to Full saving, 
touch operation is disabled.
ÔThe operation time provided by the battery pack is 
short.

KIs your terminal left for a long time under the state 
of out of service area? Out of service area, much 
power is consumed to search available radio 
waves.

KThe operation time provided by the battery pack 
varies by the operating environment and battery 
packs deterioration.

KThe battery pack is a consumable part. Each time it 
is charged, time available with each charging 
reduces. Even the full charge state, when the 
operation time is too short, purchase a new 
battery pack of the specified type.
ÔThe docomo mini UIM card is not recognized.
KIs the docomo mini UIM card installed in the right 
direction? 
						

							80
Others
ÔFOMA terminal etc. become hot while operating/
charging.
While operating or charging, or if you use i-αppli, 
videophone call, 1Seg watching, etc. for a long time 
while charging the battery, FOMA terminal, battery 
pack and adapter may become hot. There is no 
problem about safety and continue to use it.
ÔThe clock is not on time.The clock time may become wrong while turning on 
the power for a long time. Set Auto time adjust of 
Date and time setting to ON and turn the power off 
and on in a place with strong radio wave conditions.
✜ Calls
ÔCalls are not connected (Even when moving, MŽ 
(out of service area) does not disappear or 
although radio waves are enough, making/
receiving calls is unavailable).

KTurn the power off and on, or remove and attach 
the battery pack or the docomo mini UIM card.

KEven when the signal meter on your FOMA 
terminal indicates there are strong radio waves, 
due to the type of radio waves, making/receiving 
calls may be unavailable. Move to call again.

KIs Call rejection setting or 3G/GSM setting set?
KDue to the crossing of radio waves, at the crowded 
public places, calls/mails are crossed and the 
connection status may not be good. In this case, 
Please wait for a while appears and the caller 
hears a busy tone. Move to other place or call 
again at other time.
ÔCalls cannot be made using the keypads.Have you activated All lock, Omakase Lock, Self 
mode, Keypad dial lock, Auto-key lock or Call/Mail of 
Function lock under Kid-safe mode?
✜ CameraÔStill images or moving pictures taken with the 
camera are blurry

KMake sure that the camera lens is not obscured or 
stained.

KUse Auto in Shoot by scene.
KAuto focus (Manual), Tracking focus, or Touch AF 
can also be used to focus.

KWhen shooting an object at a close range, set AF 
mode to Closeup, and when shooting people, 
switch to Face priority AF.

KSet Fix camera shake and shoot.
✜ Osaifu-KeitaiÔOsaifu-Keitai function is unavailable.
KWhen removing the battery pack, IC card functions 
are unavailable regardless of the IC card lock 
settings.

KHave you activated Omakase Lock or IC card lock?
KDo you place   mark of FOMA terminal over IC 
card reader? 
						

							81
Others
Support
Warranty and After-Sales Service

KFOMA terminal is provided with a written 
warranty. Make sure that you receive it. Check 
the written contents and items such as 

b
3
Ê~S
M	Í[Ô (Shop name/date of 
purchase) and keep it in a safe place. If it does 
not contain the necessary information, 
immediately contact the shop where you bought 
it. The warranty is valid for a period of one year 
from the date of purchase.

KThis product and all accessories are subject to 
change, in part or whole, for the sake of 
improvement without prior notice.
✜ When problems occurBefore requesting repair, read the section on 
Troubleshooting in this manual or in 
						

							82
Others
✜ Notes
KDo not modify FOMA terminal or its accessories.
- Repair may be refused depending on the nature of modification. The following cases may be 
regarded as modifications.
- A sticker etc. is put on the display or keypad part
- FOMA terminal is embellished with adhesive  material etc.
- Exteriors are replaced with other than 
DOCOMOs genuine parts
- Repair of failures or damage caused by  modification is charged even during the 
warranty period.

KDo not remove any inscription stickers attached to 
FOMA terminal.
If confirmation of the inscription stickers content 
is impossible, determination of whether specific 
technical standards are sa tisfied cannot be made. 
Therefore, repair may be refused.

KFunction settings and information may be cleared 
(reset) by malfunctions, repair or other handling 
of FOMA terminal. Should that happen, set up the 
functions again.

KIf repair is executed, MAC address for Wi-Fi and 
Bluetooth address may be changed regardless of 
malfunction part.

KMagnetic components are used in the earpiece, 
speaker, etc. of the FOMA terminal. Do not allow 
cash cards or other devices that are vulnerable to 
magnetism to come into contact with the phone.

KThis FOMA terminal is waterproof. However, if 
inside of the terminal gets wet or moist, turn the 
power off, remove the battery pack immediately, 
and bring the terminal to a repair office as soon 
as possible. However, repair may not be possible 
depending on the condition of FOMA terminal.
Support
Error info send set.
Make settings to send error information to 
DOCOMO if an error occurs on your terminal. 

KInformation is sent at night. Packet 
communication fee is not charged.

KPersonally identifiable information is not 
included.

KSome types of errors may not be recorded.
a m eh Settingei Other settinge
f
 Error info send set.eAuthenticatee
aON  or b OFF
Support
i-mode fault diagnosis site
Using your FOMA terminal, you can check 
whether sending/receiving of messages and 
downloading of images and melodies are 
normally performed. When FOMA terminal is 
assumed to have malfunctions as the result of the 
diagnosis, contact Repairs on the last page of 
this manual (in Japanese only).
i-mode site : iMenuðSŒ’d 
(Notice)ð±Ù”Ä	ØC 
(Support information)ðSð
Mù˜d (Inquiries)ð‚	Ë~?
þ	ݯSðMù˜d
Π
(Checking malfunction/radio 
wave condition)

						

							83
Others
Support
Updating software
This function allows you to connect the network 
and check if software in the FOMA terminal needs 
to be updated, if software update is necessary, 
download a part of software using packet 
communication and update the software.
When software update is required, information is 
posted in 
Sl7±Ù”Ä (user support) on NTT 
DOCOMO website or iMenu (in Japanese only). 
Software may be updated in 3 methods: Auto-
update, Immediate update and Reserved 
update.
*Software update can be done even when various 
data, such as a phonebook registered in FOMA 
terminal, camera images, downloaded data, are 
remaining; note that data protection sometimes 
cannot be secured according to the conditions of 
your FOMA terminal (such as malfunction, damage, 
or water leak). DOCOMO recommends backing up 
necessary data. However some data such as 
downloaded data may not be backed up.
✜ When updating software
KDo not remove the battery pack while updating 
software. The update may fail.

KSoftware update should be done with battery fully 
cha r g e d.

KSoftware update (downloading or rewriting) may 
take time.

KMaking/Receiving calls, communications 
functions and other functions are disabled during 
software update (Only incoming voice calls can 
be answered while downloading).

KIt is recommended that software update be 
executed in good radio wave conditions with  three bars of the antenna icon displayed and the 
terminal not moved. If radio wave conditions 
become weaker during software download or the 
download is stopped, retry software update in a 
place with strong radio wave conditions.

KWhen updating software, your private 
information concerning FOMA terminal (model, 
serial number, etc.) is automatically sent to the 
server (the server for software update managed 
by DOCOMO). DOCOMO does not use the sent 
information for purposes except software update.

KWhen software update has failed, Rewrite failed 
appears and all operation becomes unavailable. 
In that case, please bring the FOMA terminal to 
DOCOMO-specified repair office.
From the status menu, select Check in   
(update notification icon), or start from the menu.
 Starting from the update notification 
icon
ageSelect the status areaeFrom the 
status menu, select Check in   
(update notification icon) 
eYeseAuthenticate
bThe check result appearsWhen update is necessary, Update is needed 
appears. Select Now update or Reserve.
 Starting from the menu
a m eh Settingei Other settinge
e Software updateeAuthenticatee
Update
Updating 
						

							84
Others
Support
Scanning function (Security Scan)
For the data or programs that are imported to 
FOMA terminal, this function detects data and 
deletes data or inhibits activation of applications 
that may cause troubles.

KThe Scanning function provides a certain 
countermeasure against invasion of data which 
causes some trouble in the mobile phone, when 
viewing website, receiving messages, etc. Note 
that, if pattern definition corresponding to 
specific troubles has not been downloaded to 
the mobile phone or such pattern definition 
does not exist, this function cannot prevent 
those troubles from occurring.
ÔUpdating pattern definitionsUpdate pattern definition first, then keep the 
pattern definition up-to-date.
You can set FOMA terminal so that pattern 
definitions can be automatically updated.
am eh Settingef Lock/Securitye
f Scanning functione b Set auto-
update
eEnableeYeseYese
OKWhen the Auto-updating pattern definitions is 
executed,   or   appears on the stand-by 
display.
*Selecting Detail on each screen displays a list of names 
of the detected problem elements. When 6 or more 
problem elements have been detected, the names of the 
6th and subsequent problem names are omitted.
Set auto-update
Scan result
Warning levelActions
[0] Operation 
may not run 
properly.OK : Continue processing of the 
started application
[1] Operation 
may not run 
properly. 
Cancel 
operation?
Yes : Stop processing of the 
application that may cause 
troubles
No : Continue processing of the 
started application
[2] Operation 
may not run 
properly. 
Canceling 
operation.
OK : Stop processing of the 
application that may cause 
troubles
[3] Operation 
may not run 
properly. 
Delete data?
Yes : Delete data that may cause 
troubles
No : Stop processing of the 
application that may cause 
troubles
[4] Operation 
may not run 
properly. 
Deleting data.
OK : Delete data that may cause 
troubles 
						

							85
Others
Support
Options and related devices
Combining FOMA terminal with optional 
accessories supports a wide variety of uses from 
personal use to business use. Some products are 
unavailable depending on the area.
For details, contact a sales outlet such as docomo 
Shop. For details about the optional devices, refer 
to the instruction manual for each device.

KBattery Pack F22
KBack Cover F64
KFOMA AC Adapter 01/02*1

KDesktop Holder F33
KCarry Case L 01
KCarry Case S 01
KCarry Case 02
KFlat-plug Stereo Earphone Set P01*2

KFlat-plug Earphone/Microphone with Switch 
P01*2/P02*2

KEarphone Plug Adapter for External connector 
terminal 01

KEarphone Plug Adapter 01
KStereo Earphone Set 01
KEarphone/Microphone 01
KFOMA USB Cable with Charge Function 02*3

KIn-Car Holder 01
KFOMA DC Adapter 01/02
KIn-Car Hands-Free Kit 01*4

KFOMA In-Car Hands-Free Cable 01
KFOMA USB Cable*3

KFOMA Dry Battery Adapter 01
KFOMA Portable Charging Adapter 01/02/03
KEarphone Plug Adapter P001*2

KEarphone/Microphone with Switch P001*5/
P002*5

KStereo Earphone Set P001*5

KRemote controller with microphone F01*2

KEarphone Terminal P001*5

KWireless Earphone Set P01
KWireless Earphone Set 02
KBluetooth Headset F01
KAC adapter for Bluetooth Headset F01
KFOMA AC Adapter 01 for Global use*1

KFOMA Indoor Booster Antenna*6

KFOMA Indoor Booster Antenna (Stand Type)*6

KBone conduction microphone/receiver 01*2/02
KFOMA eco Solar Panel 01*1When using FOMA terminal overseas, use the 
adapter plug that is suitable for use in your travel 
destination. Also, do not charge the battery with a 
transformer for overseas travel.
*2Earphone Plug Adapter for External connector 
terminal 01 is required to connect to F-02D.
*3If you use USB HUB, operations may not be 
performed correctly.
*4FOMA In-Car Hands-Free Cable 01 is required 
to charge F-02D.
*5Earphone Plug Adapter for External connector 
terminal 01 and Earphone Plug Adapter P001 are 
required to connect to F-02D.
*6Use this only in Japan. 
						

							86
Others
Appendix
Menu list

KMenu list for the case Select startup menu is set to Basic menu is described.
KMenus indicated in red can be restored to the default by executing Reset (including the menu whose 
partial sub content menu will  be reset to the default).
ÙMail
Ùi-mode/web
Inbox
Outbox
Unsent messages
Compose new message
Create new Decome-Anime
Decome-Template Deco-mail
Decome-Anime
Compose new SMS
Check new  mail/message
Check new SMS
Receive option
Mail Setting Receive setting
Display
Edit signature
Common phrases/Store word
Check new mail/message 
setting
Reply setting
Auto-reply
Mail group
Blog/Movie/SNS post setting
Address/Spam setting
Auto save setting when editing
SMS settings
Early warning Area Mail 
setting
Mail logs Sent msg. log
Received msg. log
iMenu Search
Bookmark
Screen Memo
Browsing history
Enter URL Enter URL
URL enter history
i-Channel i-Channel list
Ticker display set.
Reset i-Channel
RSS reader
Access shortcuts
i-mode/web setting i-mode Browser Set.
FB settings
Common Settings
Check i-mode setting
Reset i-mode setting
Search engine
Full Browser Home
Smart Browser Smart Browser
Bookmark
Browsing history
URL enter/history
Smart Browser setting 
						

							87
Others
Ùi-αppli
ÙCAMERA/TV/MUSIC
ÙData Box
ÙTool
Software list
i-αppli call logs
i-αppli run information
i-αppli setting Sound effect volume
3D intensity setting 
Software info disp.
Auto-start
i-Widget settings
AUTO-GPS preferred setting
Sort software
Display light time
Brightness
Vibration mode
i-
αppli shortcuts
i-αppli power saver
i-
αppli call DL set
Camera Still image shooting
3D photo
Graffiti picture
Movie shooting
Still image album
Movie play
1Seg Activate 1Seg
Program guide
1Seg image/video
TV timer list
Recording result
TVlink
Channel setting
User setting
MUSIC Player
Music&Video Channel
My picture
MUSIC
Music&Video Channel
i-motion/Movie
Melody
Content package
My document
Kisekae Tool
Machi-chara
Chara-den
1Seg
Home media
Illumination
Other
My collection
Bar code reader
Calculator
Alarm
Infrared/iC communications Receive infrared data Send all infrared data
All iC transmission
Data exchange settings
Schedule
Memo
Voice recorder
HDMI 
						

							88
Others
ÙTEL function
BluetoothAccept registered
Receive data
Send all via BT
List/cnnct/discnct
Register new dev
Bluetooth Power ON/OFF
Bluetooth setting
Wi-Fi Client mode(sub)
Access point(main)
F-LINK/Home media F-LINK
Home media
Guide
Data Security Service Data check/Download Update phonebooks
Update schedule etc
Update images
Update setting information
Detailed setting/Exchanging 
history
microSD
Pedometer/ACT monitor Steps/Activity/Calories info Set Pedometer/Activity 
monitor
e-dictionary
Countdown timer
High-pitched alarm
Business card reader
Address Print
Compass
Common phrases/Store word Common phrases Store word
Download dictionary
Voice quick start
Shabette-KensakuContact DOCOMOůÞ
ïùŠº~	!
Ç