Fujifilm Camera X30 Owners Manual

							MIC-ST1
MIC-ST1
An external microphone for movie recording.
For more information, visit the w ebsite of the country or region of purchase (the new window will
open).
Check the website »
Stereo microphones
002D0020 0032003500310020 002D  
						

							LH-X10
LHF-X20 LC-X30
Lens hoods
Protector filters with hoods
Leather cases
This aluminum lens hood, exclusiv ely for use with the X30/X20/X10, comes with an
adapter ring made of the same material. The adapter ring is als o used when
attaching the φ52 mm filters avail able from third-party suppliers.
This protective filter, exclusive ly for use with the X30/X20/X10 , comes with its own
hood and hood cap.
This leather case, exclusively f or use with the X30, combines p racticality with the
luxury of leather and comes with a shoulder strap made of the s ame material.
Pictures can be taken with the camera still in its case.
For more information, visit the w ebsite of the country or region of purchase (the new window will
open).
Check the website »
Other
002D0020 0032003500320020 002D  
						

							Select the website of your country or region (the new window wi ll open).
Country/RegionCountry/Region
Country/RegionCountry/Region
Country/Region
Website of the country or region of purchase
002D0020 0032003500330020 002D  
						

							For Your Safety
For Your Safety
002D0020 0032003500340020 002D  
						

							Safety precautions are described in the following pdf:
See Also
For Your Safety (PDF:  )
For Your Safety
002D0020 0032003500350020 002D  
						

							Troubleshooting /FAQ
Warning Messages and Displays
Specifications
Links
Restrictions on Camera Settings
Appendix
002D0020 0032003500360020 002D  
						

							Power and Battery
Menus and Displays
Shooting
Playback
Connections /Miscellaneous
ProblemSolution
The camera does
not turn on.
The zoom ring (ON/OFF switch ) is not correctly rotated: Rotate the zoom
ring to  [OFF] and then rotate the zoom ri ng again to the point between
28 and 112.
The battery is exhausted: Charge the battery or  insert a fully-charged
spare battery.
The battery is inserted incorrectly:  Reinsert in the correct orientation.
The battery-chamber c over is not latched: Latch the battery-chamber
cover.
The camera was turned on immediate ly after having been turned off:
Press the shutte r button halfway.
The battery runs
down quickly.
The battery is cold: Warm the battery by placin g it in a pocket or other
warm place and reinsert it in the camera immediately before tak ing a
picture.
There is dirt on the battery terminals:  Clean the terminals with a soft,
dry cloth.
[HIGH PERFORMANCE]  is selected for [POWER MANAGEMENT] :
Select  [POWER SAVE] to reduce the drain on the battery.
 is selected for shooting mode: Select   mode to reduce the drain
on the battery.
[TRACKING]  is selected for [AF MODE] : Select a different AF mode
[C] is selected for focus mode:  Select a different focus mode.
The battery has been charged many times:  The battery has reached the
end of its charging life.  Purchase a new battery.
Troubleshooting/FAQ
002D0020 0032003500370020 002D  
						

							ProblemSolution
The camera turns
off suddenly.
The zoom ring (ON/OFF switch ) is not correctly rotated: Rotate the zoom
ring to  [OFF] and then rotate the zoom ri ng again to the point between
28 and 112.
The battery is exhausted: Charge the battery or  insert a fully-charged
spare battery.
The camera has entered sleep mode:  Press the shutter button halfway.
Problem Solution
Menus and displays are n ot in English. Select [ENGLISH]  for [ ].
Problem Solution
No picture is taken when
the shutter button is
pressed.
Memory is full:  Insert a new memory card or delete pictures.
Memory is not formatted:  Format the memory card or internal
memory.
There is dirt on the memory card contacts:  Clean the contacts
with a soft, dry cloth.
The memory card is damaged:  Insert a new memory card.
The battery is exhausted: Charge the battery or insert a fully-
charged spare battery.
The camera has turned off automatically:  Turn the camera on.
The indicator lamp was orange when you attempted to record a
panorama:  Wait until the indicator lamps turns off.
The LCD monitor goes
dark after shooting. The LCD monitor may darken while
 the flash charges. Wait for the
flash to charge.
The camera does not
focus.
The subject is close to the camera:  Select macro mode.
The subject is far away from the camera:  Cancel macro mode.
The subject is not suited to autofocus: Use focus lock.
Troubleshooting/FAQ
002D0020 0032003500380020 002D  
						

							ProblemSolution
Macro mode is not
available. Choose a different shooting mode.
Intelligent Face Detection
is not available.
Intelligent Face Detec tion is not available in the current shoo ting
mode:  Choose a different shooting mode.
No face is detected.
The subjectʼs face is obscured by sunglasses, a hat, long hair,  or
other objects:  Remove the obstructions.
The subjectʼs face occupies onl y a small area of the frame:
Change the composition so that  the subjectʼs face occupies a
larger area of the frame.
The subjectʼs head is tilted or horizontal:  Ask the subject to hold
their head straight.
The camera is tilted:  Keep the camera level.
The subjectʼs face is poorly lit:  Shoot in bright light.
Wrong subject is
selected. The selected subject is closer t
o the center of the frame than  the
main subject. Recompose the picture or turn face detection off a nd
frame the picture using focus lock.
The flash does not fire.
The flash is not available in  the current shooting mode:  Choose a
different shooting mode.
The camera is in super macro o r continuous shooting mode: Turn
super macro and continuous shooting modes off.
The battery is exhausted:  Charge the battery or insert a fully-
charged spare battery.
The camera is in silent mode:  Turn silent mode off.
The flash is not raised: Raise the flash.
Some flash modes are
not available.
The desired flash mode is not ava ilable in the current shooting
mode:  Choose a different shooting mode.
The camera is in silent mode:  Turn silent mode off.
The flash does not fully
light the subject.
The subject is not i n range of the flash: Position the subject in
range of the flash.
The flash window is obstructed:  Hold the camera correctly.
Fast shutter speed selected: Choose a slower shutter speed.
Troubleshooting/FAQ
002D0020 0032003500390020 002D  
						

							ProblemSolution
Pictures are blurred.
The lens is dirty:  Clean the lens.
The lens is blocked:  Keep objects away from the lens.
 is displayed during shooting an d the focus frame is displayed
in red:  Check focus bef ore shooting.
Pictures are mottled.
A slow shutter speed is sel ected at high temperatures:  This is
normal and does not indicated a malfunction.
The camera has been used conti nuously at high temperatures or
a temperature warning is displayed:  Turn the camera off and wait
for it to cool down.
The viewfinder display is
not clear.
Diopter adjustment is no t adjusted correctly: Slide the diopter
adjustment control up  and down until the viewfinder display is in
sharp focus.
Sounds made by the
camera are recorded with
movies.
The focus mode selector is set to  [C]. Select a different focus
mode.
Intelligent Face D etection is on: Turn Intelligent Face Detection
off.
Problem Solution
Pictures are grainy. The pictures  were taken with a different make or model of camera.
Playback zoom
unavailable. The picture has been saved at  , or is from another make or mode
l
of camera.
No sound in movie
playback.
The camera is in silent mode:  Turn silent mode off.
Playback volume is too low: Adjust playback volume.
The microphone was obstructed:  Hold the camera correctly during
recording.
The speaker is obstructed:  Hold the camera correctly during
playback.
Selected pictures are
not deleted. Some of the pictures selected fo
r deletion are protected. Remove
protection using the device with  which it was originally applied.
Troubleshooting/FAQ
002D0020 0032003600300020 002D