Fujifilm Camera X T1 Owners Manual

							5
Before You Begin
Parts of the Camera
 Camera Displays Camera  Displays
The following types of indicator may be displayed during shooting and playback.  In the description that 
follows, all available indicators are shown for illustrative purposes; the indicators actually displayed vary 
with camera settings.  Note that the LCD monitor and electronic viewfi  nder have diff  erent aspect ratios.
 
■  Shooting: LCD Monitor/Viewfi  nder
LCD monitor Viewfi nder
F100
P2000F5 . 62000.1 0.5 1.0 1.5 2.0 3.0 5.0 10
+1
11
12
2
3 300
F5 . 6P0.1 0.5 1.0 1.5 2.0 3.0 5.0 102000F5.6200
100+1+1100F
A Flash mode ....................................................... 36
B Microphone/remote release ................. 32, 66, 82
C Flash compensation .......................................... 81
D Macro (close-up) mode ..................................... 41
E Self-timer indicator .......................................... 35
F Continuous mode ............................................. 56
G White balance ................................................... 43
H Film simulation ................................................. 42
I Dynamic range ................................................. 79
J Focus frame ...................................................... 67
K Number of available frames ............................ 125
L Image quality and size ...................................... 79
M Temperature warning ..................................... 124
N Control lock ......................................................... 3
O Blur warning ....................................... 4, 119, 122
P IS mode ............................................................ 82
Q Location data download status
R Focus warning .................................... 4, 119, 122
S Silent mode indicator ....................................... 89
T Distance indicator ............................................. 61
U Battery level ..................................................... 17
V Sensitivity ......................................................... 50
W Aperture ............................................... 46, 48, 49
X Shutter speed ....................................... 46, 47, 49
Y Metering ........................................................... 53
Z Shooting mode ................................................. 46
a Focus indicator .................................................. 62
b Exposure compensation/
exposure indicator ...................................... 49, 52
c Histogram ......................................................... 23
d Virtual horizon .................................................. 22
e Depth-of-fi eld preview ..................................... 48 
						

							6
Parts of the Camera
 
■  Shooting: LCD Monitor
20001F5.6
000100
P200
F12
210
+13
3
A Self-timer indicator .......................................... 35
B Flash mode ....................................................... 36
Flash compensation .......................................... 81
C Macro (close-up) mode ..................................... 41
D Metering ........................................................... 53
E Continuous mode ............................................. 56
F Silent mode indicator ....................................... 89
G Number of available frames ............................ 125
H Temperature warning ..................................... 124
I Image quality and size ...................................... 79
J Dynamic range ................................................. 79
K Film simulation ................................................. 42
L White balance ................................................... 43
M Battery level ..................................................... 17
N Sensitivity ......................................................... 50
O Aperture ............................................... 46, 48, 49
P Focus frame/focus point ................................... 45
Q Shutter speed ....................................... 46, 47, 49
R Shooting mode ................................................. 46
S Control lock ......................................................... 3
T Focus mode ...................................................... 61
U Exposure compensation/
exposure indicator ...................................... 49, 52
 
■  Playback:  Viewfi  nder/LCD  Monitor
100-0001
3:2 F
12 / 31 / 2050 10 : 00  AM
YouTube
1 / 10001 / 1000F5 . 6F5 . 6+1/3+1/3200200200200
A Rating ............................................................... 26
B Intelligent face detection indicator ................... 38
C Red-eye removal indicator ................................ 85
D Advanced fi lter ................................................. 58
E Silent mode indicator ....................................... 89
F Gift image ......................................................... 26
G Frame number .................................................. 93
H Playback mode indicator................................... 26
I Mark for upload to ............................................ 86
J Photobook assist indicator ................................ 75
K DPOF print indicator ....................................... 105
L Protected image ............................................... 84 
						

							7
Before You Begin
 Parts of the Lens Parts of the Lens
A Lens hood
B Mounting marks
C Focus ring
D Zoom ring
E Aperture ring
F O.I.S. switch
G Aperture mode switch
H  Lens signal contacts
I Front lens cap
J Rear lens cap
Removing the CapsRemoving the Caps
Remove the caps as shown.
 
Q Lens caps may diff  er from those shown.
Attaching the HoodAttaching the Hood
When attached, lens hoods reduce glare and pro-
tect the front lens element.
LensesLenses
The camera can be used with lenses for the FUJIFILM X-mount. 
						

							8
Lenses
 Lenses with Aperture Rings Lenses with Aperture Rings
At settings other than A, you 
can adjust aperture by rotating 
the lens aperture ring (expo-
sure modes A and M).
Aperture ring
A161185.642.8
A161185.64
  The Aperture Mode Switch  The Aperture Mode Switch
If the lens has an aperture mode switch, aperture can 
be adjusted manually by sliding the switch to  Z and 
rotating the aperture ring.
Aperture ring
Aperture mode switch
Lenses with No Aperture RingsLenses with No Aperture Rings
The method used to adjust aperture can be se-
lected using the e  APERTURE SETTING option 
( P  82) in the shooting menu.  When an option other 
than  AUTO  is selected, aperture can be adjusted 
using the rear command dial.
 
R Aperture control defaults to the rear command dial, 
but can be reassigned to the front command dial 
using the e  COMMAND DIAL SETTING option in 
the setup menu. 
						

							9
Before You Begin
Lenses
 Lenses with O.I.S. Switches Lenses with O.I.S. Switches
If the lens supports optical image stabilization 
(O.I.S.), the image stabilization mode can be cho-
sen in the camera menus.  To activate image sta-
bilization, slide the O.I.S. switch to ON.
O.I.S. switch
Manual Focus LensesManual Focus Lenses
Slide the focus ring to the front for 
autofocus.
For manual focus, slide the focus ring 
to the back and rotate it while check-
ing the results in the camera display. 
The focus distance and depth-of-fi eld 
indicators can be used to assist manual 
focus.  Note that manual focus may not 
be available in all shooting modes.
    The Depth-of-Field Indicator  The Depth-of-Field Indicator
The depth-of-fi eld indicator shows the approximate 
depth of fi  eld (the distance in front of and behind the 
focus point that appears to be in focus).
Distance 
indicator
 
Q The camera does not display the focus distance when 
the lens is in manual focus mode. 
						

							10
First StepsFirst Steps
 Attaching the Strap Attaching the Strap
Attach the strap clips to the camera and then attach the strap.
 1  Open a strap clip.Use the clip attaching tool to open a strap clip, 
making sure that the tool and clip are in the 
orientations shown.
 
Q Keep the tool in a safe place.  You will need it to 
open the strap clips when removing the strap.
 2  Place the strap clip on an eyelet.
Hook the strap eyelet in the clip opening.  Re-
move the tool, using the other hand to keep 
the clip in place.
 3  Pass the clip through the eyelet.
Rotate the clip fully through 
the eyelet until it clicks 
closed.
 4  Attach a protective cover.Place a protective cover over the eyelet as 
shown, with the black side of the cover toward 
the camera.  Repeat Steps 1–4 for the second 
eyelet. 
						

							11
First Steps
Attaching the Strap
 5  Insert the strap.Insert the strap through a protective cover 
and strap clip. 6  Fasten the strap.Fasten the strap as shown.  Repeat Steps 5–6 
for the second eyelet.
 
Q To avoid dropping the camera, be sure the strap is 
correctly secured. 
						

							12
 Attaching a Lens Attaching a Lens
Lenses attach as described below.
 
Q Care is required to prevent dust entering the camera while attaching and removing lenses.
 1  Remove the body and rear caps.
Remove the body cap from the camera and 
the rear cap from the lens.
 
Q Do not touch the camera’s internal parts.
 2  Attach the lens.
Place the lens on mount, keeping the marks 
on the lens and camera aligned, and then ro-
tate the lens until it clicks into place.
 
Q Do not press the lens release button while at-
taching the lens.
    Removing Lenses Removing Lenses
To remove the lens, turn the 
camera off , then press the lens 
release button and rotate the 
lens as shown.
Lens release button
 
Q To prevent dust accumulating on the lens or inside the 
camera, replace the lens caps and camera body cap 
when the lens is not attached.
    Lenses and Other Optional Accessories  Lenses and Other Optional Accessories
The camera can be used with lenses for the FUJIFILM 
X-mount and the other accessories listed from page 
109. 
						

							13
First Steps
 Charging the Battery Charging the Battery
The battery is not charged at shipment.  Before use, charge the battery in the supplied battery charger.
 1  Place the battery in the charger.Place the battery in the supplied battery char-
ger as shown.
Battery charger
Battery
Charge lamp
Arrow
The camera uses an NP-W126 rechargeable bat-
tery.
 
R The supplied AC cord is for use exclusively with 
the supplied battery charger. Do not use the 
supplied charger with other cords or the sup-
plied cord with other devices.
 2  Plug the charger in.
Plug the charger into an indoor power outlet.  
The charging indicator will light.
  The Charging Indicator  The Charging Indicator
The charging indicator shows battery charge sta-
tus as follows:
Charging Charging indicatorindicatorBattery statusBattery statusActionAction
Off Off  
Battery not Battery not inserted.inserted.Insert the battery.Insert the battery.
Battery fully Battery fully charged.charged.Remove the battery.Remove the battery.
OnOnBattery charging.Battery charging.——
BlinksBlinksBattery fault.Battery fault.Unplug the charger Unplug the charger and remove the and remove the battery.battery.
 3  Charge the battery.
Remove the battery when charging is com-
plete.  See the specifi  cations (P 129) for charg-
ing times (note that charging times increase 
at low temperatures).
 
Q Unplug the charger when it is not in use. 
						

							14
 Inserting the Battery Inserting the Battery
After charging the battery, insert the battery as described below.
   1  Open the battery-chamber cover.Slide the battery-chamber latch as shown and 
open the battery-chamber cover.
 
Q Do not open the battery-chamber cover when 
the camera is on.  Failure to observe this precau-
tion could damage image fi les or memory cards.
 
Q Do not use excessive force when handling the 
battery-chamber cover.
   2  Insert the battery.
Using the battery to keep the battery latch 
pressed to one side, insert the battery con-
tacts fi rst in the direction shown by the arrow. 
Confi rm that the battery is securely latched.
Battery latch
Arrow
 
Q Insert the battery in the orientation shown.   Do 
not use force or attempt to insert the battery up-
side down or backwards.  The battery will slide in 
easily in the correct orientation.
   3  Close the battery-chamber cover.    Removing the Battery  Removing the Battery
Before removing the battery, 
turn the camera off   and open 
the battery-chamber cover. 
Press the battery latch to the 
side, and slide the battery out 
of the camera as shown.
Battery latch