Fujifilm Camera X T1 Owners Manual
Have a look at the manual Fujifilm Camera X T1 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 17 Fujifilm manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
115 Technical Notes Caring for the CameraCaring for the Camera To ensure continued enjoyment of the product, observe the following precautions. Storage and UseStorage and Use If the camera will not be used for an extended pe- riod, remove the battery and memory card. Do not store or use the camera in locations that are: • exposed to rain, steam, or smoke • very humid or extremely dusty • exposed to direct sunlight or very high temper-atures, such as in a closed vehicle on a sunny day • extremely cold • subject to strong vibration • exposed to strong magnetic fi elds, such as near a broadcasting antenna, power line, radar emit- ter, motor, transformer, or magnet • in contact with volatile chemicals such as pes- ticides • next to rubber or vinyl products ■ Water and Sand This camera cannot be used under water. Keep the camera against penetration of garbage, mud, sand, dust, water, harmful gas, salt, and so on. Do not place the camera on a wet surface. Make sure the covers (caps) for the battery, card slot and ports are securely closed before use. If the camera is exposed to rain, droplets of water, and so on, dry it thoroughly. ■ Condensation Sudden increases in temperature, such as occur when entering a heated building on a cold day, can cause condensation inside the camera. If this occurs, turn the camera off and wait an hour be- fore turning it on again. If condensation forms on the memory card, remove the card and wait for the condensation to dissipate. TravelingTraveling Keep the camera in your carry-on baggage. Checked baggage may suff er violent shocks that could damage the camera.
116 Cleaning the Image Sensor Cleaning the Image Sensor Multiple photographs marred by spots or blotches in identical locations may indicate the presence of dust on the camera image sensor. Clean the sensor using the V SENSOR CLEANING option in the setup menu ( P 92); if the problem persists, you can clean the sensor manually as described below. Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. Q Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed. R Repeat Steps 1 and 2 as necessary. 3 Replace the body cap or lens.
117 Tro u b l e s ho o t i ng TroubleshootingTroubleshooting Problems and Solutions Problems and Solutions ■■Power and BatteryPower and Battery ProblemProblemSolutionSolution The camera does not The camera does not turn on.turn on. • • The battery is exhaustedThe battery is exhausted: Charge the battery (: Charge the battery (PP 13) or insert a fully-charged spare battery ( 13) or insert a fully-charged spare battery (PP 14). 14).• • The battery is inserted incorrectlyThe battery is inserted incorrectly: Reinsert in the correct orientation (: Reinsert in the correct orientation (PP 14). 14).• • The battery-chamber cover is not latchedThe battery-chamber cover is not latched: Latch the battery-chamber cover (: Latch the battery-chamber cover (PP 14). 14). The monitor does not The monitor does not turn on.turn on.The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button The monitor may not turn on if the camera is turned off and then on again very quickly. Press the shutter button halfway to activate the monitor.halfway to activate the monitor. The battery runs down The battery runs down quickly.quickly. • • The battery is coldThe battery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera : Warm the battery by placing it in a pocket or other warm place and reinsert it in the camera immediately before taking a picture.immediately before taking a picture.• • There is dirt on the battery terminalsThere is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.: Clean the terminals with a soft, dry cloth.• • ONON is selected for is selected for G AUTOFOCUS SETTING > PRE-AFPRE-AF: Turn : Turn PRE-AFPRE-AF off ( off (PP 78). 78).• • The battery has been charged many timesThe battery has been charged many times: The battery has reached the end of its charging life. Purchase a new : The battery has reached the end of its charging life. Purchase a new battery.battery. The camera turns off The camera turns off suddenly.suddenly.The battery is exhaustedThe battery is exhausted: Charge the battery (: Charge the battery (PP 13) or insert a fully-charged spare battery ( 13) or insert a fully-charged spare battery (PP 14). 14). Charging does not start.Charging does not start.Reinsert the battery in the correct orientation and make sure that the charger is plugged in (Reinsert the battery in the correct orientation and make sure that the charger is plugged in (PP 13). 13). Charging is slow.Charging is slow.Charge the battery at room temperature (Charge the battery at room temperature (PP iv). iv). The charging lamp blinks, The charging lamp blinks, but the battery does not but the battery does not charge.charge. • • There is dirt on the battery terminalsThere is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.: Clean the terminals with a soft, dry cloth.• • The battery has been charged many timesThe battery has been charged many times: The battery has reached the end of its charging life. Purchase a new : The battery has reached the end of its charging life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.battery. If the battery still fails to charge, contact your FUJIFILM dealer. ■■Menus and DisplaysMenus and Displays ProblemProblemSolutionSolution Display is not in English.Display is not in English.Select Select ENGLISHENGLISH for for QQ aa ( (PP 89). 89).
118 Problems and Solutions ■■ShootingShooting ProblemProblemSolutionSolution No picture is taken when No picture is taken when the shutter button is the shutter button is pressed.pressed. • • The memory card is fullThe memory card is full: Insert a new memory card or delete pictures (: Insert a new memory card or delete pictures (PP 14, 30). 14, 30).• • The memory card is not formattedThe memory card is not formatted: Format the memory card (: Format the memory card (PP 94). 94).• • There is dirt on the memory card contactsThere is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth.: Clean the contacts with a soft, dry cloth.• • The memory card is damagedThe memory card is damaged: Insert a new memory card (: Insert a new memory card (PP 14). 14).• • The battery is exhaustedThe battery is exhausted: Charge the battery (: Charge the battery (PP 13) or insert a fully-charged spare battery ( 13) or insert a fully-charged spare battery (PP 14). 14).• • The camera has turned off automaticallyThe camera has turned off automatically: Turn the camera on (: Turn the camera on (PP 17). 17).• • The indicator lamp was orange when you attempted to record a panoramaThe indicator lamp was orange when you attempted to record a panorama: Wait until the indicator lamps turns off : Wait until the indicator lamps turns off ((PP 4). 4). Mottling (“noise”) appears Mottling (“noise”) appears in the monitor or view-in the monitor or view-fi nder when the shutter fi nder when the shutter button is pressed halfway.button is pressed halfway. Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result Gain is increased to aid composition when the subject is poorly lit and aperture is stopped down, which may result in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected.in noticeable mottling when images are previewed in the displays. Images taken with the camera are unaff ected. The camera does not focus.The camera does not focus. • • The subject is close to the cameraThe subject is close to the camera: Select macro mode (: Select macro mode (PP 41), if available. If macro mode is unavailable, choose a 41), if available. If macro mode is unavailable, choose a diff erent shooting mode.diff erent shooting mode.• • The subject is far away from the cameraThe subject is far away from the camera: Cancel macro mode (: Cancel macro mode (PP 41). 41).• • The subject is not suited to autofocusThe subject is not suited to autofocus: Use focus lock (: Use focus lock (PP 67) or manual focus ( 67) or manual focus (PP 61). 61). Intelligent Face Detection Intelligent Face Detection is not available.is not available.Intelligent Face Detection is not available in the current shooting modeIntelligent Face Detection is not available in the current shooting mode: Choose a diff erent shooting mode.: Choose a diff erent shooting mode. No face is detected.No face is detected. • • The subject’s face is obscured by sunglasses, a hat, long hair, or other objectsThe subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions.: Remove the obstructions.• • The subject’s face occupies only a small area of the frameThe subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face oc-: Change the composition so that the subject’s face oc-cupies a larger area of the frame (cupies a larger area of the frame (PP 67). 67).• • The subject’s head is tilted or horizontalThe subject’s head is tilted or horizontal: Ask the subject to hold their head straight.: Ask the subject to hold their head straight.• • The camera is tiltedThe camera is tilted: Keep the camera level.: Keep the camera level.• • The subject’s face is poorly litThe subject’s face is poorly lit: Shoot in bright light.: Shoot in bright light. Wrong subject is selected.Wrong subject is selected.The selected subject is closer to the center of the frame than the main subject. Recompose the picture or turn face The selected subject is closer to the center of the frame than the main subject. Recompose the picture or turn face detection off and frame the picture using focus lock (detection off and frame the picture using focus lock (PP 67). 67).
119 Tro u b l e s ho o t i ng Problems and Solutions ProblemProblemSolutionSolution The fl ash does not fi re.The fl ash does not fi re. • • The fl ash can not be used at current settingsThe fl ash can not be used at current settings: See the list of the settings that can be used with the fl ash.: See the list of the settings that can be used with the fl ash.• • The fl ash is loweredThe fl ash is lowered: Raise the fl ash (: Raise the fl ash (PP 36). 36).• • The DRIVE dial is rotated to BKT, CH, or CLThe DRIVE dial is rotated to BKT, CH, or CL: Rotate the dial to : Rotate the dial to SS ( (PP 54, 56). 54, 56).• • The battery is exhaustedThe battery is exhausted: Charge the battery (: Charge the battery (PP 13) or insert a fully-charged spare battery ( 13) or insert a fully-charged spare battery (PP 14). 14).• • The camera is in bracketing or continuous modeThe camera is in bracketing or continuous mode: Select single frame mode.: Select single frame mode.• • The camera is in silent modeThe camera is in silent mode: Turn silent mode off (: Turn silent mode off (PP 89). 89). Some fl ash modes are not Some fl ash modes are not available.available.The camera is in silent mode. Turn silent mode off (The camera is in silent mode. Turn silent mode off (PP 89). 89). The fl ash does not fully The fl ash does not fully light the subject.light the subject. • • The subject is not in range of the fl ashThe subject is not in range of the fl ash: Position the subject in range of the fl ash (: Position the subject in range of the fl ash (PP 127). 127).• • The fl ash window is obstructedThe fl ash window is obstructed: Hold the camera correctly (: Hold the camera correctly (PP 25). 25).• • Shutter speed is faster than Shutter speed is faster than 11//1\b01\b0 s s: Choose a slower shutter speed (: Choose a slower shutter speed (PP 37, 47, 49). 37, 47, 49). Pictures are blurred. Pictures are blurred. • • The lens is dirtyThe lens is dirty: Clean the lens (: Clean the lens (PP xi). xi).• • The lens is blockedThe lens is blocked: Keep objects away from the lens.: Keep objects away from the lens.• • ss is displayed during shooting and the focus frame is displayed in red is displayed during shooting and the focus frame is displayed in red: Check focus before shooting (: Check focus before shooting (PP 25). 25).• • kk is displayed during shooting is displayed during shooting: Use the fl ash or mount the camera on a tripod (: Use the fl ash or mount the camera on a tripod (PP 36). 36). Pictures are mottled.Pictures are mottled.• • Shutter speed is slow and the ambient temperature is highShutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction.: This is normal and does not indicate a malfunction.• • The camera has been used continuously at high temperatures or a temperature warning is displayedThe camera has been used continuously at high temperatures or a temperature warning is displayed: Turn the cam-: Turn the cam-era off and wait for it to cool down.era off and wait for it to cool down.
120 Problems and Solutions ■■PlaybackPlayback ProblemProblemSolutionSolution Pictures are grainy.Pictures are grainy.The pictures were taken with a diff erent make or model of camera.The pictures were taken with a diff erent make or model of camera. Playback zoom is unavail-Playback zoom is unavail-able.able.The pictures were created using The pictures were created using OO RESIZERESIZE or with a diff erent make or model of camera. or with a diff erent make or model of camera. No sound in movie No sound in movie playback.playback. • • Playback volume is too lowPlayback volume is too low: Adjust playback volume (: Adjust playback volume (PP 90). 90).• • The microphone was obstructedThe microphone was obstructed: Hold the camera correctly during recording (: Hold the camera correctly during recording (PP 2, 31). 2, 31).• • The speaker is obstructedThe speaker is obstructed: Hold the camera correctly during playback (: Hold the camera correctly during playback (PP 2, 33). 2, 33).• • The camera is in silent modeThe camera is in silent mode: Turn silent mode off (: Turn silent mode off (PP 89). 89). Selected pictures are not Selected pictures are not deleted.deleted.Some of the pictures selected for deletion are protected. Remove protection using the device with which it was Some of the pictures selected for deletion are protected. Remove protection using the device with which it was originally applied (originally applied (PP 84). 84). File numbering is unex-File numbering is unex-pectedly reset.pectedly reset.The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-The battery-chamber cover was opened while the camera was on. Turn the camera off before opening the bat-tery-chamber cover (tery-chamber cover (PP 14, 17). 14, 17). ■■Connections/MiscellaneousConnections/Miscellaneous For additional information on troubleshooting wireless connections, visit: http://faq.fujifilm.com/digitalcamera/faq_product.html?pid=F ProblemProblemSolutionSolution Problem connecting or Problem connecting or uploading pictures to uploading pictures to smartphone.smartphone. • • The smartphone is too far awayThe smartphone is too far away: Move the devices closer.: Move the devices closer.• • Nearby devices are causing radio interferenceNearby devices are causing radio interference: Move the camera and smartphone away from microwave ovens or : Move the camera and smartphone away from microwave ovens or cordless phones.cordless phones. Can not upload images.Can not upload images. • • The smartphone is connected to another deviceThe smartphone is connected to another device: The smartphone and camera can connect to only one device at a : The smartphone and camera can connect to only one device at a time. End the connection and try again.time. End the connection and try again.• • There are several smartphones in the vicinityThere are several smartphones in the vicinity: Try connecting again. The presence of multiple smartphones can : Try connecting again. The presence of multiple smartphones can make connection diffi cult.make connection diffi cult.• • The current image is a movie or was created on another device and can not be uploaded to a smartphone.The current image is a movie or was created on another device and can not be uploaded to a smartphone. Smartphone will not Smartphone will not display pictures.display pictures.Select Select ONON for for rr WIRELESS SETTINGWIRELESS SETTING > > RESIZE IMAGE FOR SMARTPHONERESIZE IMAGE FOR SMARTPHONE HH. Selecting . Selecting OFFOFF increases increases upload times for larger images; in addition, some phones may not display images over a certain size.upload times for larger images; in addition, some phones may not display images over a certain size.
121 Tro u b l e s ho o t i ng Problems and Solutions ProblemProblemSolutionSolution No picture or sound on TV.No picture or sound on TV. • • The camera is not properly connectedThe camera is not properly connected: Connect the camera properly (: Connect the camera properly (PP 108). Note that once the camera is con-). Note that once the camera is con-nected, pictures will be displayed on the TV instead of in the camera monitor.nected, pictures will be displayed on the TV instead of in the camera monitor.• • Input on the television is set to “TV”Input on the television is set to “TV”: Set input to “HDMI”.: Set input to “HDMI”.• • The volume on the TV is too lowThe volume on the TV is too low: Use the controls on the television to adjust the volume.: Use the controls on the television to adjust the volume. The computer does not The computer does not recognize the camera.recognize the camera.Be sure the camera and computer are correctly connected (Be sure the camera and computer are correctly connected (PP 101).). Can not transfer RAW or Can not transfer RAW or JPEG fi les to computer.JPEG fi les to computer.Use the bundled software to transfer pictures (Use the bundled software to transfer pictures (PP 98).). Pictures can not be Pictures can not be printed.printed.• • The camera is not properly connectedThe camera is not properly connected: Connect the camera correctly (: Connect the camera correctly (PP 103).).• • The printer is off The printer is off : Turn the printer on.: Turn the printer on. Only one copy is printed/Only one copy is printed/the date is not printed.the date is not printed.The printer is not PictBridge compatible.The printer is not PictBridge compatible. The camera is unrespon-The camera is unrespon-sive.sive.• • Temporary camera malfunctionTemporary camera malfunction: Remove and reinsert the battery (: Remove and reinsert the battery (PP 14). 14).• • The battery is exhaustedThe battery is exhausted: Charge the battery (: Charge the battery (PP 13) or insert a fully-charged spare battery ( 13) or insert a fully-charged spare battery (PP 14). 14). The camera does not func-The camera does not func-tion as expected.tion as expected.Remove and reinsert the battery (Remove and reinsert the battery (PP 14). If the problem persists, contact your FUJIFILM dealer. 14). If the problem persists, contact your FUJIFILM dealer. No sound.No sound.Turn silent mode off (Turn silent mode off (PP 89). 89).
122 Warning Messages and Displays Warning Messages and Displays The following warnings appear in the display. WarningWarningDescriptionDescription BB (red) (red)Low battery. Charge the battery (Low battery. Charge the battery (PP 13) or insert a fully-charged spare battery ( 13) or insert a fully-charged spare battery (PP 14). 14). AA (blinks red) (blinks red)Battery exhausted. Charge the battery (Battery exhausted. Charge the battery (PP 13) or insert a fully-charged spare battery ( 13) or insert a fully-charged spare battery (PP 14). 14). k kSlow shutter speed. Pictures may be blurred; use the fl ash or a tripod.Slow shutter speed. Pictures may be blurred; use the fl ash or a tripod. s s(displayed in red with (displayed in red with red focus frame)red focus frame) The camera can not focus. Try one of the following solutions:The camera can not focus. Try one of the following solutions:• • Use focus lock to focus on another subject at the same distance, then recompose the picture (Use focus lock to focus on another subject at the same distance, then recompose the picture (PP 67). 67).• • Use macro mode to focus when taking close-ups.Use macro mode to focus when taking close-ups. Aperture or shutter speed Aperture or shutter speed displayed in reddisplayed in redThe subject is too bright or too dark and the picture will be over- or under-exposed. Use the fl ash for additional The subject is too bright or too dark and the picture will be over- or under-exposed. Use the fl ash for additional lighting when taking photographs of poorly-lit subjects.lighting when taking photographs of poorly-lit subjects. FOCUS ERRORFOCUS ERROR Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.Camera malfunction. Turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.TURN OFF THE CAMERA TURN OFF THE CAMERA AND TURN ON AGAINAND TURN ON AGAIN LENS CONTROL ERRORLENS CONTROL ERROR LENS ERRORLENS ERRORTurn the camera off , remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera Turn the camera off , remove the lens, and clean the mounting surfaces, then replace the lens and turn the camera on. If the problem persists, contact a FUJIFILM dealer.on. If the problem persists, contact a FUJIFILM dealer. BUSYBUSYThe memory card is incorrectly formatted. Use the camera to format the card (The memory card is incorrectly formatted. Use the camera to format the card (PP 94). 94). CARD NOT INITIALIZEDCARD NOT INITIALIZED • • The memory card is not formatted or the memory card has been formatted in a computer or other deviceThe memory card is not formatted or the memory card has been formatted in a computer or other device: Format the : Format the memory card using the memory card using the KK FORMATFORMAT option in the camera setup menu ( option in the camera setup menu (PP 94). 94).• • The memory card contacts require cleaningThe memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, : Clean the contacts with a soft, dry cloth. If the message is repeated, format the card (format the card (PP 94). If the message persists, replace the card. 94). If the message persists, replace the card.• • Camera malfunctionCamera malfunction: Contact a FUJIFILM dealer.: Contact a FUJIFILM dealer. PROTECTED CARDPROTECTED CARDThe memory card is locked. Unlock the card.The memory card is locked. Unlock the card.
123 Tro u b l e s ho o t i ng Warning Messages and Display WarningWarningDescriptionDescription CARD ERRORCARD ERROR • • The memory card is not formatted for use in the cameraThe memory card is not formatted for use in the camera: Format the card (: Format the card (PP 94). 94).• • The memory card contacts require cleaning or the memory card is damagedThe memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry : Clean the contacts with a soft, dry cloth. If the message is repeated, format the card (cloth. If the message is repeated, format the card (PP 94). If the message persists, replace the card. 94). If the message persists, replace the card.• • Incompatible memory cardIncompatible memory card: Use a compatible card (: Use a compatible card (PP 16). 16).• • Camera malfunctionCamera malfunction: Contact a FUJIFILM dealer.: Contact a FUJIFILM dealer. bb MEMORY FULL MEMORY FULLThe memory card is full and pictures can not be recorded. Delete pictures (The memory card is full and pictures can not be recorded. Delete pictures (PP 30) or insert a memory card with 30) or insert a memory card with more free space (more free space (PP 14). 14). NO CARDNO CARDThe shutter can only be released when a memory card is inserted. Insert a memory card.The shutter can only be released when a memory card is inserted. Insert a memory card. WRITE ERRORWRITE ERROR • • Memory card error or connection errorMemory card error or connection error: Reinsert the card or turn the camera off and then on again. If the message : Reinsert the card or turn the camera off and then on again. If the message persists, contact a FUJIFILM dealer.persists, contact a FUJIFILM dealer.• • Not enough memory remaining to record additional picturesNot enough memory remaining to record additional pictures: Delete pictures (: Delete pictures (PP 30) or insert a memory card with 30) or insert a memory card with more free space (more free space (PP 14). 14).• • The memory card is not formattedThe memory card is not formatted: Format the memory card (: Format the memory card (PP 94). 94). READ ERRORREAD ERROR • • The fi le is corrupt or was not created with the cameraThe fi le is corrupt or was not created with the camera: The fi le can not be viewed.: The fi le can not be viewed.• • The memory card contacts require cleaningThe memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message is repeated, : Clean the contacts with a soft, dry cloth. If the message is repeated, format the card (format the card (PP 94). If the message persists, replace the card. 94). If the message persists, replace the card.• • Camera malfunctionCamera malfunction: Contact a FUJIFILM dealer.: Contact a FUJIFILM dealer. FRAME NO. FULL FRAME NO. FULL The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and The camera has run out of frame numbers (current frame number is 999-9999). Format the memory card and select select RENEWRENEW for for FRAME NO.FRAME NO..Take a picture to reset frame numbering to 100-0001, then select .Take a picture to reset frame numbering to 100-0001, then select CONTINU-CONTINU-OUSOUS for for FRAME NO.FRAME NO... TOO MANY FRAMESTOO MANY FRAMES• • A search has returned more than 30,000 resultsA search has returned more than 30,000 results: Choose a search that returns fewer results.: Choose a search that returns fewer results.• • More than 999 images are selected for deletionMore than 999 images are selected for deletion: Choose fewer images.: Choose fewer images.
124 Warning Messages and Display WarningWarningDescriptionDescription PROTECTED FRAMEPROTECTED FRAMEAn attempt was made to delete or rotate to a protected picture. Remove protection and try again (An attempt was made to delete or rotate to a protected picture. Remove protection and try again (PP 84). 84). CAN NOT CROPCAN NOT CROPThe picture is damaged or was not created with the camera.The picture is damaged or was not created with the camera. mm CANNOT EXECUTE CANNOT EXECUTERed-eye removal can not be applied to pictures created with other devices.Red-eye removal can not be applied to pictures created with other devices. FF CANNOT EXECUTE CANNOT EXECUTERed-eye removal can not be applied to movies.Red-eye removal can not be applied to movies. CAN NOT ROTATECAN NOT ROTATEThe selected picture can not be rotated.The selected picture can not be rotated. FF CAN NOT ROTATE CAN NOT ROTATEMovies can not be rotated.Movies can not be rotated. DPOF FILE ERRORDPOF FILE ERRORThe DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-The DPOF print order on the current memory card contains more than 999 images. Copy the pictures to a com-puter and create a new print order.puter and create a new print order. CAN NOT SET DPOFCAN NOT SET DPOFThe picture can not be printed using DPOF.The picture can not be printed using DPOF. FF CAN NOT SET DPOF CAN NOT SET DPOFMovies can not be printed using DPOF.Movies can not be printed using DPOF. COMMUNICATION ERRORCOMMUNICATION ERRORA connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm A connection error occurred while pictures were being printed or copied to a computer or other device. Confi rm that the device is turned on and that the USB cable is connected.that the device is turned on and that the USB cable is connected. PRINTER ERRORPRINTER ERRORPrinter out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing, Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To resume printing, turn the printer off and then turn it back on.turn the printer off and then turn it back on. PRINTER ERRORPRINTER ERRORRESUME?RESUME? Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If printing does not resume automatically, press resume automatically, press MENU/OKMENU/OK to resume. to resume. CANNOT BE PRINTEDCANNOT BE PRINTED An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-An attempt was made to print a movie, a picture not created with the camera, or a picture in a format not sup-ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if ported by the printer. Movies, RAW images, and some pictures created with other devices can not be printed; if the picture is a still picture created with the camera, check the printer manual to confi rm that the printer supports the picture is a still picture created with the camera, check the pr inter manual to confi rm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed.the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can not be printed. p pTurn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.Turn the camera off and wait for it to cool. Mottling may increase in pictures taken when this warning is displayed.