Fujifilm Camera X T1 Owners Manual

							105
Connections
Printing Pictures via USB
  During Printing During Printing
The message shown at right is 
displayed during printing.  Press 
DISP/BACK to cancel before all 
pictures are printed (depending 
on the printer, printing may end 
before the current picture has 
printed).
If printing is interrupted, turn the camera off    and 
then on again.
  Disconnecting the Camera  Disconnecting the Camera
Confi  rm that the above message is not displayed and 
turn the camera off .  Disconnect the USB cable.
 Creating a DPOF Print Order Creating a DPOF Print Order
The  K PRINT ORDER (DPOF) option in the play-
back menu can be used to create a digital “print 
order” for PictBridge-compatible printers or de-
vices that support DPOF.
  DPOF DPOF
DPOF (Digital  Print Order  Format) is stan-
dard that allows pictures to be printed from 
“print orders” stored on the memory card.  
The information in the order includes the 
pictures to be printed and the number of copies of 
each picture.
CANCEL
PRINTING 
						

							106
Printing Pictures via USB
 
■ WITH DATE s/ WITHOUT  DATE
To modify the DPOF print order, select K  PRINT 
ORDER (DPOF) in the playback menu and press 
the selector up or down to highlight WITH 
DATE  s or WITHOUT DATE.
SLIDE SHOW PLAYBACK MENU
PHOTOBOOK ASSIST
MARK FOR UPLOAD TO
IMAGE SEARCH
PRINT ORDER  (
DPOF )
PC AUTO SAVERED EYE REMOVALY
WITH DATE sWITHOUT DATE
RESET ALL
WITH DATE s: Print date of recording 
on pictures.
WITHOUT DATE: Print pictures without 
date.
Press MENU/OK and follow the steps below.
 1  Press the selector left or right to dis-
play a picture you wish to include in 
or remove from the print order.
 2 Press the selector up or down to choose the number of copies (up 
to 99).  To remove a picture from the 
order, press the selector down until 
the number of copies is 0.
01
PRINT ORDER  (
DPOF )
SHEETS SET
FRAMEDPOF: 00001Total number of prints
Number of copies
 3 Repeat steps 1–2 to complete the 
print order.  Press MENU/OK to save 
the print order when settings are 
complete, or DISP/BACK to exit with-
out changing the print order.
 4 The total number of prints is dis-played in the monitor.  Press MENU/OK 
to exit.
The pictures in the current 
print order are indicated by a 
u icon during playback. 
						

							107
Connections
Printing Pictures via USB
 
■ RESET ALL
To cancel the current print 
order, select RESET ALL for 
K  PRINT ORDER (DPOF) .  The 
confi rmation shown at right 
will be displayed; press  MENU/OK 
to remove all pictures from the 
order.
 
R Print orders can contain a maximum of 999 pictures.
 
R If a memory card is inserted 
containing a print order cre-
ated by another camera, the 
message shown at right will 
be displayed.  Pressing MENU/OK 
cancels the print order; a new 
print order must be created as 
described above.
CANCELYES
RESET DPOF OK?
NOYES
RESET DPOF OK? 
						

							108
 Viewing Pictures on TV Viewing Pictures on TV
To show pictures to a group, connect the camera to a TV using an HDMI cable (available separately 
from third-party suppliers; note that the TV can only be used for playback, not shooting).
 1  Turn the camera off .
 2  Connect the cable as shown below.
Insert into 
HDMI mini connector
Insert into 
HDMI connector
 
Q Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
 
R Be sure the connectors are fully inserted.
 3 Tune the television to the HDMI input channel.  See the documentation supplied with the televi-
sion for details.
 4 Turn the camera on and press a button.  The camera monitor turns off   and pictures and movies 
are played back on the TV.  Note that the camera volume controls have no eff  ect on sounds played 
on the TV; use the television volume controls to adjust the volume.
 
R The USB cable can not be used while an HDMI cable is connected.
 
R Some televisions may briefl y display a black screen when movie playback begins. 
						

							109
Technical Notes
Technical NotesTechnical Notes
 Optional Accessories Optional  Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
 Accessories from FUJIFILM Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM.  For the latest information on the accesso-
ries available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.com/
products/digital_cameras/index.html.
Rechargeable Li-ion batteriesRechargeable Li-ion batteries
NP-W126 : Additional large-capacity NP-W126 rechargeable batteries can be purchased as required.
Battery chargersBattery chargers
BC-W126 : Replacement battery chargers can be purchased as required.  At+20 °C/+68 °F, the BC-W126 charg-
es an NP-W126 in about 150 minutes.
Remote releasesRemote releases
RR-90: Use to reduce camera shake or keep the shutter open during a time exposure.
Stereo microphonesStereo microphonesMIC-ST1: An external microphone for movie recording. 
						

							110
Optional Accessories
 FUJINON lenses FUJINON  lensesXF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
 Shoe-mounted fl  ash units Shoe-mounted fl  ash unitsEF-20: This clip-on fl  ash unit (powered by two AA batteries) has a Guide Number of 20/65 (ISO 100, m/ft.) and 
supports TTL fl ash control.  The fl ash head can be rotated upwards 90° for bounce lighting.
EF-42: This clip-on fl ash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) 
and supports TTL fl ash control and auto power zoom in the range 24–105 mm (35 mm format equivalent).  
The fl ash head can be rotated 90° up, 180° left, or 120° right for bounce lighting.
EF-X20: This clip-on fl ash unit has a Guide Number of 20/65 (ISO 100, m/ft.).
Mount adaptersMount adaptersFUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Protector fi  ltersProtector fi  ltersPRF-39/PRF-49S/PRF-52/PRF-58/PRF-62/PRF-72: Use to protect the lens.
GripsGrips
MHG-XT : Features an improved grip.  Batteries and memory cards can be removed with the grip in place, and the grip is equipped with a rail for quick-shoe camera mounts.  The tripod mount can be aligned with the lens optical axis.
Leather casesLeather cases
BLC-XT1: This case combines practicality with the luxury of leather and comes with a shoulder strap made of the same material, 
as well as a cloth that can be used to wrap the camera before putting it in the case and on other occasions.  Pictures can be 
taken and batteries inserted or removed with the camera still in its case. 
						

							111
Technical Notes
Optional Accessories
Front lens capsFront lens capsFLCP-39/FLCP-52/FLCP-58/FLCP-62/FLCP-72: Protect the front lens element when the lens is not in use.
Rear lens capsRear lens capsRLCP-001: Protect the rear lens element when the lens is not attached to the camera.
Body capsBody caps
BCP-001: Cover the camera lens mount when no lens is attached.
Battery gripsBattery gripsVG-XT1 : This grip accommodates an extra battery for improved endurance and makes it easier to hold the 
camera rotated 90 ° to frame pictures in “tall” (portrait) orientation. The tripod mount can be aligned with 
the lens optical axis.
AC power adaptersAC power adapters
AC-9V (requires CP-W126 DC coupler and VG-XT1 vertical battery grip) : Use for extended shooting and playback or when copying pictures to a 
computer.
DC couplersDC couplers
CP-W126 : Connect the AC-9V to the VG-XT1. 
						

							112
Optional Accessories
 Connecting the Camera to Other Devices Connecting the Camera to Other Devices
 ■Remote Shutter Releases
RR-90 remote release *
 ■Printing
PictBridge-
compatible 
printer
 †
Printer †
USB cable †
 ■Computer Related
Computer †
USB cable †
X-T1
 ■External Microphones
MIC-ST1 stereo microphone *
 ■ Flash  Photography
EF-20 shoe-
mounted fl ash *EF-42 shoe-
mounted fl ash *EF-X20 shoe-
mounted fl ash *
 ■Lenses
XF-series lenses *XC-series lenses *
 ■M Mount Adapters
FUJIFILM M mount adapter *
 ■Audio/Visual
HDTV
 †
HDMI cable †
 ■Battery Grips
VG-XT1
vertical battery grip *
SD/SDHC/SDXC 
memory card †
* Available separately from FUJIFILM.
† Available separately from third-party suppliers.  USB and  HDMI cables must be no more than 1.5 m (4.9 ft.) long. 
						

							113
Technical Notes
 The Vertical Battery Grip The Vertical Battery Grip
The optional VG-XT1 vertical battery grip accommodates an extra battery for improved endurance and 
makes it easier to hold the camera rotated 90 ° to frame pictures in “tall” (portrait) orientation.
Parts of the VG-XT1Parts of the VG-XT1
The shooting controls on the VG-XT1 perform the same functions as the controls on the camera.
A Shutter button
B Control lock
C Front command dial
D Lock screw knob
E Eyelet for camera strap
F Tripod socket
G Connector
H Lock screw
I Compartment for connector cover supplied with camera
J FOCUS ASSIST button
K Rear command dial
L AE-L button
M AF-L button
N DC coupler connector cover
O Battery-chamber cover latch
P Battery-chamber cover 
						

							114
The Vertical Battery Grip
Attaching the VG-XT1Attaching the VG-XT1
The VG-XT1 attaches as shown below.
 1 Remove the vertical battery grip connector cover from the camera and place it in the grip 
connector cover compartment.
 2 Align the connectors on the grip with the matching connectors on the camera.
 3  Rotate the lock screw knob to tighten the lock screw.
Inserting a BatteryInserting a Battery
Insert a battery as shown below.
 1 Unlatch and open the bat-tery-chamber cover.
 2  Insert the battery.
 3  Close and latch the battery-chamber cover.
 
Q The battery in the grip is used before the battery in 
the camera.  The camera automatically switches to 
the camera battery when the battery in the grip is 
exhausted.  Movie recording and bulb photography 
will end when the camera switches batteries.  When 
the battery in the grip is exhausted, remove and 
charge the battery or replace it with a fully-charged 
spare battery.
 
R The camera shows the levels of 
both batteries, with the camera 
battery level listed fi rst.
P  AC Power Adapters  AC Power Adapters
The grip can be used with an optional AC-9V AC 
power adapter and CP-W126 DC coupler.