Home > Ford > Automobile > Ford Fusion 17 Owners Manual

Ford Fusion 17 Owners Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Ford Fusion 17 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 41 Ford manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 528
    							CHANGING THE ENGINE AIR
    FILTER
    WARNING
    To reduce the risk of vehicle damage
    and/or personal burn injuries do not
    start your engine with the air cleaner
    removed and do not remove it while the
    engine is running. When changing the air filter element, use
    only the air filter element listed.  See
    Capacities and Specifications (page
    321).
    For EcoBoost equipped vehicles: When
    servicing the air cleaner, it is important that
    no foreign material enter the air induction
    system. The engine and turbocharger are
    susceptible to damage from even small
    particles.
    Change the air filter element at the proper
    interval.  See 
    Scheduled Maintenance
    (page 477).
    Note: Failure to use the correct air filter
    element may result in severe engine
    damage. The customer warranty may be
    void for any damage to the engine if the
    correct air filter element is not used.
    EcoBoost Engines 2.5L Engine
    1.
    Release the clamps that secure the air
    filter housing cover.
    2. Carefully lift the air filter housing cover.
    3. Remove the air filter element from the
    air filter housing.
    4. Wipe any dirt or debris from the air filter
    housing and cover to make sure no dirt
    gets in the engine and to make sure you
    have a good seal.
    5. Install a new air filter element. Be careful not to crimp the filter element
    edges between the air filter housing
    and cover. This could cause filter
    damage and allow unfiltered air to
    enter the engine if not properly seated.
    6. Install the air filter housing cover.
    7. Engage the clamps to secure the air filter housing cover to the air filter
    housing.
    278
    Fusion (CC7) Canada/United States of America, enUSA, First Printing MaintenanceE144365 E146047  
    						
    							GENERAL INFORMATION
    Your Ford or Lincoln authorized dealer has
    many quality products available to clean
    your vehicle and protect its finishes.
    CLEANING PRODUCTS
    For best results, use the following products
    or products of equivalent quality:
    Materials Specification
    Name
    -
    Motorcraft Bug and Tar Remover
    ZC-42
    -
    Motorcraft Custom Bright Metal Cleaner
    ZC-15
    ESR-M14P4-A
    Motorcraft® Detail Wash
    ZC-3-A
    -
    Motorcraft Engine Shampoo and Degreaser (U.S.)
    ZC-20 (U.S.)
    -
    Engine Shampoo
    -
    Motorcraft Leather and Vinyl Cleaner
    ZC-56
    -
    Multi-Purpose Cleaner
    WSS-M14P19-A
    Motorcraft® Premium Windshield Wash Concentrate with
    Bitterant (U.S.)
    ZC-32-B2 (U.S.)
    -
    Professional Strength Carpet and Upholstery Cleaner
    ZC-54
    -
    Motorcraft Spot and Stain Remover (U.S.)
    ZC-14 (U.S.)
    ESR-M14P5-A
    Motorcraft® Ultra-Clear Spray Glass Cleaner (U.S.)
    ZC-23 (U.S.)
    -
    Motorcraft® Wheel and Tire Cleaner
    ZC-37-A
    CLEANING THE EXTERIOR
    Wash your vehicle regularly with cool or
    lukewarm water and a neutral pH
    shampoo, we recommend Motorcraft
    Detail Wash. •
    Never use strong household detergents
    or soap, for example dish washing or
    laundry liquid. These products can
    discolor and spot painted surfaces.
    • Never wash your vehicle when it is hot
    to the touch, or during strong or direct
    sunlight.
    • Dry your vehicle with a chamois or soft
    terry cloth towel to eliminate water
    spotting.
    279
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Vehicle Care 
    						
    							•
    Immediately remove fuel spillages, bird
    droppings, insect deposits and road tar.
    These may cause damage to your
    vehicle ’s paintwork or trim over time.
    We recommend Motorcraft Bug and
    Tar Remover.
    • Remove any exterior accessories, for
    example antennas, before entering a
    car wash.
    Note: Suntan lotions and insect repellents
    can damage painted surfaces. If these
    substances come in contact with your
    vehicle, wash the affected area as soon as
    possible.
    Exterior Chrome Parts
    • Apply a high quality-cleaning product
    to bumpers and other chrome parts.
    Follow the manufacturer ’s instructions.
    We recommend Motorcraft Custom
    Bright Metal Cleaner.
    • Do not apply the cleaning product to
    hot surfaces. Do not leave the cleaning
    product on chrome surfaces longer
    than the time recommended.
    • Using other non-recommended
    cleaners can result in severe and
    permanent cosmetic damage.
    Note: Never use abrasive materials, for
    example steel wool or plastic pads as they
    can scratch the chrome surface.
    Note: Do not use chrome cleaner, metal
    cleaner or polish on wheels or wheel covers.
    Exterior Plastic Parts
    For routine cleaning we recommend
    Motorcraft Detail Wash. If tar or grease
    spots are present, we recommend
    Motorcraft Bug and Tar Remover.
    Stripes or Graphics (If Equipped)
    Hand washing your vehicle is preferred
    however, pressure washing may be used
    under the following conditions: •
    Do not use water pressure higher than
    2,000 psi (14,000 kPa)
    .
    • Do not use water hotter than 
    179°F
    (82°C).
    • Use a spray with a 
    40° wide spray
    angle pattern.
    • Keep the nozzle at a 
    12 in (305 mm)
    distance and 90° angle to your
    vehicle's surface.
    Note: Holding the pressure washer nozzle
    at an angle to the vehicle's surface may
    damage graphics and cause the edges to
    peel away from the vehicle's surface.
    Underbody
    Flush the complete underside of your
    vehicle frequently. Keep body and door
    drain holes free of debris or foreign
    material.
    Under Hood
    For removing black rubber marks from
    under the hood we recommend Motorcraft
    Wheel and Tire Cleaner or Motorcraft Bug
    and Tar Remover.
    WAXING
    Regular waxing is necessary to protect your
    car's paint from the elements. We
    recommend that you wash and wax the
    painted surface once or twice a year.
    When washing and waxing, park your
    vehicle in a shaded area out of direct
    sunlight. Always wash your vehicle before
    applying wax.
    • Use a quality wax that does not contain
    abrasives.
    • Follow the manufacturer ’s instructions
    to apply and remove the wax.
    • Apply a small amount of wax in a
    back-and-forth motion, not in circles.
    280
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Vehicle Care 
    						
    							•
    Do not allow wax to come in contact
    with any non-body (low-gloss black)
    colored trim. The wax will discolor or
    stain the parts over time.
    •Roof racks.
    • Bumpers.
    • Grained door handles.
    • Side moldings.
    • Mirror housings.
    • Windshield cowl area.
    • Do not apply wax to glass areas.
    • After waxing, your car's paint should
    feel smooth, and be free of streaks and
    smudges.
    CLEANING THE ENGINE
    Engines are more efficient when they are
    clean because grease and dirt buildup keep
    the engine warmer than normal.
    When washing:
    • Take care when using a power washer
    to clean the engine. The high-pressure
    fluid could penetrate the sealed parts
    and cause damage.
    • Do not spray a hot engine with cold
    water to avoid cracking the engine
    block or other engine components.
    • Spray Motorcraft Engine Shampoo and
    Degreaser on all parts that require
    cleaning and pressure rinse clean. In
    Canada, use Motorcraft Engine
    Shampoo.
    • Never wash or rinse the engine while it
    is hot or running; water in the running
    engine may cause internal damage. •
    Never wash or rinse any ignition coil,
    spark plug wire or spark plug well, or
    the area in and around these locations.
    • Cover the battery, power distribution
    box, and air filter assembly to prevent
    water damage when cleaning the
    engine.
    CLEANING THE WINDOWS AND
    WIPER BLADES
    Car wash chemicals and environmental
    fallout can result in windshield and wiper
    blade contamination. Dirty windshield and
    wipers will result in poor windshield wiper
    operation. Keep the windshield and wiper
    blades clean to maintain windshield wiper
    performance.
    To clean the windshield and wiper blades:
    • Clean the windshield with a
    non-abrasive glass cleaner. When
    cleaning the interior of the windshield,
    avoid getting any glass cleaner on the
    instrument panel or door panels. Wipe
    any glass cleaner off these surfaces
    immediately.
    • For windshields contaminated with
    tree sap, chemicals, wax or bugs, clean
    the entire windshield using steel wool
    (no greater than 0000 grade) in a
    circular motion and rinse with water.
    • Clean the wiper blades with isopropyl
    rubbing alcohol or windshield washer
    concentrate.
    Note:  Do not use razor blades or other
    sharp objects to clean or remove decals
    from the inside of the heated rear window.
    The vehicle warranty does not cover
    damage caused to the heated rear window
    grid lines.
    281
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Vehicle Care 
    						
    							CLEANING THE INTERIOR
    WARNINGS
    Do not use cleaning solvents, bleach
    or dye on the vehicle
    ’s safety belts,
    as these actions may weaken the
    belt webbing. On vehicles equipped with
    seat-mounted airbags, do not use
    chemical solvents or strong
    detergents. Such products could
    contaminate the side airbag system and
    affect performance of the side airbag in a
    collision. For fabric, carpets, cloth seats, safety belts
    and seats equipped with side airbags:
    •
    Remove dust and loose dirt with a
    vacuum cleaner.
    • Remove light stains and soil with
    Motorcraft Professional Strength
    Carpet & Upholstery Cleaner.
    • If grease or tar is present on the
    material, spot-clean the area first with
    Motorcraft Spot and Stain Remover. In
    Canada, use Motorcraft Multi-Purpose
    Cleaner.
    • If a ring forms on the fabric after spot
    cleaning, clean the entire area
    immediately (but do not oversaturate)
    or the ring will set.
    • Do not use household cleaning
    products or glass cleaners, which can
    stain and discolor the fabric and affect
    the flame retardant abilities of the seat
    materials. CLEANING THE INSTRUMENT
    PANEL AND INSTRUMENT
    CLUSTER LENS WARNING
    Do not use chemical solvents or
    strong detergents when cleaning the
    steering wheel or instrument panel
    to avoid contamination of the airbag
    system. Note:
    Follow the same procedure as
    cleaning leather seats for cleaning leather
    instrument panels and leather interior trim
    surfaces.  See Cleaning Leather Seats
    (page 283).
    Clean the instrument panel and cluster
    lens with a clean, damp and soft cloth,
    then use a clean, dry and soft cloth to dry
    these areas.
    • Avoid cleaners or polishes that increase
    the gloss of the upper portion of the
    instrument panel. The dull finish in this
    area helps protect you from
    undesirable windshield reflection.
    • Do not use any household cleaning
    products or glass cleaners as these
    may damage the finish of the
    instrument panel, interior trim and
    cluster lens.
    • Wash or wipe your hands clean if you
    have been in contact with certain
    products such as insect repellent and
    suntan lotion to avoid possible damage
    to the interior painted surfaces.
    • Do not allow air fresheners and hand
    sanitizers to spill onto interior surfaces.
    If a spill occurs, wipe off immediately.
    Your warranty may not cover these
    damages.
    If a staining liquid like coffee or juice has
    been spilled on the instrument panel or on
    interior trim surfaces:
    282
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Vehicle Care 
    						
    							1. Wipe up spilled liquid using a clean,
    soft cloth as quickly as possible.
    2. Use Motorcraft Premium Leather and Vinyl Cleaner or a commercially
    available leather cleaning product for
    automotive interiors. Test any cleaner
    or stain remover on an inconspicuous
    area.
    3. Alternatively, wipe the surface with a clean, soft cloth and a mild soap and
    water solution. Dry the area with a
    clean, soft cloth.
    4. If necessary, apply more soap and water solution or cleaning product to
    a clean, soft cloth and press it onto the
    soiled area. Allow this to set at room
    temperature for 30 minutes.
    5. Remove the soaked cloth, then with a clean, damp cloth, use a rubbing
    motion for 60 seconds on the soiled
    area.
    6. Dry the area with a clean, soft cloth.
    CLEANING LEATHER SEATS (If
    Equipped)
    Note: Follow the same procedure as
    cleaning leather seats for cleaning leather
    instrument panels and leather interior trim
    surfaces.
    For routine cleaning, wipe the surface with
    a soft, damp cloth and a mild soap and
    water solution. Dry the area with a clean,
    soft cloth.
    For cleaning and removing stains such as
    dye transfer, use Motorcraft Premium
    Leather and Vinyl Cleaner or a
    commercially available leather cleaning
    product for automotive interiors.
    Note: Test any cleaner or stain remover on
    an inconspicuous area. You should:
    •
    Remove dust and loose dirt with a
    vacuum cleaner.
    • Clean and treat spills and stains as
    soon as possible.
    Do not use the following products as these
    may damage the leather:
    • Oil and petroleum or silicone-based
    leather conditioners.
    • Household cleaners.
    • Alcohol solutions.
    • Solvents or cleaners intended
    specifically for rubber, vinyl and
    plastics.
    REPAIRING MINOR PAINT
    DAMAGE
    Authorized dealers have touch-up paint to
    match your vehicle ’s color. Your vehicle
    color code is printed on a sticker on the
    front, left-hand side door jamb. Take your
    color code to your authorized dealer to
    make sure you get the correct color.
    Before repairing minor paint damage, use
    a cleaner such as Motorcraft Bug and Tar
    Remover to remove particles such as bird
    droppings, tree sap, insect deposits, tar
    spots, road salt and industrial fallout.
    Always read the instructions before using
    cleaning products.
    CLEANING THE ALLOY
    WHEELS
    Note: Do not apply a cleaning chemical to
    warm or hot wheel rims and covers.
    Note: Some automatic car washes may
    cause damage to the finish on your wheel
    rims and covers.
    283
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Vehicle Care 
    						
    							Note:
    Industrial-strength or heavy-duty
    cleaners in combination with brush agitation
    to remove brake dust and dirt, could wear
    away the clear coat finish over a period time.
    Note: Do not use hydrofluoric acid-based
    or high caustic-based wheel cleaners, steel
    wool, fuels or strong household detergents.
    Note: If you intend parking your vehicle for
    an extended period after cleaning the
    wheels with a wheel cleaner, drive your
    vehicle for a few minutes before doing so.
    This will reduce the risk of increased
    corrosion of the brake discs.
    Alloy wheels and wheel covers are coated
    with a clear coat paint finish. To maintain
    their condition we recommend that you:
    • Clean the wheels weekly using
    Motorcraft Wheel and Tire Cleaner.
    Apply using manufacturer's
    instructions.
    • Use a sponge to remove heavy
    deposits of dirt and brake dust
    accumulation.
    • Rinse thoroughly with a strong stream
    of water when you have completed the
    cleaning process.
    • To remove tar and grease, use
    Motorcraft Bug and Tar Remover.
    VEHICLE STORAGE
    If you plan on storing your vehicle for 30
    days or more, read the following
    maintenance recommendations to make
    sure your vehicle stays in good operating
    condition.
    We engineer and test all motor vehicles
    and their components for reliable, regular
    driving. Under various conditions,
    long-term storage may lead to degraded
    engine performance or failure unless you
    use specific precautions to preserve engine
    components. General
    •
    Store all vehicles in a dry, ventilated
    place.
    • Protect from sunlight, if possible.
    • If vehicles are stored outside, they
    require regular maintenance to protect
    against rust and damage.
    Body
    • Wash your vehicle thoroughly to
    remove dirt, grease, oil, tar or mud from
    exterior surfaces, rear-wheel housing
    and the underside of front fenders.
    • Periodically wash your vehicle if it is
    stored in exposed locations.
    • Touch-up exposed or primed metal to
    prevent rust.
    • Cover chrome and stainless steel parts
    with a thick coat of auto wax to prevent
    discoloration. Re-wax as necessary
    when you wash your vehicle.
    • Lubricate all hood, door and luggage
    compartment hinges and latches with
    a light grade oil.
    • Cover interior trim to prevent fading.
    • Keep all rubber parts free from oil and
    solvents.
    Engine
    • Change the engine oil and filter prior to
    storage because used engine oil
    contains contaminates which may
    cause engine damage.
    • Start the engine every 15 days for a
    minimum of 15 minutes. Run at fast idle
    with the climate controls set to defrost
    until the engine reaches normal
    operating temperature.
    284
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Vehicle Care 
    						
    							•
    With your foot on the brake, shift
    through all the gears while the engine
    is running.
    • We recommend that you change the
    engine oil before you use your vehicle
    again.
    Fuel system
    • Fill the fuel tank with high-quality fuel
    until the first automatic shutoff of the
    fuel pump nozzle.
    Cooling system
    • Protect against freezing temperatures.
    • When removing your vehicle from
    storage, check coolant fluid level.
    Confirm that there are no cooling
    system leaks and that fluid is at the
    recommended level.
    Battery
    • Check and recharge as necessary. Keep
    connections clean.
    • If storing your vehicle for more than 30
    days without recharging the battery,
    we recommend that you disconnect
    the battery cables to maintain battery
    charge for quick starting.
    Note: It is necessary to reset memory
    features if battery cables are disconnected.
    Brakes
    • Make sure the brakes and parking brake
    release fully.
    Tires
    • Maintain recommended air pressure. Miscellaneous
    •
    Make sure all linkages, cables, levers
    and pins under your vehicle are covered
    with grease to prevent rust.
    • Move vehicles at least 25 ft (7.5 m)
    every 15 days to lubricate working parts
    and prevent corrosion.
    Removing Vehicle From Storage
    When your vehicle is ready to come out of
    storage, do the following:
    • Wash your vehicle to remove any dirt
    or grease film build-up on window
    surfaces.
    • Check windshield wipers for any
    deterioration.
    • Check under the hood for any foreign
    material that may have collected
    during storage such as mice or squirrel
    nests.
    • Check the exhaust for any foreign
    material that may have collected
    during storage.
    • Check tire pressures and set tire
    inflation per the Tire Label.
    • Check brake pedal operation. Drive
    your vehicle 
    15 ft (4.5 m) back and
    forth to remove rust build-up.
    • Check fluid levels (including coolant,
    oil and gas) to make sure there are no
    leaks, and fluids are at recommended
    levels.
    • If you remove the battery, clean the
    battery cable ends and check for
    damage.
    Contact an authorized dealer if you have
    any concerns or issues.
    285
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Vehicle Care 
    						
    							TIRE SEALANT AND INFLATOR
    KIT (If Equipped)
    Note: The temporary mobility kit contains
    enough sealant compound in the canister
    for one tire repair only. See your authorized
    Ford dealer for replacement sealant
    canisters.
    The kit is located under the load floor in
    the trunk. The kit consists of an air
    compressor to re-inflate the tire and a
    canister of sealing compound that will
    effectively seal most punctures caused by
    nails or similar objects. This kit will provide
    a temporary tire repair allowing you to drive
    your vehicle up to 
    120 mi (200 km) at a
    maximum speed of 50 mph (80 km/h) to
    reach a tire service location. Air compressor (inside)
    A
    Selector switch
    B
    On and off button
    C
    Air pressure gauge
    D
    Sealant bottle and canister
    E
    Dual purpose hose: air and repair
    F
    Tire valve connector
    G
    Accessory power plug
    H
    Casing/housing
    I
    Bike/raft/sports ball adapters
    J
    286
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Wheels and TiresE175977  
    						
    							General Information
    WARNING
    Failure to follow these guidelines
    could result in an increased risk of
    loss of vehicle control, injury or death.
    Note:
    Do not use the kit if a tire has become
    severely damaged. Only punctures located
    within the tire tread can be sealed with the
    kit.
    Do not attempt to repair punctures larger
    than ¼ inch (6 millimeters) or damage to
    the tire's sidewall. The tire may not
    completely seal.
    Loss of air pressure may adversely affect
    tire performance. For this reason:
    Note: Do not drive the vehicle above
    50 mph (80 km/h).
    Note: Do not drive further than 
    120 mi
    (200 km). Drive only to the closest
    authorized Ford dealer or tire repair shop to
    have your tire inspected.
    • Drive carefully and avoid abrupt
    steering maneuvers.
    • Periodically monitor tire inflation
    pressure in the affected tire; if the tire
    is losing pressure, have the vehicle
    towed.
    • Read the information in the Tips for
    Use of the Kit section to make sure safe
    operation of the kit and your vehicle.
    Tips for Use of the Kit
    To ensure safe operation of the kit:
    • Read all instructions and cautions fully.
    • Before operating the kit, make sure
    your vehicle is safely off the road and
    away from moving traffic. Turn on the
    hazard lights.
    • Always set the parking brake to ensure
    the vehicle doesn't move unexpectedly. •
    Do not remove any foreign objects,
    such as nails or screws, from the tire.
    • When using the kit, leave the engine
    running (only if the vehicle is outdoors
    or in a well-ventilated area) so the
    compressor does not drain the
    vehicle's battery.
    • Do not allow the compressor to
    operate continuously for more than 15
    minutes. This will help prevent the
    compressor from overheating.
    • Never leave the kit unattended during
    operation.
    • Sealant compound contains latex.
    Those with latex sensitivities should
    use appropriate precautions to avoid
    an allergic reaction.
    • Keep the kit away from children.
    • Only use the kit when the ambient
    temperature is between 
    -22°F (-30°C)
    and 158°F (70°C).
    • Only use the sealing compound before
    the use-by date. The use-by date is on
    a label on the sealant canister and can
    be seen through the rectangular
    viewing window on the bottom of the
    compressor. Check the use-by date
    regularly and replace the canister after
    four years of non-use.
    • Do not store the kit unsecured inside
    the passenger compartment of the
    vehicle as it may cause injury during a
    sudden stop or crash. Always store the
    kit in its original location.
    • After sealant use, the tire pressure
    monitoring system sensor and valve
    stem on the wheel must be replaced
    by an authorized Ford dealer.
    • Operating the kit could cause an
    electrical disturbance in radio, CD, and
    DVD player operation.
    287
    Fusion (CC7) Canada/United States of America, enUSA, First Printing Wheels and Tires 
    						
    All Ford manuals Comments (0)

    Related Manuals for Ford Fusion 17 Owners Manual