Ford Fusion 16 Owners Manual
Have a look at the manual Ford Fusion 16 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 41 Ford manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Action Message The wheels are at a sharp angle or the steering wheel is being turned. Engine On due to Steering Wheel Maneuv- ering Engine may be on to support high demand for electrical accessories, such as operating power windows, rear defroster, or when using the power point. Engine On due to Accessory Usage Engine is on to support normal vehicle operation. Includesexternal vehicle conditions, such as altitude, traffic, low ambient temperature. Also includes battery outside optimal operating conditions (state of charge and temperature), and inadequate brake vacuum (can occur if the brake pedal is depressed a number of times in succession). Engine On Normal Oper- ation Engine is on in order to increase the engine temperature to an acceptable level. Engine On due to Low Temperature Engine is on to support normal vehicle operation due to lowoutside ambient temperature. Engine On due to Outside Air Temp Engine is on in order to increase the engine temperature to anacceptable level. Engine On due to Engine Warming Engine is on due to a low gear selection by the transmission. Engine On due to Selected Gear Engine is on due to a steep road grade. Engine On due to Steep Grade Engine is on due to no key being detected by the vehicle. Engine On due to Key not Detected Engine is on due to the driver door being opened. Engine On due to Driver Door Opened Engine is on due to the driver seat belt being unbuckled. Engine On due to Driver Belt Unbuckled Engine is on to achieve or maintain interior compartment atan acceptable level. Engine On due to Heating /Cooling Engine is on, which is required to support the use of the power outlet (110V). Engine On due to Power Outlet in Use Engine is on due to the vehicle battery needing to be charged. Engine On due to Vehicle Charging You have disabled the Start Stop feature. Deactivated by Driver 108 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Automatic Engine Shutdown Action Message The engine is getting ready to shut off. Engine Shuts Off in XX Seconds The engine has shut off to help increase fuel economy. Engine Shut Off for Fuel Economy The engine is getting ready to shut off. You can press OK onthe left steering wheel button to override the shut down. Engine Shuts Off in XX Seconds Press Ok to Override All-Wheel Drive Action Message The all-wheel drive system temporarily turns off to protectitself from overheating. AWD Temporarily Disabled The all-wheel drive system temporarily turns off to protect itself from overheating or if you are using the temporary spare tire. AWD Off The all-wheel drive system will resume normal function and clear this message after driving a short distance with the road tire re-installed or after the system cools. AWD Restored The all-wheel drive system is not operating properly. If thewarning stays on or continues to come on, contact an authorized dealer as soon as possible. AWD Malfunction Service Required 109 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Battery and Charging System Action Message The charging system needs servicing. If the warning stays on or continues to come on, contact an authorized dealer as soon as possible. Check Charging System The battery management system detects an extended low-voltage condition. Your vehicle will disable various features to help preserve the battery. Turn off as many of the electrical loads as soon as possible to improve system voltage. If the system voltage has recovered, the disabled features will operate again as normal. Low Battery Features Temporarily Turned Off The battery management system determines that the batteryis at a low state of charge. Turn your ignition off as soon as possible to protect the battery. This message will clear once you restart your vehicle and the battery state of charge has recovered. Turning off unnecessary electrical loads will allow faster battery state-of-charge recovery. Turn Power Off to Save Battery Blind Spot Information and Cross Traffic Alert System Action Message A fault with the system has occurred. Contact an authorizeddealer as soon as possible. Blindspot System Fault The system sensors are blocked. See Blind Spot Informa- tion System (page 201). Blindspot Not Available Sensor Blocked See Manual The system detects a vehicle. See Blind Spot Information System (page 201). Cross Traffic Vehicle Coming From X The blind spot information system and cross traffic alert system sensors are blocked. See Blind Spot Information System (page 201). Cross Traffic Not Avail- able Sensor Blocked See Manual A fault with the system has occurred. Contact an authorizeddealer as soon as possible. Cross Traffic System Fault 110 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Doors and Locks Action Message The door(s) listed is not completely closed. X Door Ajar The luggage compartment is not completely closed. Trunk ajar The hood is not completely closed. Hood ajar The system has disabled the door switches. Switches Inhibited Security Mode The factory keypad code displays in the information displayafter system resets the keypad. Factory Keypad Code XXXXX Driver Alert Action Message Stop and rest as soon as it is safe to do so. Driver Alert Warning Rest Now Take a rest break soon. Driver Alert Warning Rest Suggested Fuel Action Message An early reminder of a low fuel condition. Fuel Level Low The fuel fill inlet may not be properly closed. Check Fuel Fill Inlet Hill Start Assist Action Message Hill start assist is not available. Contact an authorized dealer.See Hill Start Assist (page 175). Hill Start Assist Not Available 111 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Keys and Intelligent Access Action Message A reminder to press the brake while starting your vehicle. Press Brake to START The system does not detect a key in your vehicle. See KeylessStarting (page 146). No Key Detected You pressed the start/stop button to switch off the engine and your vehicle does not detect your intelligent access key inside your vehicle. Restart Now or Key is Needed Your vehicle is in the run ignition state. Run Power Active There is a problem with your vehicle ’s starting system. Contact an authorized dealer for service. Starting System Fault You have successfully programmed an intelligent access keyto the system. Key Program Successful You have failed to program an intelligent access key to thesystem. Key Program Failure You have programmed the maximum number of keys to the system. Max Number of Keys Learned You have not programmed enough keys to the system. Not Enough Keys Learned The key battery is low. Change the battery as soon as possible. Key Battery Low Replace Soon An attempt is made to program a spare key using two existing keys. Could Not Program Integrated Key A reminder that you are exiting your vehicle and the engine is on. Engine On 112 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Lane Keeping System Action Message The system has malfunctioned. Contact your authorizeddealer as soon as possible. Lane Keeping Sys. Malfunction Service Required The system has detected a condition that has caused thesystem to be temporarily unavailable. Front Camera Tempor- arily Not Available The system has detected a condition that requires the wind-shield to be cleaned to operate properly. Front Camera Low Visib- ility Clean Screen The system has malfunctioned. Contact your authorizeddealer as soon as possible. Front Camera Malfunc- tion Service Required The system requests you to keep your hands on the steering wheel. Keep Hands on Steering Wheel Maintenance Action Message Stop your vehicle as soon as safely possible and turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact an authorized dealer as soon as possible. LOW Engine Oil Pressure The engine oil life remaining is 10% or less. See Engine Oil Check (page 251). Change Engine Oil Soon The oil life left is at 0%. See Engine Oil Check (page 251). Oil Change Required The brake fluid level is low, inspect the brake system immedi-ately. See Brake Fluid Check (page 255). Brake Fluid Level LOW The brake system needs servicing. Stop your vehicle in a safeplace. Contact an authorized dealer. Check Brake System The engine coolant temperature is excessively high. Stop yourvehicle in a safe place and allow the engine to cool. If the problem persists, contact an authorized dealer. See Engine Coolant Check (page 252). Engine Coolant Overtem- perature 113 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Action Message The engine has reduced power to help reduce high engine temperature. Power Reduced to Lower Engine Temp Your vehicle is still in Transport or Factory mode. This may not allow some features to operate properly. See an author- ized dealer. Transport / Factory Mode The powertrain needs service due to a powertrain malfunction. See Manual MyKey Action Message You cannot program a MyKey. MyKey Not Created MyKey is active. MyKey Active Drive Safely When switching on your vehicle and MyKey is in use, displaysthat the MyKey speed limit is on. Speed Limited to XX MPH/km/h MyKey is in use, the MyKey speed limit is on and your vehiclespeed is approaching 80 mph (130 km/h). Near Vehicle Top Speed You have reached the speed limit set for your MyKey. Vehicle at Top Speed of MyKey Setting You have an active MyKey with a programmed set speed limit. Check Speed Drive Safely The belt-minder turns on with a MyKey in use. Buckle Up to Unmute Audio With a MyKey in use, AdvanceTrac turns on. AdvanceTrac On - MyKey Setting With a MyKey in use, traction control turns on. Traction Control On - MyKey Setting With a MyKey in use, park aid is always on. MyKey Park Aid Cannot be Deactivated With a MyKey in use, lane keeping alert turns on. Lane Keeping Alert On MyKey Setting 114 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Park Aid Action Message The system has detected a condition that requires service. Contact an authorized dealer. See Principle of Operation (page 179). Check Front Park Aid The system has detected a condition that requires service. Contact an authorized dealer. See Principle of Operation (page 179). Check Rear Park Aid Front park aid status. Front Park Aid On Off Rear park aid status. Rear Park Aid On Off Park Brake Action Message You have set the parking brake and you have driven the vehiclemore than 3 mph (5 km/h). If the warning stays on after you have released the parking brake, contact an authorized dealer. Park Brake Engaged The electric parking brake is set and the vehicle is driven morethan 3mph (5km/h). Release park brake before continued driving. Release Park Brake The electric parking brake system has detected a conditionthat requires service. Contact an authorized dealer. Park Brake Malfunction Service Now The electric parking brake is not fully applied. Park Brake Not Applied The electric parking brake is not fully released. Park Brake Not Released The electric parking brake system has been put into a special mode that is used to allow service of the rear brakes. Contactan authorized dealer. Park Brake Maintenance Mode The electric parking brake is set and an automatic release isattempted, but cannot be performed. Perform a manual release. Park Brake Use Switch to Release The electric parking brake is set and a manual release isattempted without the brake pedal being pressed. To Release: Press Brake and Switch The electric park brake system has detected a condition thatrequires service. Contact an authorized dealer. Park Brake Limited Function Service Required 115 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Action Message You have not released the electric parking brake causing it to overheat. Park Brake System Overheated The electric parking brake is set. Only displayed when a faultis present that is causing the brake system warning lamp to be illuminated continuously. Park Brake Applied The electric parking brake is released. Only displayed whena fault is present that is causing the brake system warning lamp to be illuminated continuously. Park Brake Released Power Steering Action Message The power steering system detects a condition that requiresservice. Contact an authorized dealer. Steering Fault Service Now The power steering system is not working. Stop your vehiclein a safe place. Contact an authorized dealer. Steering Loss Stop Safely The power steering system detects a condition that requiresservice. Contact an authorized dealer. Steering Assist Fault Service Required Pre-Collision Assist Action Message There is a system malfunction with the pre-collision assist system. The system will be disabled. Contact an authorized dealer as soon as possible. Pre-Collision Assist Malfunction The pre-collision assist system radar is blocked because of poor radar visibility due to bad weather or ice, mud, water in front of the radar. Driver can typically clean the sensor to resolve. Contact an authorized dealer as soon as possible. Pre-Collision Assist Not Available Sensor Blocked See Manual There is a system malfunction with the pre-collision assist system. The system will be disabled. Contact an authorized dealer as soon as possible. Pre-Collision Assist Not Available 116 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\
Remote Start Action Message A reminder to turn the key on to drive your vehicle after a remote start. To Drive: Turn Key to On A reminder to apply the brake and push the gearshift buttonto drive your vehicle after a remote start. To Drive: Press Brake and Start Button Seats Action Message A reminder that memory seats are not available while driving. Memory Recall Not Permitted While Driving Shows where you have saved your memory setting. Memory X Saved Starting System Action Message A reminder to apply the brake when starting your vehicle. Press Brake to Start The starter is attempting to start your vehicle. Engine Start Pending Please Wait The system has cancelled the pending start. Pending Start Cancelled The starter has exceeded its cranking time in attempting tostart your vehicle. Cranking Time Exceeded 117 Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing Information Displays ,QIRUPDWLRQ3URYLGHGE\