Ford F 450 Owners Manual
Have a look at the manual Ford F 450 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 41 Ford manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: 410Scheduled Maintenance 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
EXCEPTIONS Normal vehicle axle maintenance:Rear axles and power take-off (PTO) units with synthetic fluid and light-duty trucks equipped with Ford-design axles are lubricated for life; do not check or change fluid unless a leak is suspected, service is required or the assembly has been submerged in water. During long periods of trailer towing with outside temperatures above 70°F (21°C) and at wide-open throttle for long periods above 45 mph (72 km/h), non-synthetic rear axle fluids should be changed every 3000 miles (4800 kilometers) or three months, whichever comes first. This interval can be waived if the axle is filled with 75W140 synthetic gear fluid meeting Ford specification WSL-M2C192-A, part number F1TZ-19580-B or equivalent. Add friction modifier XL-3 (EST-M2C118-A) or equivalent for complete refill of Traction-Lok rear axles (seeTechnical specificationsin theCapacities and Specificationschapter for details). Police/Taxi/Livery vehicle axle maintenance:Change rear axle fluid every 100000 miles (160000 km). Rear axle fluid change may be waived if the axle was filled with 75W140 synthetic gear fluid meeting Ford specification WSL-M2C192-A, part number FITZ-19580-B or equivalent. Add four ounces (118 mL) of additive friction modifier XL-3 (EST-M2C118-A) or equivalent for complete refill of Traction-Lok rear axles. The axle fluid should be changed anytime the axle has been submerged in water. California fuel filter replacement:If the vehicle is registered in California, the California Air Resources Board has determined that the failure to perform this maintenance item will not nullify the emission warranty or limit recall liability prior to the completion of the vehicle’s useful life. Ford Motor Company, however, urges you to have all recommended maintenance services performed at the specified intervals and to record all vehicle service. Hot climate oil change intervals:Vehicles operating in the Middle East, North Africa, Sub-Saharan Africa or locations with similar climates using an American Petroleum Institute (API) Certified for Gasoline Engines (Certification mark) oil of SM or SN quality, the normal oil change interval is 5000 miles (8000 kilometers). If the available API SM or SN oils are not available, then the oil change service interval is 3000 miles (4800 kilometers). Engine air filter replacement:Engine air filter life is dependent on exposure to dusty and dirty conditions. Vehicles operated in these conditions require frequent inspection and replacement of the engine air filter. Scheduled Maintenance411 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
ENGINE COOLANT CHANGE RECORD Initial change Six years or 105000 miles (168000 km) (whichever comes first) After initial change Every three years or 45000 miles (72000 km) Engine Coolant Change Log DEALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE:D EALERVALIDATION: P&A C ODE: RO#: HOURS: DAT E:MILEAGE: 412Scheduled Maintenance 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: •Make and receive calls. •Access and play music from your portable music player. •Use 911 Assist®, Vehicle Health Report and SYNC Services (Traffic, Directions & Information) (if equipped). •Use applications, such as Pandora and Stitcher, via SYNC AppLink™ (if applicable). •Access phonebook contacts and music via voice commands. •Stream music from your connected phone. •Text message. •Use the advanced voice recognition system. •USB device charging (if your device supports this). SYNC®413 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
GENERAL INFORMATION Ensure that you review your device’s user guide before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-8:00pm EST In the United States, call: 1–888–270–1055 In Canada, call: 1–800–565–3673 Times are subject to change due to holidays. SYNC Owner Account Why do I need a SYNC owner account? •Required to activate Vehicle Health Report and to view the reports online. •Required to activate the subscription-based SYNC Services and to personalize your Saved Points and Favorites. •Essential for keeping up with the latest software downloads available for SYNC. •Access to customer support for any questions you may have. Driving Restrictions For your safety, certain features are speed-dependent and restricted when your vehicle is traveling over 3 mph (5 km/h). Safety Information WARNING:Driving while distracted can result in loss of vehicle control, accident and injury. Ford strongly recommends that drivers use extreme caution when using any device that may take their focus off the road. Your primary responsibility is the safe operation of the vehicle. We recommend against the use of any handheld device while driving, encourage the use of voice-operated systems when possible and that you become aware of applicable state and local laws that may affect use of electronic devices while driving. When using SYNC: • Do not operate playing devices if the power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities. 414SYNC® 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
•Do not leave playing devices in your vehicle during extreme conditions as it could cause them damage. See your device’s user guide for further information. •Do not attempt to service or repair the system. See your authorized dealer. For your safety, some SYNC functions are speed-dependent. Their use is limited to when your vehicle is traveling at speeds under 3 mph (5 km/h). Make sure that you review your device’s user guide before using it with SYNC. Privacy Information When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cell phone was not connected to the system. In addition, if you connect a media device, the system creates and retains an index of supported media content. The system also records a short development log of approximately 10 minutes of all recent system activity. The log profile and other system data may be used to improve the system and help diagnose any problems that may occur. The cellular profile, media device index, and development log remain in the vehicle unless you delete them and are generally accessible only in the vehicle when the cellular phone or media player is connected. If you no longer plan to use the system or the vehicle, we recommend you perform a Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the sections on 911 Assist®, Vehicle Health Report, and Traffic, Directions and Information. SYNC®415 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session Push the voice icon; a tone sounds and Listening appears in the display. Say any of the following: Say: If you want to: “Phone” Make calls. “USB” Access the device connected to your USB port. “Bluetooth Audio” Stream audio from your phone. “Line in” Access the device connected to the auxiliary input jack. “Cancel” Cancel the requested action. “SYNC” Return to the main menu. “Voice settings” Adjust the level of voice interaction and feedback. “Vehicle Health Report” Run a vehicle health report. * “Services” Access the SYNC Services portal.* “Mobile apps” Access mobile applications.* “Help” Hear a list of voice commands available in the current mode. *If equipped, U.S. only. System Interaction and Feedback The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings). You can customize the voice recognition system to provide more or less instruction and feedback. The default setting is to a higher level of interaction in order to help you learn to use the system. You can change these settings at any time. 416SYNC® 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
Adjusting the Interaction Level Push the voice icon; when prompted, say “Voice settings”, then any of the following: When you say: The system: “Interaction mode standard” Provides more detailed interaction and guidance. “Interaction mode advanced” Provides less audible interaction and more tone prompts. The system defaults to the standard interaction mode. Confirmation prompts are short questions the system asks when it is not sure of your request or when there are multiple possible responses to your request. (For example, the system may ask “Phone, is that correct?”) If turned off, the system simply makes a best guess as to what you requested and you may still occasionally be asked to confirm settings. “Confirmation prompts on” “Confirmation prompts off” The system creates candidate lists when it has the same confidence level of several options based on your voice command. When turned on, you may be prompted with as many as four possibilities for clarification. For example, “Say 1 after the tone to call John Doe at home. Say 2 after the tone to call Johnny Doe on mobile. Say 3 after the tone to call Jane Doe at home.” Or, “Say 1 after the tone to play John Doe, Say 2 after the tone to play Johnny Doe.” “Phone candidate lists on” “Phone candidate lists off” “Media candidate lists on” “Media candidate lists off” Helpful Hints •Make sure the interior of the vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands. •After pressing the voice icon, wait until after the tone sounds and Listening appears before saying a command. Any command spoken prior to this does not register with the system. SYNC®417 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
•Speak naturally, without long pauses between words. •At any time you can interrupt the system while it is speaking by pressing the voice icon. USING SYNC WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone’s functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions: •Answering an incoming call. •Ending a call. •Using privacy mode. •Dialing a number. •Redialing. •Call waiting notification. •Caller ID. Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone’s compatibility, see your phone’s user manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. Pairing a Phone for the First Time Note:SYNC can support downloading up to approximately 2000 entries per Bluetooth-enabled cellular phone. Note:Make sure the vehicle ignition and radio are turned on and the transmission is in positionP. Note:To scroll through the menus, press the up and down arrows on your audio system. Wirelessly pairing your phone with SYNC allows you to make and receive hands-free calls. 1. Press the phone button; when the display indicates no phone is paired, press OK. 2. When Add Bluetooth Device appears, press OK. 3. When Find SYNC appears in the display, press OK. 4. Put your phone into Bluetooth discovery mode. See your phone’s user guide if necessary. 5. When prompted on your phone’s display, enter the six-digit PIN provided by SYNC in the radio display. 418SYNC® 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)
6. The display indicates when the pairing is successful. 7. Depending on your phone’s capability and your market, the system may prompt you with questions such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up), downloading your phone book, etc. Pairing Subsequent Phones Note:To scroll through the menus, press the up and down arrows on your audio system. Note:Make sure the vehicle ignition and radio are turned on and that the transmission is in positionP. 1. Press the phone button and scroll until System Settings is selected. 2. Press OK and scroll until Bluetooth Devices is selected and press OK. 3. Scroll until Add Bluetooth Device is selected and press OK. 4. When Find SYNC appears in the display, press OK. 5. Put your phone into Bluetooth discovery mode. See your phone’s user guide if necessary. 6. When prompted on your phone’s display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful. 7. The system then prompts with questions such as if you would like to set the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up), download your phone book, etc. Phone Voice Commands Press the voice icon and say “Phone”. Say any of the following: “PHONE” “Call ”1 “Call on mobile OR cell”1 “Call on other”1 “Phone book at home”2 “Phone book on mobile OR cell”2 “Call history outgoing”2 “Phone book on Other”2 “Call history missed”2 SYNC®419 2013 F-250/350/450/550(f23) Owners Guide gf, 1st Printing USA(fus)