Faroudja Fdp-Dila2 Installation And Operations Manual

31
Basic Operations 
■Projector’s buttons
■Remote control unitThe following describes the basic procedure for normal use 
of the projector.
1. Turning on the Power
1Turn on the MAIN POWER switch.
ON [ ❙
❙❙ ❙ ]:The main power turns on and the STAND BY 
indicator comes on.
2Press the OPERATE button for one 
second or more.
•The OPERATE indicator lights and the projected 
screen slowly appears.
Notes
•After the power is turned on, the image may be jumbled for 
a few seconds, but this is not a malfunction....

32
Basic Operations
■Projector’s buttons
■Remote control unit
■Language display
The display languages of the menus, direct buttons 
(DIGITAL ZOOM, KEYSTONE, etc) and messages is set to 
“ENGLISH” when the projector is bought. The display 
language can be selected from the following 6 languages: 
“(Japanese)”, “English (English)”, “Deutsch
(German)”, “Español (Spanish)”, “Italiano (Italian)” and 
“Français (French)”. (Refer to page 46.) However, some 
words (VIDEO, NTSC, Quick Alignment, etc) are only...

33
Basic Operations 
■Projector’s buttons
■Remote control unit3. Adjust the Screen Size (Zooming)
How to adjust the projected screen size differs depending on 
the lens unit (optional) you are using.
GL-M2910G (without zooming function):
The projected screen size cannot be changed.
GL-M2915SG/GL-M2920ZG/GL-M2930SZG (with 
zooming function):
Adjust the projected screen size with the following buttons on 
the remote control unit.
Note
•The function of GL-M2915SG is to adjust the view angle
zooming by 2%....

34
Basic Operations
■Projector’s buttons
■Remote control unitTurning off Image (HIDE)
Video image can be temporarily turned off. 
Press the HIDE button once:
Video image instantly turn off.
Press the HIDE button again:
Video image come on again.
Note
•When the projected image input is changed, the HIDE 
function is canceled and the image return.
Removing the Trapezoidal Distortion of 
the Image
If the image projected on the screen is distorted in trapezoid 
form, correct it with the KEYSTONE buttons on...

35
Basic Operations 
■Remote control unitQuick Alignment Function
(QUICK ALIGN.)
The Quick Alignment function automatically adjusts (sets) 
the screen settings of the image input from the PC1, PC2 or 
DVI input terminals. This can only be performed from the 
remote control.
While projecting an image on the screen, press the QUICK 
ALIGN. button on the remote control.
Quick alignment is conducted to obtain best image.
*During the automatic alignment, “Quick Alignment” appears 
on the screen, and then...

36
Basic Operations
■Remote control unit
FREEZE message
FREEZE inhibit message
DIGITAL ZOOM inhibit message
Displaying a Still Picture (FREEZE)
While projecting an image, a still picture is obtained at any 
time by using the FREEZE button on the remote control.
When you press the FREEZE button:
“FREEZE” appears on the screen for a few seconds and 
then the still picture is shown on the screen. Refer to the 
FREEZE message shown on the left of this page.
*To forcibly clear “FREEZE”, press the EXIT...

37
Menu Operations
You can adjust picture quality, set functions, get information on the input video signal, etc. using the menus. From the 
following menu transition diagrams, you can see the overall menus and basic button operation in menu mode. Note that there 
are three menu modes, No signal menu mode, video menu mode and PC menu mode. When the MENU button is pressed, 
the projector enters one of these modes by judging the input signal being received.
■Menu Transition Diagram in No signal Menu Mode...

38
Menu Operations
■Menu Transition Diagram in Video Menu Mode
Set up 1
Position
Gamma
Aspect ratio
Page 2
ENTER
ENTERCinema
4:3 DownUp
16:9
Lamp control
Normal
LPC
LOC
Keystone 123
12,12
Ye s
Color temp.
All reset?
No
Menu
Image adj.
Set up
Color temp.
Options
Language
Information
Position
Gamma
Aspect ratio
Decoder
Tracking
Deinterlace
Phase
Screen
HDTV
Menu
Image adj.
Set up
Color temp.
Options
Language
InformationMenu display
Line display
Lamp time display
Keystone
Lamp control
Color temp.
Color...

39
Menu Operations 
.
■Quick Reference Guide for Video Menu Mode
*: Factory set value.
Main Menu in Video Menu Mode (While receiving video-device-related signals)
Image adj. 
→ (Refer to page 49)
Contrast: Contrast of the video image being projected can be adjusted. (–30 to +30, 0*)
Brightness: Brightness of the video image being projected can be adjusted. (–30 to +30, 0*) 
Color: Color density of the video image being projected can be adjusted. (–30 to +30, 0*)
Tint: Tint of the video image being...

40
Menu Operations
■Menu Transition Diagram in PC Menu Mode
Menu
Image adj.
Set up
Color temp.
Options
Language
InformationTracking
Phase
Position
Resize
Clamp
Menu
Image adj.
Set up
Color temp.
Options
Language
InformationMenu display
Line display
Lamp time display
Keystone
Lamp control
Ye s
Image adj.
All reset?
No
ENTER
Position
Disp.Posi. Menu
Ye s
Color temp.
All reset?
No
Color temp.
Color temp.
RED
GREEN
BLUE
All reset Color temp.
RED
GREEN
BLUE
All reset123
123
123
ENTER
Middle HighLow
Menu
Image...