Faroudja Fdp-Dila2 Installation And Operations Manual

71
Specifications 
Outside dimensions
■Top
■Front■Side
Unit: inch
LAMP TEMPSTAND BY
HIDE
PC
VIDEO
MENU KEYSTONE
PRESET
EXIT ENTEROPERATE
5-1/4(133)22.430
18.444
19.300
22.430
15-1/22-1/8
2-1/8(53)
10.60511.703
19.300
10-
1/8(256)2-7/8(70)
111.703 

72
Specifications
Pin assignment (Specifications for terminals)
■Y/C terminal
■RS-232C terminal
■PC1 terminal/PC OUT terminal
■DVI terminal
1
23 4
Pin number Signal name
1GND (Y)
2GND (C)
3Y
4C
2
3
4 56
7
1 8 9
Pin number Signal name Pin number Signal name
1N/C6N/C
2RD7N/C
3 TD8N/C
4N/C9N/C
5GND
123
45
67
8910 1112
1314
15
Pin number Signal name Pin number Signal name
1Red9N/C
2Green 10 GND (SYNC)
3Blue11GND
4N/C12N/C
5N/C13H.SYNC
6GND (Red) 14 V.SYNC
7GND (Green) 15 N/C
8GND (Blue)
12345678
17 9111315...

73
RS-232C external control
By connecting a computer to the RS-232C terminal, you can control the projector. Use a reverse connection cable as the RS-
232C connection cable.
The commands to control the projector and the response data against the received commands are explained here.
For further information, please consult the dealer where you purchased your projector or consult the Service Center.
1. Communication Specifications
The communication specifications are as follows:
*Factory set value. To...

74
RS-232C external control
2-3 Parameters used for the data format
The following three kinds of parameters are prepared for the control command and response data.
(1) Numeric value
Designates the 2-byte hexadecimal value with the sign as the 4-digit (byte) characters.
Designation allowable range: “8000” to “7FFF”
(2) ON/OFF
Designates the status (ON/OFF) of the projector, such as POWER and HIDE.
(3) Special parameters
Input switching parameters:
Operation mode parameters:
3. Control command table
The...

75
Appendix
■Relationship between Projection Distances and Projection Screen Sizes
Notes
•The relationship between the projection distances and projection screen sizes differs depending on the lens unit (optional) 
you are using.
•The projection distance and projection screen sizes listed here are only for a guide. Use them as reference when setting the 
projector.
For lens unit GL-M2910G (1:1):
For lens unit GL-M2915SG (1.5:1):
Projection screen size 
(Diagonal length)Approximate projection distance...

76
Appendix
For lens unit GL-M2920ZG (2 to 3:1):
For lens unit GL-M2930SZG (2.9 to 5.5:1):
Projection screen size 
(Diagonal length)Approximate projection distance    unit: ft (m)
For 4:3 aspect-ratio screens For 16:9 aspect-ration screens
Wide end Tele end Wide end Tele end
 40" (approx. 101.6 cm) --------- --------- --------- 8.53 (2.60)
 42" (approx. 106.7 cm) --------- 8.23 (2.51) --------- 9.96 (2.73)
 50" (approx. 127.0 cm) ---------9.74 (2.97) ---------10.60 (3.23)
 60" (approx....

77 

78 

79 

WARRANTY
LIMITED WARRANTY
Faroudja Laboratories, Inc. (Faroudja) warrants that its products will be free of defects in 
workmanship and material and conform substantially to published specifications under normal 
use and service. This warranty is made to the first purchaser of the products and extends for
twelve (12) months from the date of sale. The warranty for the light source lamp is 90 days. The
warranty does not apply to products damaged as a result of accident, misuse, neglect, alteration,...