Epson Stylus Pro 7400 User Manual

							Printing with Mac OS X181
3
3
3
3
3
3
3
3
3
3
3
3
English
Double Cut
Select this setting to avoid the slight gap that occurs with the 
Single Cut setting. A margin is created between the pictures, and 
1 mm along the inside of each picture is cut.
Normal Cut
Select this setting to keep margins at the top and bottom of the 
printed data.
 
						

							182Printing with Mac OS X
Off
Select this setting to cut printouts manually. To cut printouts 
manually, follow the steps below.
Note:
When you print on Canvas, only this setting is available.
1. Press the Paper Source l button to select Roll Auto Cut Off 
.
2. Press the Enter  button.
3. The printer automatically feeds the paper to the cutter guide, 
and the printer becomes offline. Pause appears on the LCD.
4. If necessary, adjust the cutting position by using the Paper 
Feed d button or Paper Feed u button.
5. Cut the paper along the cutter guide using the manual cutter 
unit.
6. After cutting the paper, press the Pause   button. The printer 
becomes online.
Print Page Line
You can specify whether to print a page line on the right side and 
also below the printed data for manual cutting. 
The Print Page Line operation changes according to the Auto Cut 
setting. Check these settings as necessary by referring the printer’s 
operation.
Auto Cut Print Page Line Printer’s Operation
Single Cut
Double Cut
Normal CutSelected Prints page line on the right side 
only, and cuts paper 
automatically after the print job.
 
						

							Printing with Mac OS X183
3
3
3
3
3
3
3
3
3
3
3
3
English
Save Roll Paper
This function is effective if you wish to save roll paper, because 
blank portion of the last page or your printed data is not fed 
through the printer.
Expansion
You can print your data without margins on paper. This menu 
appears when you select the paper size with Roll Paper - 
Borderless (Auto Expand) or Sheet - Borderless (Auto Expand) 
as the Paper Size in the Page Setup dialog.
Single Cut
Double Cut
Normal CutNot selected Does not print page line, and 
cuts paper automatically after 
the print job.
Off Selected Prints page lines on the right side 
and below the printed data, but 
does not cut paper 
automatically after the print job.
Off Not selected Does not print page lines or cut 
paper automatically after the 
print job.
 
						

							184Printing with Mac OS X
Summary
You can confirm the current settings in the Print dialog.
Note:
The Summary option is a standard feature of Mac OS X.
Amount of 
EnlargementUsing the slider, you can control the amount of the 
image that extends beyond the edges of paper 
during borderless printing.
For most print jobs, Standard is recommended to 
eliminate margins on all sides of paper.
In a very humid environment, the width of paper 
may expand due to moisture absorption. In this 
case, move the slider to Max to eliminate margins 
around the image. If Max is selected, the center of 
the image may move about 1 mm to the right.
Moving the slider towards Min decreases the 
amount of the image enlargement; however, as this 
amount decreases, margins may appear on one or 
more sides of paper.
 
						

							Printing with Mac OS X185
3
3
3
3
3
3
3
3
3
3
3
3
English
Saving your settings in the Print dialog
To save your settings in the Print dialog, follow the steps below.
1. Select Save as from the Presets. 
2. Enter the name of the custom setting in the Save Preset As.
3. Make sure that the name you entered in step 2 is saved in the 
Presets pull-down menu.
Using your saved settings in the Print dialog
To use your saved settings, select the name of your custom setting 
from the Presets pull-down menu.
If you change the Media Type or Color settings while your 
customized setting is selected in the Saved Settings list, your 
saved setting is not affected by the change. To return to your saved 
setting, simply reselect it in the list.
Preview
You can see how your data will look before actually printing it.
Note:
Preview is a standard feature of Mac OS X.
To preview your data, follow the steps below.
 
						

							186Printing with Mac OS X 1. Make your printer driver settings.
2. Click Preview in the Print dialog. The Preview dialog appears 
and displays a preview of your data.
Performing Borderless Printing
When selecting the paper size with Sheet - Borderless (Auto 
Expand), Sheet - Borderless (Retain Size), Roll Paper - 
Borderless (Auto Expand), Roll Paper - Borderless (Retain 
Size), or Roll Paper - Borderless Banner as the Paper Size in the 
Page Setup dialog, Epson recommends the following media 
conditions.
 
						

							Printing with Mac OS X187
3
3
3
3
3
3
3
3
3
3
3
3
English
Accommodate media width:
* for EPSON Stylus Pro 9800/9400 use only.
Note:
❏If your application has margin settings, make sure they are set to 
zero before printing.
❏When printing on cut-sheet media, only the left and right margins 
are set to zero. The top margin is always 3 mm, and the bottom 
margin is always 14 mm. The back side of the paper may smear.
❏The ink may contaminate the platen of the printer. In this case, wipe 
the ink away using a cloth.
❏Printing with this feature takes longer time than normal printing.❏10 inch, 254 mm
❏300 mm
❏13 inch, 329 mm (Super A3/B)
❏16 inch, 406.4 mm
❏17 inch, 431.8 mm
❏515 mm (B2)
❏594 mm (A1)
❏24 inch, 609.6 mm
❏728 mm (B1)*
❏36 inch, 914.4 mm*
❏44 inch, 1117.6 mm*
 
						

							188Printing with Mac OS X ❏When Premium Glossy Photo Paper (250) roll paper or Premium 
Semigloss Photo Paper (250) roll paper is used in printing, the top 
margin is always 20 mm.
❏The following media may smear in the top area when selecting 
Single Cut or Double Cut for the Auto Cut setting: 
Doubleweight Matte Paper, Singleweight Matte Paper, Enhanced 
Matte Paper, Textured Fine Art Paper, and UltraSmooth Fine Art 
Paper.
❏Smear may result in the top and bottom areas depending on the 
media.
To perform borderless printing, follow the steps below.
Note:
Always match the Format for setting in the Page Setup dialog with the 
Printer setting in the Print dialog; otherwise, data may not be printed 
correctly.
1. Select the paper size with Sheet - Borderless (Auto Expand), 
Sheet - Borderless (Retain Size), Roll Paper - Borderless 
(Auto Expand), Roll Paper - Borderless (Retain Size), or Roll 
Paper - Borderless Banner as the Paper Size in the Page 
Setup dialog.
2. Make the Auto Cut setting. See “Auto Cut” on page 180.
3. Click OK.
4. Start printing your data from your application.
Canceling Printing
To cancel printing, follow the steps below.
 
						

							Printing with Mac OS X189
3
3
3
3
3
3
3
3
3
3
3
3
English
1. Open the Print Center (for Mac OS X 10.2.x) or Printer Setup 
Utility (for Mac OS X 10.3.x). 
2. Turn off the printer.
3. In the Document Name list, select the data which is printing 
and click the Delete button to cancel printing.
Printer Utility Dialog
Accessing the EPSON Printer Utility
To access the EPSON Printer Utility, follow the steps below.
1. Double-click Macintosh HD (default setting).
2. Double-click the Applications folder.
3. Double-click the EPSON Printer Utility icon. 
Mac OS X 10.2 or later users can also access the EPSON Printer 
Utility dialog in the following way. 
1. Double-click Macintosh HD (default setting).
2. Double-click the Applications folder.
3. Double-click the Utilities folder.
4. Double-click the Print Center icon (for Mac OS X 10.2.x) or 
Printer Setup Utility (for Mac OS X 10.3.x). 
5. Select the printer you want to use to access its EPSON Printer 
Utility.
 
						

							190Printing with Mac OS X 6. Click the Configure button (for Mac OS X 10.2.x) or the Utility 
button (for Mac OS X 10.3.x) in the Printer List dialog.
Using the Printer Utilities
The EPSON printer utilities let you check the current printer 
status and perform printer maintenance from your computer. 
You can also access the User’s Guide, the paper information, and 
the Technical Support Web Site by clicking the Print Assistant 
button.
Note:
❏Do not use the Nozzle Check, Head Cleaning, or Print Head 
Alignment utilities if your printer is connected to your computer 
through a network.
❏Do not use the Nozzle Check, Head Cleaning, or Print Head 
Alignment utilities while printing is in progress; otherwise, your 
printout may be marred.