Epson Stylus Pro 7400 User Manual

							Printing with Mac OS 9.x131
2
2
2
2
2
2
2
2
2
2
2
2
English
Normal Cut
Select this setting to keep margins at the top and bottom of the 
printed data.
Off
Select this setting to cut printouts manually. To cut printouts 
manually, follow the steps below.
Note:
When you print on Canvas, only this setting is available.
1. Press the Paper Source l button to select Roll Auto Cut Off 
. 
2. Press the Enter  button.
3. The printer automatically feeds the paper to the cutter guide, 
and the printer becomes offline. Pause appears on the LCD.
4. If necessary, adjust the cutting position by using the Paper 
Feed d button or Paper Feed u button.
5. Cut the paper along the cutter guide using the manual cutter 
unit.
 
						

							132Printing with Mac OS 9.x 6. After cutting the paper, press the Pause   button. The printer 
becomes online.
Making the Orientation setting
You can specify the direction of printing on the page.
PortraitPrint direction is short edge first, like most magazines.
LandscapePrint direction is long edge first, like many 
spreadsheets.
Rotated by 180 
degreesPrints your document upside down.
Note:
This function is not available when Roll Paper (Banner) 
is selected as the Paper Source setting.
 
						

							Printing with Mac OS 9.x133
2
2
2
2
2
2
2
2
2
2
2
2
English
Making the Reduce or Enlarge setting
You can enlarge or reduce the size of data while maintaining its 
aspect ratio. You can enter any number from 25 to 400 in the 
Reduce or Enlarge box.
Making the Printable Area settings
This setting is available when you select Sheet as the Paper 
Source setting. You can make the following settings.
Centered
Select this setting to center printouts.
 
						

							134Printing with Mac OS 9.x
Making the Roll Paper Option settings
This option is available when you select Roll Paper or Roll Paper 
(Banner) as the Paper Source setting. You can make the following 
settings.
Auto Rotate
Note:
This function is available only when Roll Paper is selected as the Paper 
Source setting.
This function is effective only when the print data length is shorter 
than the printable width of the roll paper. The print data will 
automatically be turned 90 degrees to print crosswise, saving roll 
paper.
Original Auto Rotate onAuto Rotate off
 
						

							Printing with Mac OS 9.x135
2
2
2
2
2
2
2
2
2
2
2
2
English
To enable this function, select Auto Rotate.
Print Page Line
This function lets you specify whether to print a page line on the 
right side and also below the printed data for manual cutting. To 
enable this function, select Print Page Line. 
The Print Page Line operation changes according to the Auto Cut 
setting. Check these settings as necessary by referring to the 
printer’s operation.
Save Roll Paper
Note:
This function is available only when Roll Paper (Banner) is selected 
as the Paper Source setting.
This function is effective if you wish to save roll paper, because 
blank portion of the last page or your printed data is not fed 
through the printer. To enable this function, select Save Roll 
Paper.
Auto Cut Print Page Line Printer’s Operation
Single Cut
Double Cut
Normal CutSelected Prints page line on the right side 
only, and cuts paper 
automatically after the print job.
Single Cut
Double Cut
Normal CutNot selected Does not print page line, and 
cuts paper automatically after 
the print job.
Off Selected Prints page lines on the right side 
and below the printed data, but 
does not cut paper 
automatically after the print job.
Off Not selected Does not print page lines or cut 
paper automatically after the 
print job.
 
						

							136Printing with Mac OS 9.x
Making Settings in the Layout Dialog
You can make the Fit to Page and Print Order settings in this 
dialog.
Note:
❏The functions on the Layout menu are not available when Roll 
Paper (Banner) is selected as the Paper Source setting.
❏According to the paper source you choose, some of the functions are 
not available.
 
						

							Printing with Mac OS 9.x137
2
2
2
2
2
2
2
2
2
2
2
2
English
Making the Fit to Page setting
You can enlarge or reduce the size of the data proportionally to 
make it fit the paper size you selected in the Paper Size pull-down 
menu. To use this function, select Fit to Page, and select the paper 
size you loaded in the printer in the Output Paper Size pull-down 
menu.
 
						

							138Printing with Mac OS 9.x
Making Print Order settings
You can specify the printing order for your print job. When 
printing multiple copies of your document, select Collate to print 
one complete document set at a time. Select Reverse Order to 
print your documents in reverse order, starting with the last page.
 
						

							Printing with Mac OS 9.x139
2
2
2
2
2
2
2
2
2
2
2
2
English
Using the Printer Utilities
The EPSON printer utilities let you check the current printer 
status and perform printer maintenance from your screen. 
Note:
❏Do not use the Nozzle Check, Head Cleaning, or Print Head 
Alignment utilities if your printer is connected to your computer 
through a network.
❏Do not use the Nozzle Check, Head Cleaning, or Print Head 
Alignment utilities while printing is in progress; otherwise, your 
printout may be marred.
EPSON StatusMonitor
This utility provides you with printer status information, such as 
the amount of remaining ink. 
Nozzle Check
This utility checks the print head nozzles for clogging. Check the 
nozzles when you notice the print quality has declined and after 
cleaning to confirm that the print head nozzles have been cleared. 
See “Checking the print head nozzles” on page 140.
 
						

							140Printing with Mac OS 9.x If you click Auto in the Nozzle Check dialog, or turn on AUTO 
CLEANING from the control panel on the printer, this utility not 
only checks the clogging nozzles, but also performs head cleaning 
automatically.
Head Cleaning
This utility cleans the print head. You may need to clean the print 
head if you notice the print quality has declined. Use this utility 
to perform head clean. See “Cleaning the print head” on page 142.
Print Head Alignment
This utility can be used to improve the print quality of your 
printed data. The alignment of the print head may need to be 
adjusted if vertical lines appear out of alignment or if white or 
black banding noise appear in your printed data. Use this utility 
to realign the print head. See “Aligning the print head” on page 
143.
Configuration
Clicking this button opens the Configuration Settings dialog, 
where you can change the way the EPSON Status Monitor utility 
notifies you when the printer status changes. See “Making 
Configuration Settings” on page 146.
Checking the print head nozzles
If you find that the printed data is unexpectedly faint or dots in 
the printed data are missing, you may be able to identify the 
problem by checking the print head nozzles by using the Nozzle 
Check utility. 
To use the Nozzle Check utility, follow the steps below.