Epson Stylus Pro 7400 User Manual

							Printing with Mac OS 9.x121
2
2
2
2
2
2
2
2
2
2
2
2
English
Making the Copies setting
You can specify the number of copies. Type the number you want 
in the Copies box, or click the arrows next to the box. You can 
enter any number from 1 to 9999.
Making the Pages setting
You can specify the range or printed pages. Select either All or 
Range. If you select Range, enter the appropriate range of pages 
in the Range text box.
Setting the print time
You can specify the time you want the printer to begin printing 
your data. 
 
						

							122Printing with Mac OS 9.x To set the print time, follow the steps below.
1. Click  Background Printing, if necessary.
2. Select On as the Background Printing, if necessary.
3. Select Urgent, Normal, Print at, or Hold as the Print Time 
setting. If you select Print at, use the arrows beside the date 
and time boxes to specify the date and time that you want to 
print the data.
Note:
Make sure that the computer and printer are turned on at the date 
and time you specify.
4. Click OK. 
5. In the Print dialog, make sure that your print settings are as 
you want them, and click Print.
Previewing your printout
You can see how your data will look before printing it. To preview 
your data, follow the steps below.
1. Make your printer driver settings.
2. Click  Preview. The Print button changes into the Preview 
button.
 
						

							Printing with Mac OS 9.x123
2
2
2
2
2
2
2
2
2
2
2
2
English
3. Click Preview. The Preview dialog appears, and displays a 
preview of your data.
The Preview dialog contains several icon buttons that you can 
use to perform the following functions.
Zoom Click this button to enlarge or reduce the size 
of the previewed page.
Show/Hide 
Printable 
AreaClick this button to display or hide the 
borderlines which indicate the printable area. 
The printer cannot print anything which is 
outside of this area.
Add  page Click these buttons to add or remove selected 
pages from the list of pages to be printed.
Remove 
page
 
						

							124Printing with Mac OS 9.x 4. If you are satisfied with the previewed data, click Print. If you 
are not satisfied with the appearance of the data, click 
Cancel. The Preview and Print dialogs close with the current 
print settings preserved. Open the Print dialog again to make 
additional changes to the print settings.
Making Settings in the Page Setup Dialog
You can make the Paper Size, Paper Source, Borderless, Auto Cut, 
Orientation, Reduce or Enlarge, Printable Area, and Roll Paper 
Option settings in this dialog.
Making the Paper Sizes setting
You can select the paper size that you want to use. Select the paper 
size in the Paper Size pull-down menu.
You can also add a customized paper size. To do this, follow the 
steps below.
 
						

							Printing with Mac OS 9.x125
2
2
2
2
2
2
2
2
2
2
2
2
English
1. Click Customize. The following dialog appears.
2. To define a new paper size, click New.
3. Type a unique name for the paper size in the paper size list.
4. Specify the measurement unit as either cm or inch.
5. Enter the width and height of your paper by typing the text 
in the appropriate text boxes.
Note:
The maximum paper height is 90.55 inches (230 cm).
6. Specify the margins by typing in the Margin text boxes or by 
manipulating the preview image.
7. Click OK to return to the Page Setup dialog.
Making the Paper Source setting
You can select Roll Paper, Roll Paper (Banner), or Sheet from 
the Paper Source pull-down menu. Select one that matches the 
paper loaded in the printer.
 
						

							126Printing with Mac OS 9.x
Making the Borderless setting
You can print your data without margins on paper. 
For this printing mode, Epson recommends the following media 
conditions.
Accommodate media width:
* for EPSON Stylus Pro 9800/9400 use only.
Note:
❏If your application has margin settings, make sure they are set to 
zero before printing.
❏When printing on cut-sheet media, only the left and right margins 
are set to zero. The top margin is always 3 mm, and the bottom 
margin is always 14 mm. The back side of the paper may smear. ❏10 inch, 254 mm
❏300 mm
❏13 inch, 329 mm (Super A3/B)
❏16 inch, 406.4 mm
❏17 inch, 431.8 mm
❏515 mm (B2)
❏594 mm (A1)
❏24 inch, 609.6 mm
❏728 mm (B1)*
❏36 inch, 914.4 mm*
❏44 inch, 1117.6 mm*
 
						

							Printing with Mac OS 9.x127
2
2
2
2
2
2
2
2
2
2
2
2
English
❏The ink may contaminate the platen of the printer. In this case, wipe 
the ink away using a cloth.
❏Printing with this feature takes longer time than normal printing.
❏When Premium Glossy Photo Paper (250) roll paper or Premium 
Semigloss Photo Paper (250) roll paper is used in printing, the top 
margin is always 20 mm.
❏The following media may smear in the top area when selecting 
Single Cut or Double Cut for the Auto Cut setting: 
Doubleweight Matte Paper, Singleweight Matte Paper, Enhanced 
Matte Paper, Textured Fine Art Paper, and UltraSmooth Fine Art 
Paper.
❏Smear may result in the top and bottom areas depending on the 
media.
To print your data with this feature, follow the steps below.
1. Select Borderless.
 
						

							128Printing with Mac OS 9.x 2. Click the Expansion button. The following dialog appears.
3. Choose Auto Expand or Retain Size from the pull-down 
menu.
Auto ExpandSelect this setting if you want to enlarge the size of 
print data automatically and print with no margins. 
You can choose the amount of enlargement by 
moving the slider.
Note:
Enlarged areas that exceed the paper size will not 
be printed on the paper.
Retain SizeSelect this setting if you do not want to change the 
ratio of your print data.
If you select this setting, you need to enlarge your 
image data to exceed the paper width, to avoid 
unprinted areas appearing along the left and right 
edges. Enlarging 3 mm in both the left and right 
directions is recommended, using the application 
that created the data.
To use this feature, see “Making the Paper Sizes 
setting” on page 124.
 
						

							Printing with Mac OS 9.x129
2
2
2
2
2
2
2
2
2
2
2
2
English
4. Make the Auto Cut setting. See “Making the Auto Cut setting” 
on page 129.
5. Click OK.
6. Start printing your data from your application.
Making the Auto Cut setting
This setting is available only when Roll Paper or Roll Paper 
(Banner) is selected as the Paper Source setting. You can select 
how the paper is cut after printing. 
Single Cut
Select this setting if you want to save paper. 
If you select this setting, the boundary of a picture or the boundary 
of a page is cut. However, the cut position may shift slightly.
Amount of 
EnlargementWhen you select Auto Expand, the slider becomes 
available. Using the slider, you can control the 
amount of the image that extends beyond the 
edges of the paper during borderless printing.
For most print jobs, Standard is recommended in 
order to eliminate margins on all sides of the paper.
In a very humid environment, the width of paper may 
expand due to moisture absorption. In this case, 
move the slider to Max to eliminate margins around 
the image. If Max is selected, the center of the image 
may move about 1 mm to the right.
Moving the slider towards Min decreases the amount 
of the image enlargement; however, as this amount 
decreases, margins may appear on one or more 
sides of the paper.
 
						

							130Printing with Mac OS 9.x Note:
This setting appears only when the Borderless check box is selected.
Double Cut
Select this setting to avoid the slight gap that occurs with the 
Single Cut setting. A margin is created between pictures, and 
1 mm along the inside of each picture is cut.
Note:
This setting appears only when the Borderless check box is selected.