Epson Projector Emp 8300 User Manual

80
Using the Configuration Menu Functions Using the Configuration Menu Functions
Setting Menu
P in P Keystone
No-Signal Msg.OFFS-Video
MessageONOFFBlackBlue
A/V MuteLogo BlackBlue
Video
Audio
Setting
Users Logo
Advanced1:
:
:
:
:
[Menu]: Exit
[    ]: Enter [    ]: Select
Reset All About Advanced2 Effect
V-Keystone
Quick Corner
Adjust
Reset
Execute Sleep ModeONOFF
:
Computer1 Input
Computer2 Input
BNC Input
Composite
Logo
Select [                     ]
Analog-RGB
Select [Analog-RGB  ]
[Analog-RGB  ]Select...

81
Using the Configuration Menu Functions Using the Configuration Menu Functions
Computer2 
InputSelects the video signal to match the device that is 
connected to the [Computer 2] port.Analog-RGB
BNC Input Selects the video signal to match the device that is 
connected to the [BNC] port.Analog-RGB
Sleep 
ModeSets the energy saving operation when no video signal is 
being input.
 When set to ON, projection stops automatically and after 
the cool-down
 period is finished, the projector changes 
to sleep...

82
Using the Configuration Menu Functions Using the Configuration Menu Functions
Users Logo Menu
Execute
Video
Audio
Effect
Users Logo
Advanced1
About
Reset All
[    ]: Execute[Menu]: Exit
[    ]: Select
SettingAdvanced2
Sub-menu
Function
Default
Execute Records a users logo.   p.129
 Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel, and 
then follow the instructions that appear on the screen.EPSON logo 

83
Using the Configuration Menu Functions Using the Configuration Menu Functions
Advanced1 Menu
Standby Mode
:
Startup ScreenONOFF
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Progressive
Color Adjustment
Color Temp.RGB
Rear Proj.LanguageSelect[English]ResetExecute
Adjust
ONOFFOFF: :
:
CeilingONOFF
:
[Menu]: Exit
[    ]: Enter [    ]: Select
EffectAdvanced2
Black Level
White Level
+
-+
-
    0
    0Network ONNetwork OFF: :
Video
Film/Auto
Sub-menu
Function
Default
Startup 
ScreenSets...

84
Using the Configuration Menu Functions Using the Configuration Menu Functions
Color 
Adjustment
Adjusts the colour temperature
 and intensity of each RGB 
(red, green, blue) colour for each input source.
Color Temp.: Lets you adjust bright colours within a range 
from reddish tinges to bluish tinges.
If the colour temperature is lower, colours 
appear reddish and colour tones appear 
softer.
If the colour temperature is higher, colours 
appear bluish and colour tones appear 
sharper.
Press the...

85
Using the Configuration Menu Functions Using the Configuration Menu Functions
Ceiling Use when installing the projector on a ceiling.
When set to ON, the projected images are rotated 180° 
and are horizontally and vertically reversed.OFF
Standby 
ModeSet to Network ON to use network monitoring and 
control functions and the standby monitor out function 
while the projector is in standby mode.
When this setting is changed, turn the power off, and when 
the cool-down
 period has finished, the new...

86
Using the Configuration Menu Functions Using the Configuration Menu Functions
Advanced2 Menu
Brightness ControlHighLow
:
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Projector ID
NetworkReset
Execute
: 1
[Menu]: Exit
[    ]: Enter [    ]: Select
EffectAdvanced2
COM Port
BNC Sync Termination
:
ONOFF:
Set
Set
RS-232CUSB
Auto Setup
ONOFF
:
Sub-menu
Function
Default
Brightness 
ControlThis lets you set the lamp brightness to one of two settings.
Select Low if the images being projected are too...

87
Using the Configuration Menu Functions Using the Configuration Menu Functions
Reset Resets all adjustments values for the Advanced2 menu 
functions except for the Projector ID and Network 
settings to their default settings.
 Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel to 
reset.
 Select Reset All to reset all menu settings – including 
settings for the Video and Audio menus – to their 
default settings.   p.89-
Sub-menu
Function
Default 

88
Using the Configuration Menu Functions Using the Configuration Menu Functions
 The About menu shows the setting details for the current input signal.
 The Lamp item appears as 0H for 0–10 hours, and after that it appears in units of 1 hour.
About MenuComputer (Analogue RGB, Digital RGB)/
Component Video
 (YCbCr
, YPbPr
)/
RGB Video
Video (Composite Video
, S-Video
)
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
Frequency Source
V ---.---Hz Reset Lamp Timer
H ---.---kHz Lamp0H
SYNC Mode...

89
Using the Configuration Menu Functions Using the Configuration Menu Functions
Reset All Menu
Execute
Video
Audio
Setting
Users Logo
Advanced1
About
Reset All
[    ]: Execute[Menu]: Exit
[    ]: Select
EffectAdvanced2
Sub-menu
Function
Default
Execute Resets all items in all configuration menus to their default 
settings.
 Press the [Enter] button on the remote control or the 
[Auto/Enter] button on the projectors control panel to 
reset.
 Select Reset in an individual sub-menu such as the 
Video or...