Epson Projector Emp 8300 User Manual

50
Adjusting the Screen Image
When vertical keystone correction is carried out, the height of the projected 
images will become shorter. Use the height correction function to adjust 
the height of the projection area.
Adjustments using the height correction function are carried out using the 
configuration menus.
PROCEDURE
Press the [Menu] button on either the remote control 
or the projectors control panel. Then select Height 
from the Keystone sub-menu of the Setting menu.
The height correction screen...

51
Adjusting the Screen Image
Tilt the [ ] button on the remote control to the left or 
right, or press the [Tracking +] or [Tracking -] buttons 
on the projectors control panel to correct the height 
while viewing the projected images.When the adjustment is complete, press the [Menu] 
button on either the remote control or the projectors 
control panel to close the configuration menu.
2
[    ]: Select
[ ESC ]: Return
[Menu]: Exit
[    ]: Adjust
VideoVideoAudioudioSettingUsers LogoUsers...

52
Adjusting the Image QualityThe quality of the projected images can be adjusted as follows.Adjusting Computer Images
Automatic setup detects analogue RGB signals coming from a connected 
computer, and automatically adjusts these signals so that the optimum 
images can be obtained.
Automatic setup involves adjustment of the following three items: 
Tracking
, Position and Sync
. 
Automatic Setup
TIP
 If Auto Setup in the Advanced2 menu is set to OFF (the 
default setting for this command is ON),...

53
Adjusting the Image Quality
If vertical stripes appear in the projected images, 
and this cannot be fixed using automatic setup, 
you will need to adjust the tracking
 manually 
using the following procedure.
PROCEDURETracking adjustment can be carried out using either the projectors 
control panel or the configuration menus. This procedure explains 
how to use the projectors control panel to adjust the tracking.
For adjustment using the configuration menus: 
See Video - Tracking   p.73
Press the...

54
Adjusting the Image Quality
If flickering, fuzziness or interference appear in 
images that are input from the computer, and this 
cannot be fixed using automatic setup, you will 
need to adjust the sync
 manually using the 
following procedure.
PROCEDURESync adjustment can be carried out using either the projectors 
control panel or the configuration menus. This procedure explains 
how to use the projectors control panel to adjust the sync.
For adjustment using the configuration menus: 
See Video -...

55
Adjusting the Image QualitySelecting the Projection Quality (Colour Mode Selection)
The following five preset colour modes are available for use depending on 
the characteristics of the images that are being projected. You can easily 
obtain the optimum image quality simply by selecting the colour mode that 
corresponds to the projected images. The brightness of the images will 
vary depending on which colour mode is selected.
PROCEDURESelecting the colour mode can be carried out using either the...

56
Adjusting the VolumeYou can adjust the volume for the sound from the projectors built-in speaker 
or from the external speakers that are connected to the projector.
PROCEDUREThe volume can be adjusted using either the remote control, the projectors 
control panel or the configuration menus. This procedure explains how to 
use the remote control and the projectors control panel to adjust the 
volume.
For adjustment using the configuration menus: 
See Audio - Volume   p.78Press the [Volume] button on...

Advanced OperationsThis chapter describes functions for enhancing the projection of images, and how to use the configuration menus.Functions for Enhancing Projection ................. 58
 A/V Mute Function .............................................................58
 Freeze Function ...................................................................59
 E-Zoom Function ................................................................ 59
 P in P (Picture in Picture) Function...

58
Functions for Enhancing ProjectionThis section describes the various useful functions that can be used to enhance 
presentations.A/V Mute Function
This function momentarily pauses the images and sound.
For example, it can be used when you do not wish to show details of 
operations such as selecting different files while computer images are 
being projected.
However, if you use this function when projecting moving images, the 
images and sound will still continue to be played back by the source, and...

59
Functions for Enhancing Projection Functions for Enhancing ProjectionFreeze Function
This function pauses only the projected images. The sound keeps playing 
without pausing.
The signal source will still be playing back the images even while 
projection is paused, and so it will not be possible to resume projection 
from the point where it was paused.PROCEDUREPress the [Freeze] button on the remote control.
The images will then be paused.
To continue projecting the images, press the [Freeze] button...