Epson Projector Emp 8300 User Manual
Here you can view all the pages of manual Epson Projector Emp 8300 User Manual. The Epson manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
40
Turning the Projector On
Tilt the [ ] button to select the images to be
projected.
Move the red box until the desired image is selected.Press the [Enter] button.
The selected images are then projected in the active window.
If you press the [Enter] button once more, the preview function
is cancelled and the images in the active window are projected.
To return to the images that were being projected before the
preview function was activated, press the [ESC] or [Preview]
button.
2
Computer1...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-40.png "Page 41
40
Turning the Projector On
Tilt the [ ] button to select the images to be
projected.
Move the red box until the desired image is selected.Press the [Enter] button.
The selected images are then projected in the active window.
If you press the [Enter] button once more, the preview function
is cancelled and the images in the active window are projected.
To return to the images that were being projected before the
preview function was activated, press the [ESC] or [Preview]
button.
2
Computer1...")
40 Turning the Projector On Tilt the [ ] button to select the images to be projected. Move the red box until the desired image is selected.Press the [Enter] button. The selected images are then projected in the active window. If you press the [Enter] button once more, the preview function is cancelled and the images in the active window are projected. To return to the images that were being projected before the preview function was activated, press the [ESC] or [Preview] button. 2 Computer1...
Page 42
![Page 42
41
Turning the Projector OffFollow the procedure below to turn the projector off.
PROCEDURE
Turn the power off for the signal sources that are
connected to the projector.
Check that the power for all connected components has been
turned off.Press the [Power] button on either the remote control
or the projectors control panel.
The following confirmation message will appear.
If you do not want to turn the power off, press a button other
than any of the following:
At the remote control: [Power], [ ],...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-41.png "Page 42
41
Turning the Projector OffFollow the procedure below to turn the projector off.
PROCEDURE
Turn the power off for the signal sources that are
connected to the projector.
Check that the power for all connected components has been
turned off.Press the [Power] button on either the remote control
or the projectors control panel.
The following confirmation message will appear.
If you do not want to turn the power off, press a button other
than any of the following:
At the remote control: [Power], [ ],...")
41 Turning the Projector OffFollow the procedure below to turn the projector off. PROCEDURE Turn the power off for the signal sources that are connected to the projector. Check that the power for all connected components has been turned off.Press the [Power] button on either the remote control or the projectors control panel. The following confirmation message will appear. If you do not want to turn the power off, press a button other than any of the following: At the remote control: [Power], [ ],...
Page 43
![Page 43
42
Turning the Projector Off
If not using the projector for a long period, unplug the
power cable from the electrical outlet.Set the [R/C] switch on the remote control to OFF.
Attach the lens cover.
Attach the lens cover to the lens when not using the projector, in
order to stop the lens from getting dusty or dirty.
4
CAUTION
Do not disconnect the power cable from the electrical outlet while the
indicator is flashing orange, otherwise operating problems may
result.5
TIP
If you leave the [R/C] switch...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-42.png "Page 43
42
Turning the Projector Off
If not using the projector for a long period, unplug the
power cable from the electrical outlet.Set the [R/C] switch on the remote control to OFF.
Attach the lens cover.
Attach the lens cover to the lens when not using the projector, in
order to stop the lens from getting dusty or dirty.
4
CAUTION
Do not disconnect the power cable from the electrical outlet while the
indicator is flashing orange, otherwise operating problems may
result.5
TIP
If you leave the [R/C] switch...")
42 Turning the Projector Off If not using the projector for a long period, unplug the power cable from the electrical outlet.Set the [R/C] switch on the remote control to OFF. Attach the lens cover. Attach the lens cover to the lens when not using the projector, in order to stop the lens from getting dusty or dirty. 4 CAUTION Do not disconnect the power cable from the electrical outlet while the indicator is flashing orange, otherwise operating problems may result.5 TIP If you leave the [R/C] switch...
Page 44
![Page 44
43
Adjusting the Screen ImageYou can correct and adjust the screen images in order to obtain the best
possible pictures.Adjusting the Image Size (Zoom Function)
The size of the projected images is basically determined by the distance
from the projector to the screen. p.16
The following procedures explain how to adjust the screen images once the
projector itself has been set up.
PROCEDUREPress the [Zoom] buttons on either the remote control or
the projectors control panel to adjust the images.
If a...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-43.png "Page 44
43
Adjusting the Screen ImageYou can correct and adjust the screen images in order to obtain the best
possible pictures.Adjusting the Image Size (Zoom Function)
The size of the projected images is basically determined by the distance
from the projector to the screen. p.16
The following procedures explain how to adjust the screen images once the
projector itself has been set up.
PROCEDUREPress the [Zoom] buttons on either the remote control or
the projectors control panel to adjust the images.
If a...")
43 Adjusting the Screen ImageYou can correct and adjust the screen images in order to obtain the best possible pictures.Adjusting the Image Size (Zoom Function) The size of the projected images is basically determined by the distance from the projector to the screen. p.16 The following procedures explain how to adjust the screen images once the projector itself has been set up. PROCEDUREPress the [Zoom] buttons on either the remote control or the projectors control panel to adjust the images. If a...
Page 45
![Page 45
44
Adjusting the Screen ImageFocusing the Screen Images (Focus Adjustment)
PROCEDUREPress the [Focus] buttons on either the remote control or
the projectors control panel.
Adjusting the Image Angle
If the projector is set up so that it is at a horizontal or vertical angle to the
screen, adjust as follows.
You can use the lens shift function to move the lens vertically in order to
adjust the vertical position of the lens. This can be used at times such as if
the screen is in a high position or the...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-44.png "Page 45
44
Adjusting the Screen ImageFocusing the Screen Images (Focus Adjustment)
PROCEDUREPress the [Focus] buttons on either the remote control or
the projectors control panel.
Adjusting the Image Angle
If the projector is set up so that it is at a horizontal or vertical angle to the
screen, adjust as follows.
You can use the lens shift function to move the lens vertically in order to
adjust the vertical position of the lens. This can be used at times such as if
the screen is in a high position or the...")
44 Adjusting the Screen ImageFocusing the Screen Images (Focus Adjustment) PROCEDUREPress the [Focus] buttons on either the remote control or the projectors control panel. Adjusting the Image Angle If the projector is set up so that it is at a horizontal or vertical angle to the screen, adjust as follows. You can use the lens shift function to move the lens vertically in order to adjust the vertical position of the lens. This can be used at times such as if the screen is in a high position or the...
Page 46
![Page 46
45
Adjusting the Screen Image
If the projector cannot be set up directly in front of the screen, you can
project images at a horizontal angle to the screen. If keystone distortion
appears in the images, you can use the projectors Quick Corner function
to correct this keystone distortion. p.47
The vertical position of the projection area can be adjusted by moving the
lens up or down.
PROCEDUREPress the [Lens Shift] buttons on either the remote control
or the projectors control panel.If you press...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-45.png "Page 46
45
Adjusting the Screen Image
If the projector cannot be set up directly in front of the screen, you can
project images at a horizontal angle to the screen. If keystone distortion
appears in the images, you can use the projectors Quick Corner function
to correct this keystone distortion. p.47
The vertical position of the projection area can be adjusted by moving the
lens up or down.
PROCEDUREPress the [Lens Shift] buttons on either the remote control
or the projectors control panel.If you press...")
45 Adjusting the Screen Image If the projector cannot be set up directly in front of the screen, you can project images at a horizontal angle to the screen. If keystone distortion appears in the images, you can use the projectors Quick Corner function to correct this keystone distortion. p.47 The vertical position of the projection area can be adjusted by moving the lens up or down. PROCEDUREPress the [Lens Shift] buttons on either the remote control or the projectors control panel.If you press...
Page 47
46 Adjusting the Screen Image You can extend or retract the front adjustable feet to tilt the projector to adjust the upward projection angle within a maximum range of 9º. PROCEDUREWhile pulling the two foot adjust levers at either side, lift up the front of the projector so that the front adjustable feet can extend. Extend the front adjustable feet until the desired angle is obtained, and then release the foot adjust levers. To retract the front adjustable feet, gently push down on the projector...
Page 48
47 Adjusting the Screen ImageCorrecting Distortion in the Projection Area (Keystone Correction) The projector is equipped with the following two functions for correcting keystone distortion. Use whichever function is effective for correcting the distortion. Quick Corner: This correction function is used when both horizontal and vertical keystone distortion occurs in the projection area to adjust the projection area so that it fits the screen exactly. Vertical keystone: This correction function...
Page 49
![Page 49
48
Adjusting the Screen Image
PROCEDURE
Press the [Menu] button on either the remote control
or the projectors control panel, and then select
Quick Corner from the Keystone sub-menu of the
Setting menu.
The Quick Corner correction screen will be displayed.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel to
select the correction angle in the screen.Tilt the [ ] button on the remote control, or press the
[Sync +], [Sync -], [Tracking +] and...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-48.png "Page 49
48
Adjusting the Screen Image
PROCEDURE
Press the [Menu] button on either the remote control
or the projectors control panel, and then select
Quick Corner from the Keystone sub-menu of the
Setting menu.
The Quick Corner correction screen will be displayed.
Press the [Enter] button on the remote control or the
[Auto/Enter] button on the projectors control panel to
select the correction angle in the screen.Tilt the [ ] button on the remote control, or press the
[Sync +], [Sync -], [Tracking +] and...")
48 Adjusting the Screen Image PROCEDURE Press the [Menu] button on either the remote control or the projectors control panel, and then select Quick Corner from the Keystone sub-menu of the Setting menu. The Quick Corner correction screen will be displayed. Press the [Enter] button on the remote control or the [Auto/Enter] button on the projectors control panel to select the correction angle in the screen.Tilt the [ ] button on the remote control, or press the [Sync +], [Sync -], [Tracking +] and...
Page 50
![Page 50
49
Adjusting the Screen Image
When the correct is complete, press the [Menu]
button on either the remote control or the projectors
control panel.
Vertical keystone correction can be carried out using either the projectors
control panel or the configuration menus. This procedure explains how to
use the projectors control panel to correct keystone distortion.
For adjustment using the configuration menus:
See Setting - Keystone - V-Keystone p.80PROCEDURE
TIP
If you hold down the [Shift] button on...](http://img.usermanuals.tech/thumb/23/89719/w300_epson-emp-8300-manual_d-49.png "Page 50
49
Adjusting the Screen Image
When the correct is complete, press the [Menu]
button on either the remote control or the projectors
control panel.
Vertical keystone correction can be carried out using either the projectors
control panel or the configuration menus. This procedure explains how to
use the projectors control panel to correct keystone distortion.
For adjustment using the configuration menus:
See Setting - Keystone - V-Keystone p.80PROCEDURE
TIP
If you hold down the [Shift] button on...")
49 Adjusting the Screen Image When the correct is complete, press the [Menu] button on either the remote control or the projectors control panel. Vertical keystone correction can be carried out using either the projectors control panel or the configuration menus. This procedure explains how to use the projectors control panel to correct keystone distortion. For adjustment using the configuration menus: See Setting - Keystone - V-Keystone p.80PROCEDURE TIP If you hold down the [Shift] button on...