Epson Projector Emp 8300 User Manual

100
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
If the name of the projector that you would like to set up mail notification 
for does not appear in the window, use the following procedure to 
manually connect the projector.
PROCEDURE
Start EMP NetworkManager.Double-click [Projector address selection] in the 
projector list display area.
The following IP Address Setup window will be 
displayed.
You should make the following settings when manually...

101
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
A projector list that has already been recorded by EMP Monitor can also 
be shared by EMP NetworkManager.
PROCEDURE
Start EMP NetworkManager.The projectors that have been recorded will be 
displayed in the projector list display area.Click [Import].
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click 
[Open]. A list of the projectors that have been...

102
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
PROCEDURE
With Windows running, click [Start], point to 
[Programs] (or [All Programs]), point to [EPSON 
Projector] and then click [EMP Monitor].
EMP Monitor will start up.If EMP Monitor is being started up for the first time 
after it was installed, or if you would like to register 
additional projectors, click the [Register projector] 
icon. If all projectors are already registered and you 
do not...

103
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
Select the projector to be monitored or controlled and 
then click [Add].If there are other projectors that you would like to 
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been 
added, click [Close].
The display will return to the Register projector window, and 
the names of the added projectors will appear in the projector 
list.Once all target projectors...

104
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The statuses of the registered projectors will each be 
displayed.
Once a projector has been registered, the status of the projector 
will be displayed automatically each time EMP Monitor is 
started from then on.
The following table shows the display details.
Status : 
The projector statuses are indicated by means of the following 
icons.
Power ON with no problems
Power OFF with no problems
Power ON...

105
Projector Monitoring and Control using a Network Projector Monitoring and Control using a Network
The power for all registered projectors can be turned 
on and off at the same time, and the input signal for 
all projectors can also be selected at the same time. 
Select the projectors for which the operation is to be 
carried out and then click the desired operation 
button.
If you would like to select all projectors, click [Select All]. 
Furthermore, you can also use the same operations as selecting...

TroubleshootingThis chapter describes how to identify problems and what to do if a problem is found.Using the Help ................................................... 107
Problem Solving................................................ 109
 Reading the Indicators...................................................... 109
 When the Indicators Provide No Help ............................ 112 Problems relating to images .................................................... 113
 Problems relating to...

107
Using the HelpIf a problem occurs with the projector, the Help function uses on-screen 
displays to assist you in solving the problem. It uses a series of menus in a 
question and answer format.
PROCEDURE
Press the [Help] button on either the remote control 
or the projectors control panel.
The help menu will be displayed.Select a menu item.
If using the remote control, tilt the [ ] button up or down to 
select a menu item.
If using the projectors control panel, press the [Sync +] or 
[Sync -] button...

108
Using the Help Using the Help
Repeat steps 2 and 3 to proceed through the menu to 
more detailed items.
The help menu is cleared when the [Help] button is pressed.
4
No image appears on the screen.
The image is not displayed fully on the screen.
(cut off/ too big/ too small/ partial)
The color of the image is abnormal .
The image is too dark.
The image is distorted. The image is not in focus.
The image is disturbed.Help Menu
[    ]: 
Enter
[ESC]: 
Return  
[    ]: 
Select
[    ]: 
Exit
TIP
If the...

109
Problem SolvingIf you are having a problem with the projector, first check the projectors indicators while referring to Reading the Indicators below.
If the indicators do not show clearly what the problem might be, refer to When the Indicators Provide No Help.    p.112Reading the Indicators
The projector is provided with the following three indicators. These indicators notify you of the operating status of the projector.
The following tables show what the indicators mean and how to remedy the...