Epson Powerlite Pro Z8050wnl Users Guide

List of Functions
71
Settings Menu
Sub Menu
Function
KeystoneYou can correct keystone distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone.
Use the [w/], [v/], [/ ] buttons on the control panel to perform similar corrections to V-Keystone and 
H-Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. sp.40
Control Panel LockYou can use this to restrict operation of the projector's Control panel. sp.62
Lens...

List of Functions
72
User ButtonYou can assign selected items from the configuration menu to the Remote Control's [User] button. By pressing the [User] button, 
the assigned menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can 
assign one of the following six items to the [User] button.
Power Consumption, Info, Progressive, Test Pattern, Multi-screen, and Resolution
Test PatternWhen the projector is setup, a Test Pattern is displayed so that...

List of Functions
73
Extended Menu
Sub Menu
Function
DisplayYou can make settings related to the projector's display.
Messages: The following messages are not displayed on the screen when this item is set to Off. 
Overheating and other warnings, messages such as when there is no video input, and when Freeze is On or when changing Source, 
Color Mode or Aspect.
Display Background
*1: You can set the screen status for when no image signal is available to Black, Blue, or Logo.
Startup Screen
*1: You can...

List of Functions
74
Operation Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
Be careful when this item is set to On because this unit turns on at the time of power recovery with this unit plugged-in to an outlet.
Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried 
out.
Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a...

List of Functions
75
*1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed. You can make changes after setting User's Logo 
Protect to Off. sp.60
*2 Except for High Altitude Mode and Remote Control Type. 
Network Menu (PowerLite Pro Z8000WUNL)
For information on the PowerLite Pro Z8050WNL Network menu, see sp.78.Multi-screenWhen this is set to On, you can adjust the hue and brightness of images projected from a row of the several...

List of Functions
76
When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting 
Network Protect to Off. sp.60
Sub Menu
Function
Wired LANYou can make network settings.
DHCP: You can set whether or not (On/Off) to use DHCP.
If this is set to On you cannot set any more addresses.
IP Address: You can input the IP address assigned to the projector.
*
You can enter a number from 0 to 255 in each field of the address....

List of Functions
77
Web Control PasswordSet a password to use when making settings and controlling the projector using Web Control.
* You can enter up to 8 single-byte 
alphanumeric characters.
Web control is a function that allows you to set up and control the projector using your computer’s web browser. For more 
information, see the EasyMP Monitor Operation Guide. 
SNMPYou can make SNMP settings.
Trap IP Address 1/Trap IP Address 2: You can register up to two addresses as the SNMP trap notification...

List of Functions
78
* When inputting numbers and passwords, the following software keyboards are displayed. Use the [h] button on the remote control to move the cursor to the target 
key, and then press the [Enter] button. Enter figures by holding down the [Num] button on the Remote Control and pressing the numeric buttons. After inputting, 
select Finish on the keyboard to confirm your input. Select Cancel on the keyboard to cancel your input.
Network Menu (PowerLite Pro Z8050WNL)
For information on...

List of Functions
79
When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting 
Network Protect to Off. sp.60
By using the Web browser of a computer connected to the projector on a network, you can set the projector's functions and control the projector. This 
function is called "Web control". You can easily enter text using a keyboard to make settings for Web control such as security settings. See your...

List of Functions
80
Notes on operating the network menu
Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the configuration menu.
When done, make sure you go to the Setup complete, and select Yes, No, or Cancel. When you select Yes or No, you return to the configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Exits to the Network menu without saving the settings.
Cancel: Continues displaying the Network menu.