Epson Powerlite Pro Z8050wnl Users Guide

Functions for Enhancing Projection
51
NativeProjects at the resolution of the input 
image size to the center of the screen. 
This is ideal for projecting clear 
images.
If the image resolution exceeds the 
panel resolution of your projector, the 
edges of the image are not projected.When an 800x600 signal is input When an 2048x1536 signal is input
Set Values
Operation
Projection example 

Functions for Enhancing Projection
52
Pointer Function (Pointer)
This allows you to move a Pointer icon on the projected image, and helps 
you draw attention to the area you are talking about.
ProcedureA
Display the Pointer.
Each time you press the button, the pointer appears or disappears.
B
Move the Pointer icon ( ).
You can choose from three different kinds of Pointer icon ( ,  , 
or ) in Settings - Pointer Shape from the configuration menu.
Remote Control
Remote Control 

Functions for Enhancing Projection
53
Enlarging Part of the Image (E-Zoom)
This is useful when you want to expand images to see them in greater 
detail, such as graphs and tables.
ProcedureA
Start E-Zoom. 
B
Move the  ( ) to the area of the image that you want to 
enlarge. 
Remote Control
Remote Control 

Functions for Enhancing Projection
54
C
Enlarge. 
Each time the button is pressed, the area is expanded. You can ex-
pand quickly by holding the button down.
You can reduce the enlarged image by pressing the [x] button.
Press the [Esc] button to cancel. 
The enlargement ratio appears on the screen. The selected area can 
be enlarged to between 1 to 4 times in 25 incremental steps.
Use the [h] button to scroll through the enlarged image.
If E-Zoom is selected, Progressive and Noise Reduction are can-...

Limitation of the Number of the Target Projectors when Using Multiple Projectors
55
Limitation of the Number of the Target Projectors when Using Multiple Projectors
When an ID is set for the projector and the remote control, you can use 
the remote control to operate only the projector with a matching ID. This 
is very useful when managing multiple projectors.
You can set an ID for the projector within a range of "1" to "9". The 
default value is Off.
You can set an ID for the remote...

Limitation of the Number of the Target Projectors when Using Multiple Projectors
56
Setting the Projector ID
ProcedureA
During projection, press the Menu button and select 
Extended - "Projector ID" from the configuration menu. 
B
Choose the ID you want to set and press the Enter button.
C
Press the [Menu] button to close the configuration menu.
Checking the Projector ID
Use the following procedure to check the projector ID.
ProcedureA
Set the remote control ID switch to On.
B
During projection,...

Limitation of the Number of the Target Projectors when Using Multiple Projectors
57
Setting the Remote Control ID
ProcedureA
Set the remote control ID switch to On.
B
While holding the [ID] button, press a number button to 
select a number to match the ID of the projector you want to 
operate.
Once this setting has been made, the projector that can be operated by 
the remote control is limited.The remote control ID setting is saved in the remote control. Even if the 
remote control batteries are removed...

Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
58
Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
When multiple projectors are lined up and projecting images, you can 
manually correct the brightness and color tone of each projector's image 
so that the colors projected from each projector match closely.
Set each projector to the same Color Mode before using the multi-screen 
color adjustment function.
In some cases the brightness and color tone may...

Correcting Color for Multiple Projectors (Multi-Screen Color Adjustment)
59
E
Correct the color using Color Correct. (G/R) and Color 
Correct. (B/Y).
Because each time the [Enter] button is pressed the image displayed 
changes between the pattern display and the actual image, you can 
check the correction results and make corrections in the actual im-
age.
F
Repeat steps 3 to 5 until corrections are finished.
G
When all corrections are finished, press the Menu button to 
close the configuration menu. 

Security Functions
60
Security Functions
The projector has the following enhanced security functions.
•Password Protect
You can limit who can use the projector.
•Control Panel Lock/Lens Operation Lock
You can prevent people changing the settings on the projector without 
permission. sp.62
•Theft Deterrent Lock
The projector is equipped with various types of theft deterrent security 
devices. sp.64
Managing Users (Password Protect)
When Password Protect is activated, people who do not know the 
Password...