Epson Powerlite Pro Z8050wnl Users Guide

List of Functions
91
Mail Menu
When this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents of the sent e-mail, 
sp.144
Sub Menu
Function
Mail NotificationYou can set whether or not (On/Off) to be notified by e-mail.
SMTP ServerYou can input the IP address
g for the SMTP server for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
127.x.x.x,...

List of Functions
92
Others Menu
Sub Menu
Function
Trap IP Address 1/Trap IP 
Address 2You can register up to two for the SNMP
g trap notification destination.
You can input a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
To use SNMP to monitor the projector, you need to install the SNMP manager program on your computer. SNMP should be 
managed by a network administrator....

List of Functions
93
Reset Menu
Resets all of the network settings.
Sub Menu
Function
Reset network settings.To reset all of the network settings, select Yes.
After you reset all the settings, the Basic menu appears. 

List of Functions
94
Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image 
signal being projected as shown in the following screen shots. 
Analog RGB/Digital RGB/
Component Video/Digital Component VideoComposite video/S-Video
Sub Menu
Function
Lamp HoursYou can display the cumulative lamp operating time
*.
When it reaches the lamp warning time, the characters are displayed in...

List of Functions
95
* The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H", "11H", etc.
Reset Menu
StatusThis is Info about errors that have occurred on the projector.
This information may be needed if service is required.
Serial NumberDisplays the projector's serial number.
Sub Menu
Function
Reset AllYou can reset all items in the configuration menu to their default settings.
The following items are not reset to their...

Projector Menu and Options List
96
Projector Menu and Options List
The table below summarizes the options you can select based on the 
projector menu you are viewing. Some options may not be available 
depending on the input source you are using.
For more information on these menus and options, read this chapter.
Menu
Options
Image Color Mode
Brightness
Contrast
Color Saturation
Tint
Sharpness
Abs. Color Temp.
Color Adjustment
Auto Iris
Reset
Signal Auto Setup
Resolution
Tracking
Sync.
Position...

Projector Menu and Options List
97
*1 PowerLite Pro Z8050WNL only
*2 PowerLite Pro Z8050WNL with optional Wireless 801.11a/b/g Module only
*3 PowerLite Pro Z8000WUNL onlyInfo Lamp Hours
Lamp Status
Source
Input Signal
Resolution
Video Signal
Refresh Rate
Sync Info
Status
Serial Number
Reset Reset All
Menu
Options 

98
Troubleshooting
This chapter explains how to identify problems and what to do if a problem is found.  

Using the Help Screen
99
Using the Help Screen
If a problem occurs with the projector, press the [Help] button to display 
the Help screen. You can solve problems by answering the questions. 
ProcedureA
Press the [Help] button. 
The Help screen is displayed.
B
Select a menu item. 
Remote Control
Remote Control 

Using the Help Screen
100
C
Confirm the selection. 
Questions and solutions are displayed as shown on the screen 
below.
Press the [Help] button to exit Help.
If the Help screen does not provide a solution to the problem, refer 
to "Problem Solving" p.101.
Remote Control