Epson Powerlite Pro Z8050wnl Users Guide

List of Functions
81
Soft keyboard operations
The Network menu contains items that require input of alphanumerics during setup. In this case, the following software keyboard is displayed. Use the 
[h] button on the remote control or [w/], [v/], [/ ] on the projector to move the cursor to the desired key, and then press the 
[Enter] button to enter the alphanumeric. Enter figures by holding down the [Num] button on the remote control, and pressing the numeric buttons. After 
inputting, select Finish on...

List of Functions
82
Basic Menu
Sub Menu
Function
Projector NameDisplays the projector name used to identify the projector when connected to a network.
 When editing, you can enter up to 16 single-byte alphanumeric characters.
PJLink PasswordSet a password to use when you access the projector using compatible PJLink software. sp.148
You can enter up to 32 single-byte alphanumeric characters.
Web Control PasswordSet a password to use when making settings and controlling the projector using Web Control....

List of Functions
83
Wireless LAN Menu (only when the optional Wireless 802.11a/b/g Module is installed)
Sub Menu
Function
Wireless LAN PowerSet to Off to deactivate the Wireless 802.11a/b/g Module connected to the projector. When set to Off, the Wireless 802.11a/b/g 
Module is treated as if it were not connected.
Connection modeWhen the projector is connected to a computer with EasyMP Network Projection, set so that it is in a permanently connected mode.
Wi-Fi Protected SetupWhen using a WPS (Wi-Fi...

List of Functions
84
Subnet MaskYou can input the Subnet Mask
g for the projector. You can input a number from 0 to 255 in each field of the address. However, the 
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway AddressYou can input the IP address for the gateway for the projector.
You can input a number from 0 to 255 in each field of the address. However, the following Gateway addresses
g cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0...

List of Functions
85
Security menu (Only available when the optional Wireless 802.11a/b/g/ Module is installed)
When the optional Wireless 802.11a/b/g Module is installed and being used in Manual Mode, it is strongly recommended that you set security.
Sub Menu
Function
SecuritySelect one of the following security methods.
When setting up security, follow the instructions from the administrator of the network system you are about to access.
WEP: Data is encrypted with a code key (WEP key)
This mechanism...

List of Functions
86
Type of security
•If using EAP, you need to make settings at the projector that match the authentication server settings. Check with your network administrator for details 
on RADIUS settings.
•Open “Network Menu” – “Certificate” in “Web Control” to register a digital certificate and a CA certificate to the projector. Only one set of a digital 
certificate and a CA certificate can be registered to the projector. These certificates are used with EAP-TLS.
When WEP is selected
System...

List of Functions
87
The following items can be set.
Sub Menu
Function
WEP encryptionYou can set the encryption for WEP encoding.
128 Bit: Uses 128 (104) bit encoding
64 Bit: Uses 64 (40) bit encoding
FormatYou can set the input method for the WEP encrypted key.
ASCII: Input text. The method of inputting the encrypted WEP with text differs depending on the access point. Check with the 
network administrator for the network in which the projector participates, and then set to "ASCII".
HEX: Input...

List of Functions
88
When WPA-PSK (TKIP) or WPA2-PSK (AES) are selected
The following items can be set.
When EAP-TLS is selected
The following items can be set.
Sub Menu
Function
PSK (Encryption key)You can enter a Pre-Shared Key (encrypted key) in single-byte alphanumeric characters. Enter at least 8 and up to 63 characters. 
When the Pre- Shared Key is entered and the Enter button is pressed, the value is set and displayed as an asterisk (*).
You cannot enter more than 32 characters on the...

List of Functions
89
When EAP-TTLS/MD5, EAP-TTLS/MS-CHAPv2, PEAP/MS-CHAPv2, PEAP/GTC, LEAP, EAP-Fast/MS-CHAPv2 or EAP-FAST/GTC are 
selected
The following items can be set.
Wired LAN Menu
Sub Menu
Function
User nameYou can enter a user name to be used for authentication in single-byte alphanumeric characters (no spaces). You can enter up to 
64 characters.
You cannot enter more than 32 characters on the configuration menu. When setting from Web Control, you can enter more than 
32 characters. See your...

List of Functions
90
IP AddressYou can input the IP address
g assigned to the projector.
You can input a number from 0 to 255 in each field of the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet MaskYou can input the Subnet Maskg for the projector. You can input a number from 0 to 255 in each field of the address. However, the 
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway...