Epson Powerlite Pro Z8050wnl Users Guide

Connecting the Projector to Your Equipment
31
Connecting to Video EquipmentConnecting to the HDMI Port
ProcedureA
Connect one end of your HDMI cable (not included) to the 
projector’s HDMI port, and the other end to the HDMI 
connector on your equipment.
B
Turn the projector on (sp.34), select the image source 
(sp.43), and adjust the image (sp.35).
Connecting to the DVI-D Port
ProcedureA
Connect one end of your DVI-D cable (not included) to the 
projector’s DVI-D port, and the other end to the DVI-D...

Connecting the Projector to Your Equipment
32
Connecting a Component Video Source
ProcedureA
Connect one end of your cable (not included) to either the 
projector’s BNC ports or Computer port (depending on the 
type of component video cable you’re using). Connect the 
other end of the cable to your equipment.
B
Turn the projector on (sp.34), select the image source 
(sp.43), and adjust the image (sp.35).
Make sure the Input Signal setting in the Signal menu is set to Auto or 
Component Video. sp.69...

Connecting the Projector to Your Equipment
33
Connecting a Composite Video Source
ProcedureA
Connect one end of your cable (not included) to the 
projector’s Video port, and the other end to your 
equipment.
B
Turn the projector on (sp.34), select the image source 
(sp.43), and adjust the image (sp.35). 

Turning the Projector On and Off
34
Turning the Projector On and Off
Turn off this product when not in use to prolong the life of the projector.
ProcedureA
Plug one end of the power cord into the projector, and the 
other end into an electrical outlet.
B
Remove the lens cover.
Warning:
When the lamp is on, never look into the lens or allow children or pets to look into the 
lens. This can damage your eyes, and is especially dangerous for children.
C
Press the [
t
] power button on the remote control or...

Adjusting the Image
35
Adjusting the ImageAdjusting the Position
ProcedureA
Press the [Lens Shift] button on the remote control or press 
the [Lens] button on the back of the projector until "Adjust 
Lens Shift" is displayed on the screen.
B
To adjust the position, use the [
h
] button on the remote 
control or the arrow buttons on the back of the projector as 
shown below.
Press the button repeatedly to make fine adjustments. Press and 
hold the button to make larger adjustments.
C
When you’re...

Adjusting the Image
36
Focusing the Image
ProcedureA
Press the [Focus] button on the remote control or press the 
[Lens] button on the back of the projector until "Adjust 
Focus" is displayed on the screen.
B
To adjust the focus, use the [
h
] button on the remote control 
or the arrow buttons on the back of the projector as shown 
below.
C
When you’re done, press the [Esc] button on the remote 
control or on the back of the projector.
Zooming the Image
ProcedureA
Press the [Zoom] button on the...

Adjusting the Image
37
Fixing a Tilted Image
If you’ve placed your projector on a table in front of the screen and the 
image is tilted as shown below, you can use the four adjustable feet to 
correct the tilt.  

38
Useful Functions
This chapter explains useful tips for giving presentations, and the Security functions.  

Correcting Distortion in the Projected Image
39
Correcting Distortion in the Projected Image
There are two ways to correct distortion in projected images.
•Quick Corner
This allows you to manually correct each of the four corners of the 
projected image separately. sp.40
We recommend using Quick Corner to accurately adjust keystone 
distortion.
•H/V-Keystone
This allows you to manually correct distortion in the horizontal and 
vertical directions independently. You can perform easy H/V-Keystone...

Correcting Distortion in the Projected Image
40
Correcting Distortion with Quick Corner
ProcedureA
Press the Menu button, and then from the configuration 
menu select Settings - Keystone. 
B
Select "Quick Corner", and then press the [Enter] button.
Press the [Enter] button again to display the selection screen from 
which you can select one of the four corners.
Using the Remote Control Using the Control panel