Epson Powerlite Pro Z8050wnl Users Guide

							List of Functions
71
Settings Menu
Sub Menu
Function
KeystoneYou can correct keystone distortion.
H/V-Keystone: Corrects horizontal and vertical keystone distortion. Select one of V-Keystone or H-Keystone.
Use the [w/], [v/], [/ ] buttons on the control panel to perform similar corrections to V-Keystone and 
H-Keystone.
Quick Corner: Selects and corrects the four corners of the projected image. sp.40
Control Panel LockYou can use this to restrict operation of the projector's Control panel. sp.62
Lens Operation LockYou can use this to restrict the lens operation of the remote control. sp.63
Pointer ShapeYou can select the shape of the pointer. sp.52
Pointer 1: Pointer 2: Pointer 3:
Power ConsumptionYou can set the Lamp brightness to one of two settings: Normal or ECO.
Select ECO if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. 
When ECO is selected, the amount of electricity consumed and the lamp's operating life are changed as follows, and the fan 
rotation noise during projection is reduced. Electrical consumption: about 16% decrease, lamp life: about 1.4 times longer
Remote ReceiverYou can limit the reception of the operation signal from the Remote Control.
When you want to prohibit operation by Remote Control, or if the Remote Receiver has a fluorescent light too close to it, you can 
make settings to deactivate the remote receiver you do not want to use or that is experiencing interference. 
						

							List of Functions
72
User ButtonYou can assign selected items from the configuration menu to the Remote Control's [User] button. By pressing the [User] button, 
the assigned menu item selection/adjustment screen is displayed, allowing you to make one-touch settings/adjustments. You can 
assign one of the following six items to the [User] button.
Power Consumption, Info, Progressive, Test Pattern, Multi-screen, and Resolution
Test PatternWhen the projector is setup, a Test Pattern is displayed so that you can adjust the projection without connecting other equipment. 
While the Test Pattern is displayed, zoom, focus adjustments, and Keystone correction can be performed.
To cancel the Test Pattern, press the [Esc] button on the Remote Control or the Control panel.
ResetYou can reset all adjustment values on the Settings menu to their default settings, except for User Button.
To return all menu items to their default settings, see sp.95
Sub Menu
Function 
						

							List of Functions
73
Extended Menu
Sub Menu
Function
DisplayYou can make settings related to the projector's display.
Messages: The following messages are not displayed on the screen when this item is set to Off. 
Overheating and other warnings, messages such as when there is no video input, and when Freeze is On or when changing Source, 
Color Mode or Aspect.
Display Background
*1: You can set the screen status for when no image signal is available to Black, Blue, or Logo.
Startup Screen
*1: You can set whether or not (On/Off) the Startup Screen (the registered User's Logo displays when starting the 
projector) is displayed.
Menu Size (PowerLite Pro Z8000WUNL only): You can select Normal or Larger for the display size of the configuration menu, Help, 
and other messages.
Closed CaptionYou can select CC1, CC2, or Off.
User's Logo
*1
You can change the User's Logo that is displayed as a background during Display Background or Startup Screen. 
ProjectionYou can select from the following according to the way the projector is installed. 
Front, Front/Upside Down, Rear, Rear/Upside Down
DirectionYou can select from the following according to the way the projector is installed. 
Normal, Pointing Up, Pointing Down 
						

							List of Functions
74
Operation Direct Power On: You can set whether or not (On/Off) to enable Direct Power On.
Be careful when this item is set to On because this unit turns on at the time of power recovery with this unit plugged-in to an outlet.
Sleep Mode: When set to On, this automatically stops projection when no image signal is being input and no operations are carried 
out.
Sleep Mode Timer: When Sleep Mode is set to On, you can set the time before the projector automatically turns off within a range 
of 1 to 30 minutes.
Shutter Timer: When set to On, this turns off the power automatically 120 minutes after the electric shutter is closed. Shutter 
Timer is set to On at the time of purchase. (When Shutter Time and Sleep Mode are set to On at the same time, Sleep Mode has 
priority.)
High Altitude Mode: Set to On when using the projector above an altitude of 4900 ft (1500 m).
BNC Sync Termination: Set the termination for the signal from the BNC input port. This should usually be set to Off. Set to On when 
analog (75Ω) termination such as for switchers is necessary.
Remote Control Type: You can select Normal or Simple depending on the type of remote control.
 Set this item to Normal to use the remote control provided with the projector. When Simple is selected, you can use the remote 
control provided with other Epson projectors to operate this projector. This is useful if you want to use a remote control that you 
are already familiar with to operate the projector. 
 However, you cannot use the remote control provided with the projector if this is set to Simple. Make sure you want to change this 
setting to Simple because, if the projector is mounted on the ceiling or somewhere hard to reach, changing it back may be difficult.
Standby ModeYou can use the functions that monitor and control the status of the projector over the network even when the projector is in 
standby mode if this is set to Communication On.
You can use SNMP to monitor and control the status of the projector over the network, or by using the EasyMP Monitor software 
supplied with this product.
Air Filter NoticeYou can set whether or not (On/Off) to enable the Air Filter Notice. When this is set to On and a clog in the air filter is detected, the 
message is displayed on the screen.
Projector IDSet the ID within a range of 1 to 9. Off indicates that no ID is set. sp.56
Sub Menu
Function 
						

							List of Functions
75
*1 When User's Logo Protect is set to On in Password Protect, settings relating to User's Logo cannot be changed. You can make changes after setting User's Logo 
Protect to Off. sp.60
*2 Except for High Altitude Mode and Remote Control Type. 
Network Menu (PowerLite Pro Z8000WUNL)
For information on the PowerLite Pro Z8050WNL Network menu, see sp.78.Multi-screenWhen this is set to On, you can adjust the hue and brightness of images projected from a row of the several projectors.sp.58
Adjustment Level: You can adjust from black to white in five stages called Level 1 to 5, and in each of these 5 levels you can adjust 
Brightness Correct. and Color Correct.
Brightness Correct.: Corrects the difference in the brightness of each projector.
Color Correct. (G/R) / Color Correct. (B/Y): You can correct the difference in the color of each projector.
When Multi-screen is set to On, Auto Iris does not work.
LanguageYou can set the Language for message displays.
ResetYou can reset Display
*1, Operation
*2, and Air Filter Notice from the Extended menu to their default settings.
To return all menu items to their default settings, see sp.95
Sub Menu
Function 
						

							List of Functions
76
When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting 
Network Protect to Off. sp.60
Sub Menu
Function
Wired LANYou can make network settings.
DHCP: You can set whether or not (On/Off) to use DHCP.
If this is set to On you cannot set any more addresses.
IP Address: You can input the IP address assigned to the projector.
*
You can enter a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.
0.0.0.0, 0.x.x.x, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Subnet Mask: You can input the subnet mask for the projector.
*
You can enter a number from 0 to 255 in each field of the address. However, the following Subnet Masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can input the IP address for the gateway for the projector.
*
You can enter a number from 0 to 255 in each field of the address. However, the following Gateway Addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
MAC Address: You can display the MAC address for the projector.
PJLink PasswordSet a Password to use when you access the projector using compatible PJLink software.
* 
You can enter up to 32 single-byte alphanumeric characters. 
						

							List of Functions
77
Web Control PasswordSet a password to use when making settings and controlling the projector using Web Control.
* You can enter up to 8 single-byte 
alphanumeric characters.
Web control is a function that allows you to set up and control the projector using your computer’s web browser. For more 
information, see the EasyMP Monitor Operation Guide. 
SNMPYou can make SNMP settings.
Trap IP Address 1/Trap IP Address 2: You can register up to two addresses as the SNMP trap notification destination.
*
To use SNMP to monitor the projector, you need to install an SNMP manager program on your computer. SNMP should be 
managed by a network expert.
MailWhen this is set, you receive an e-mail notification if a problem or warning occurs in the projector. For information on the contents 
of the sent email.
Mail Notification: You can set whether or not (On/Off) to be notified by e-mail. If this is set to Off you cannot set any more 
addresses.
SMTP Server: You can input the IP address for the SMTP server for the projector.
*
You can enter a number from 0 to 255 in each field of the address. However, the following IP Addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from 0 to 255)
Port Number: You can display the SMTP server's port number.
The default value is 25. When editing settings from Web Control, you can change Port Number by entering a valid number from 1 
to 65535.
Address 1 Setting/Address 2 Setting/Address 3 Setting: You can enter the e-mail address
* and the contents of the message to 
receive notification when a problem or warning occurs. You can register up to three destinations. You can enter up to 64 
single-byte alphanumeric characters for the e-mail addresses.
AMX Device DiscoveryWhen the projector is connected to a network, set this to On to allow the projector to be detected by AMX Device Discovery. Set 
this to Off if the projector is not connected to an environment controlled with a controller from AMX or AMX Device Discovery.
Projector NameDisplays the projector name used to identify the projector when connected to a network.
ResetYou can reset all adjustment values for the Network menu to their default settings.
To return all menu items to their default settings, see sp.95
Sub Menu
Function 
						

							List of Functions
78
* When inputting numbers and passwords, the following software keyboards are displayed. Use the [h] button on the remote control to move the cursor to the target 
key, and then press the [Enter] button. Enter figures by holding down the [Num] button on the Remote Control and pressing the numeric buttons. After inputting, 
select Finish on the keyboard to confirm your input. Select Cancel on the keyboard to cancel your input.
Network Menu (PowerLite Pro Z8050WNL)
For information on the PowerLite Pro Z8000WUNL Network menu, see sp.75.
Each time the CAPS key is selected, it sets and changes between upper case 
and lower case letters. Each time the SYM1/2 key is selected, it sets and 
changes the symbol keys for the section enclosed by the frame. 
						

							List of Functions
79
When Network Protect is set to On in Password Protect, a message is displayed and the settings cannot be changed. You can make changes after setting 
Network Protect to Off. sp.60
By using the Web browser of a computer connected to the projector on a network, you can set the projector's functions and control the projector. This 
function is called "Web control". You can easily enter text using a keyboard to make settings for Web control such as security settings. See your Network 
Operation Guide for more information.
Sub Menu
Function
Network ConfigurationThe following menus are available for setting network items.
Basic, Wireless LAN, Security, Wired LAN, Mail, Others, Reset and Setup complete. 
						

							List of Functions
80
Notes on operating the network menu
Selecting from the top menu and sub menus, and changing of selected items are the same as operations in the configuration menu.
When done, make sure you go to the Setup complete, and select Yes, No, or Cancel. When you select Yes or No, you return to the configuration menu.
Yes: Saves the settings and exits the Network menu.
No: Exits to the Network menu without saving the settings.
Cancel: Continues displaying the Network menu.