Epson Powerlite Pro Z8050wnl Users Guide

							Saving a User's Logo
131
Saving a User's Logo
You can save the image that is currently being projected as a User's Logo. 
When a User's Logo is saved, the previous User's Logo is erased and the 
logo cannot be returned to the factory default.
ProcedureA
Project the image you want to use as the User's Logo, and 
then press the [Menu] button. 
B
Select Extended - "User's Logo" from the configuration 
menu. s"Using the Configuration Menu"
If User's Logo Protect from Password Protect is set to On, a mes-
sage is displayed and the user's logo cannot be changed. You can 
make changes after setting User's Logo Protect to Off.sp.60
If User's Logo is selected when Keystone, E-Zoom, Aspect, or Pro-
gressive are being performed, the function currently being per-
formed is cancelled.
C
When "Choose this image as the User's Logo?" is displayed, 
select "Yes".
When you press the [Enter] button on the Remote Control or the 
Control panel, the screen size may change according to the signal 
as it changes to the resolution of the image signal.
Using the Remote Control Using the Control panel 
						

							Saving a User's Logo
132
D
Move the box to select the part of the image to use as the 
User's Logo. 
Your User’s Logo image can have a resolution up to 400^ 300.
E
When "Select this image?" is displayed, select "Yes". 
F
Select the zoom factor from the zoom setting screen. 
400% is only displayed when you’re using the PowerLite Pro 
Z8000WUNL.
G
When the message "Save this image as the User's Logo?" is 
displayed, select "Yes". 
The image is saved. After the image has been saved, the message 
"Completed. " is displayed. 
Saving the user's logo may take approximately 15 seconds. Do not 
use the projector or any connected equipment while it is saving, 
otherwise malfunctions may occur.
Using the Remote Control Using the Control panel 
						

							Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro Z8050WNL only)
133
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro 
Z8050WNL only)
There are two methods for setting WPS.
•Push Button Method
SSID and security are set automatically when the [Enter] button is 
pressed on the projector's control panel and the dedicated button on 
the access point equipment. This method is recommended when the 
projector and access point are close together.
•PIN Code Method
SSID and security are set automatically by inputting an 8-digit code 
that was assigned to the projector from the computer to the access 
point in advance. Make connection settings between the computer and 
the access point in advance. For details on how to make this 
connection, refer to the manual provided with the access point. This 
method is recommended when the projector is mounted on the ceiling.
Connection Setup Method
ProcedureA
During projection, press the [Menu] button and select 
Network - "Network Configuration" from the configuration 
menu.
The Network Configuration screen is displayed. 
						

							Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro Z8050WNL only)
134
B
From "Wireless LAN" select "To Setup Wizard".
The following screen is displayed.
When connecting using the Push Button Method, follow the steps 
given below.
Go to "Making a connection using the PIN Code Method" when 
connecting using the "PIN Code Method". sp.135
Making a Connection Using the Push Button Method
ProcedureA
Select "Push Button Method".
The Push Button Method screen is displayed.
B
Press the [Enter] button on the projector's control panel 
when prompted by the screen.
Then, the Push Button Method screen is displayed. 
						

							Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro Z8050WNL only)
135
C
Press the button on the access point when prompted by the 
screen.
This completes the setup.
D
Press the [Enter] button or the [Esc] button.
The Wireless LAN menu screen is displayed.
E
Select "Yes" from "Setup complete".
This completes the setup of the connection between the projector 
and the access point. Press the [Menu] button to close the configu-
ration menu.
Making a connection using the PIN Code Method
Before you can make a connection using the "PIN Code Method", a 
connection must have already been setup between the computer and the 
access point. 
						

							Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro Z8050WNL only)
136
ProcedureA
Select "PIN Code Method".
The PIN Code Method screen is displayed.
B
Enter the PIN code displayed on the "PIN Code Method" 
screen from the computer to the access point, and then 
select "Start Setup".
The progress is displayed. 
						

							Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (PowerLite Pro Z8050WNL only)
137
C
The message "Setup by Wi-Fi Protected Setup complete." is 
displayed. Press the [Enter] button or the [Esc] button.
The Wireless LAN menu screen is displayed.
D
Select "Yes" from "Setup complete".
This completes the setup of the connection between the projector 
and the access point. Press the [Menu] button to close the configu-
ration menu. 
						

							Connecting a LAN Cable
138
Connecting a LAN Cable
Connect with a 100BASE-TX or 10BASE-T LAN cable (not included).
The illustration in this section shows the PowerLite Pro Z8000WUNL. If 
you are using the PowerLite Pro Z8050WNL, the projector and interfaces 
are slightly different.
Caution:
To prevent malfunctions, use a category 5 shielded LAN cable.1 To LAN port
2 LAN cable (commercially available)
3 To LAN port 
						

							Connecting to an external monitor
139
Connecting to an external monitor
Analog RGB images input through the Computer or BNC ports can be 
displayed on an external monitor and the screen at the same time. You 
can check projected images on an external monitor when giving 
presentations even if you cannot see the screen. Connect using the cable 
supplied with the external monitor.
Component video signals cannot be output to an external monitor. 
Additionally, signals input through any ports other than the Computer 
or BNC ports cannot be output to an external monitor.
Setting gauges such as Keystone, the configuration menu, or Help 
screens are not output to the external monitor.
1 To Monitor Out port
2 Cable supplied with monitor
3 To Monitor port 
						

							Removing and Attaching the Projector Lens Unit
140
Removing and Attaching the Projector Lens UnitRemovingCaution:•Only remove the lens unit when necessary. If dust or dirt enter the projector, 
projection quality deteriorates and it could cause a malfunction.
•Try not to touch the lens with your hand or fingers. If fingerprints or oils are left on 
the surface of the lens, projection quality deteriorates.
•Before replacing the lens unit, use the lens shift function to horizontally and 
vertically center the lens.
ProcedureA
Remove the interface cover.
B
Remove the front cover.
1 Loosen the screw.
2 While pulling up the interface cover open switch, pull the 
interface cover straight out.
1 Loosen the two screws.
2 Loosen the screw.
3 Pull the cover straight out.